Sterically stabilized emulsion polymerization of styrene: Pseudo‐semicontinuous approach

The sterically stabilized emulsion polymerization of styrene initiated by a water‐soluble initiator at different temperatures has been investigated. The rate of polymerization (R_p) versus conversion curve shows the two non‐stationary‐rate intervals typical for the polymerization proceeding under non‐stationary‐state conditions. The shape of the R_p versus conversion curve results from two opposite effects—the increased number of particles and the decreased monomer concentration at reaction loci as the polymerization advances. At elevated temperatures the monomer emulsion equilibrates to a two‐phase or three‐phase system. The upper phase is transparent (monomer), and the lower one is blue colored, typical for microemulsion. After stirring such a multiphase system and initiation of polymerization, the initial coarse polymer emulsion was formed. The average size of monomer/polymer particles strongly decreased up to about 40% conversion and then leveled off. The initial large particles are assumed to be highly monomer‐swollen particles formed by the heteroagglomeration of unstable polymer particles and monomer droplets. The size of the “highly monomer” swollen particles continuously decreases with conversion, and they merge with the growing particles at about 40–50% conversion. The monomer droplets and/or large highly monomer‐swollen polymer particles also serve as a reservoir of monomer and emulsifier. The continuous release of nonionic (hydrophobic) emulsifier from the monomer phase increases the colloidal stability of primary particles and the number of polymer particles, that is, the particle nucleation is shifted to the higher conversion region. Variations of the square and cube of the mean droplet radius with aging time indicate that neither the coalescence nor the Ostwald ripening is the main driving force for the droplet instability. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 804–820, 2003     

An “Instrumental Approach” to Study the Integration of a Computer Tool Into Mathematics Teaching: the Case of Spreadsheets

This article reports on research focused on the integration of a specific computer tool, the spreadsheet, into mathematics teaching. After presenting some important results obtained by research in this area, we revisit these in the light of an instrumental approach, which we perceive as essential to analyse the construction of mathematical meanings in spreadsheet environments and to understand better the questions of technological integration. Then, these theoretical elements are used in order to design an exploratory experiment with grade 7 pupils and analyse its results.     

纵波模拟演示装置

介绍了一种纵波模拟演示装置，并给出了其结构要点及演示效果，实现了对纵波行波的演示。     

Determination of the rheological behavior of epoxy–amine thermosets by dynamic mechanical analysis: Isothermal methods versus nonisothermal methods

The reticulation process of an epoxy resin using an amine as a cure agent was studied at different temperatures and concentrations of the cure agent with dynamic mechanical thermal analysis. The study was performed under both isothermal and nonisothermal conditions, and a temperature–time–transformation diagram was obtained. The measurements from the two modes gave similar results, although the nonisothermal mode required fewer experiments. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1965–1977, 2003     

Reversible 5′-end biotinylation and affinity purification of synthetic RNA

A reversible biotinylation phosphoramidite was synthesized and incorporated onto the 5′-end of an oligoribonucleotide on a solid phase synthesizer. After cleavage and deprotection, the crude synthetic oligomer mixture was incubated with NeutrAvidin^® coated microspheres, and the failure sequences removed by washing with a buffer followed by treating the microspheres with tetrabutylammonium fluoride to give a high quality unmodified full-length oligoribonucleotide.     

Thiol–norbornene materials: Approaches to develop high Tg thiol–ene polymers

The ability to prepare high T_g low shrinkage thiol–ene materials is attractive for applications such as coatings and dental restoratives. However, thiol and nonacrylated vinyl materials typically consist of a flexible backbone, limiting the utility of these polymers. Hence, it is of importance to synthesize and investigate thiol and vinyl materials of varying backbone chemistry and stiffness. Here, we investigate the effect of backbone chemistry and functionality of norbornene resins on polymerization kinetics and glass transition temperature (T_g) for several thiol–norbornene materials. Results indicate that T_gs as high as 94 °C are achievable in thiol–norbornene resins of appropriately controlled chemistry. Furthermore, both the backbone chemistry and the norbornene moiety are important factors in the development of high T_g materials. In particular, as much as a 70 °C increase in T_g was observed in a norbornene–thiol specimen when compared with a sample prepared using allyl ether monomer of analogous backbone chemistry. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5686–5696, 2007     

Characteristics in optimization of CGH for array generator

A method of simulated annealing in optimization of a computer generated holo-gram(CGH)is presented.The characteristics of energy in annealing curve are analyzed.Thecooling schedule such as giving an initial temperature,the temperature function,the numberof interactions and stopping criterion are discussed.As an example,an optimization of phaserelief kinoform,a CGH with multiple phase levels,is implemented.     

The unsatisfiability threshold revisited

The problem of determining the unsatisfiability threshold for random 3-SAT formulas consists in determining the clause to variable ratio that marks the experimentally observed abrupt change from almost surely satisfiable formulas to almost surely unsatisfiable. Up to now, there have been rigorously established increasingly better lower and upper bounds to the actual threshold value. In this paper, we consider the problem of bounding the threshold value from above using methods that, we believe, are of interest on their own right. More specifically, we show how the method of local maximum satisfying truth assignments can be combined with results for the occupancy problem in schemes of random allocation of balls into bins in order to achieve an upper bound for the unsatisfiability threshold less than 4.571. In order to obtain this value, we establish a bound on the q-binomial coefficients (a generalization of the binomial coefficients). No such bound was previously known, despite the extensive literature on q-binomial coefficients. Finally, to prove our result we had to establish certain relations among the conditional probabilities of an event in various probabilistic models for random formulas. It turned out that these relations were considerably harder to prove than the corresponding ones for unconditional probabilities, which were previously known.     

利用相位共轭技术补偿光纤中色散效应的条件

利用相位共轭器的频率反转特性的,补偿光纤中的色散效应,在理论上和实验上得到了证明.由色散脉冲的傅里叶交换确定了光纤中二次色散效应可以被忽略的条件,得到了共轭器的反射率和带宽与非线性介质的长度L,参数|K|L之间的关系曲线,找到了影响补偿效果的主要因素.