Thermal Analysis in Examination of Reduction of Blast Furnace Pellets

This paper presents applications of thermal analysis to observe the course of reduction of acidic pellets, metallurgical substances whose reducibility and strength are basic parameters of use in blast furnace processes. Both parameters depend on the mineral composition of the samples. The investigations included determination of the chemical and phase compositions of the initial samples and reduction products. Research was conducted on acidic pellets from Połtawa (Poland), applied in the T. Sendzimir Steelworks (Poland), in comparison with pellets from Brazil, Canada and Lebedyn (Russia). This revised version was published online in August 2006 with corrections to the Cover Date.     

Structural and electrical properties of crystalline (1−x)Ta2O5−xTiO2 thin films fabricated by metalorganic decomposition

Polycrystalline (1−x)Ta₂O₅−xTiO₂ thin films were formed on Si by metalorganic decomposition (MOD) and annealed at various temperatures. As-deposited films were in the amorphous state and were completely transformed to crystalline after annealing above 600 °C. During crystallization, a thin interfacial SiO₂ layer was formed at the (1−x)Ta₂O₅−xTiO₂/Si interface. Thin films with 0.92Ta₂O₅–0.08TiO₂ composition exhibited superior insulating properties. The measured dielectric constant and dissipation factor at 1 MHz were 9 and 0.015, respectively, for films annealed at 900 °C. The interface trap density was 2.5×10¹¹ cm⁻² eV⁻¹, and flatband voltage was −0.38 V. A charge storage density of 22.8 fC/μm² was obtained at an applied electric field of 3 MV/cm. The leakage current density was lower than 4×10⁻⁹ A/cm² up to an applied electric field of 6 MV/cm.     

Metal complexation of crosslinked polyacrylamide-supported dithiocarbamates: Effect of the molecular character and extent of crosslinking on complexation

Dithiocarbamate functions were incorporated into different polyacrylamide matrices crosslinked with a flexible and hydrophilic crosslinking agent, tetraethyleneglycol diacrylate (TEGDA), and their complexation behaviours were investigated. Crosslinked polyacrylamides with varying extents of the tetrafunctional TEGDA crosslinks were prepared by free radical solution polymerization at 60°C using potassium persulphate as initiator in ethanol. The dithiocarbamate functionality was incorporated into these polyacrylamides by a two-step polymer-analogous reaction involving (i)trans-amidation with ethylenediamine and (ii) dithiocarbamylation of the aminopolyacrylamide with carbon disulphide and alkali. The complexations of dithiocarbamate with Cu(II), Ni(II), Zn(II), Co(II) and Hg(II) ions were followed under different conditions. The metal ion intake varied with the extent of the crosslinking agent and the observed trend in complexation is Hg(II) > Cu(II)> Zn(II)> Co(II)> Ni (II). The time-course of complexation, the possibility of recycling, swelling characteristics, and spectral and thermal analyses were carried out. The thermal stability increases upon complexation with metal ions.     

Thermal Behavior of Urea-(D) Tartaric Acid and Urea-(DL) Tartaric Acid Crystals

The thermal behavior of two new non-linear optical (NLO) materials, urea-(D) tartaric acid (UDT) and urea-(DL) tartaric acid (UDLT) were studied by using DSC, TG and TMA. The results show that: 1) The two crystals have different melting points but similar decomposition temperatures due to the influences of intermolecular forces, which is attributed to the stereo effects of (D)-tartaric and (DL)-tartaric acid molecules; 2) There was only thermal expansion and no thermal contraction when the UDT and UDLT crystals were heated; 3) There was no phase transition within the measured temperature range; 4) The thermal expansion of the UDT and UDLT crystals shows a small anisotropy; 5) The specific heats of UDT and UDLT change linearly with temperature in the measured temperature range and the value for UDT is 1.321 J g-1 K-1 at 320 K while the specific heat of UDLT is 1.357 J g-1 K-1 at the same temperature. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermal decomposition of transition metal carboxylates

Dynamics of changes in microstresses during thermal decomposition of Cu(HCOO)₂ crystals and their effect on the thermal decomposition kinetics were studied by IR spectroscopy at 105 to 120 °C. The formation of solid intermediate HCOOCu was observed, and the dynamics of its accumulation was followed. Kinetic regularities of transformation of HCOO groups were compared with those for gas evolution.For Communication 1, see Ref. 1.Translated from Izvestiya va Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 350–354, February, 1996.     

Dimensionally and thermally stable polymer,containing disordered graphitic structure and adamantane

In an attempt to develop a low‐k interlayer dielectric, adamantane‐diphenyldiethynyl moiety containing oligomer is prepared. Oligomerization of 1,3,5,7‐tetrakis[3/4‐ethynylphenyl]adamantane ( 4 ) is accomplished by a Glaser–Hay oxidative coupling with 1,3,5‐triethynylbenzene and phenylacetylene end‐capping agent. The CHCl₃ soluble oligomer is then thermally treated by step‐curing at 200, 300, 380, and 450 °C for 30 min at each temperature under nitrogen flow to render a shiny void‐free black polymer. TGA analysis indicates that the polymer is stable under nitrogen up to 500 °C with a marginal decomposition up to 800 °C. Solid‐state ¹³C NMR, Raman scattering, and FTIR are used to characterize the structure of the polymer. The polymer consists of amorphous carbon networks with the adamantane moieties and nanosized graphitic regions (clusters), which are generated from the thermal crosslinking of the diphenyldiethynyl units. It shows a remarkably low linear coefficient of thermal expansion (～25 ppm/°C), presumably due to the presence of the disordered graphitic structure. Its high density (～1.21 g/cm³), refractive index (～1.80 at 632 nm), and Young's modulus (～17.0 GPa) are also consistent with the interpretation. This study reveals important details about the effect of microscopic structure on the macroscopic properties of the highly crosslinked polymer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6909–6925, 2006     

InAs/GaSb superlattice focal plane arrays for high-resolution thermal imaging

The first fully operational mid-IR (3–5 μm) 256×256 IR-FPA camera system based on a type-II InAs/GaSb short-period superlattice showing an excellent noise equivalent temperature difference below 10 mK and a very uniform performance has been realized. We report on the development and fabrication of the detecor chip, i.e., epitaxy, processing technology and electro-optical characterization of fully integrated InAs/GaSb superlattice focal plane arrays. While the superlattice design employed for the first demonstrator camera yielded a quantum efficiency around 30%, a superlattice structure grown with a thicker active layer and an optimized V/III BEP ratio during growth of the InAs layers exhibits a significant increase in quantum efficiency. Quantitative responsivity measurements reveal a quantum efficiency of about 60% for InAs/GaSb superlattice focal plane arrays after implementing this design improvement. The paper presented there appears in Infrared Photoelectronics, edited by Antoni Rogalski, Eustace L. Dereniak, Fiodor F. Sizov, Proc. SPIE Vol. 5957, 595707 (2005).     

Crosslinked epoxy materials exhibiting thermal remendablility and removability from multifunctional maleimide and furan compounds

Crosslinked polymeric materials, which exhibit thermal remendability and removability through Diels–Alder (DA) and retro‐DA reactions, were obtained from using multifunctional maleimide and furan compounds as monomers. The synthesized monomers possess low melting points and good solubility in organo solvents to show excellent processing properties. The performance of DA and retro‐DA reactions were demonstrated with DSC and FTIR measurements. High performance of thermal remendablility and removability of the crosslinked materials were observed with SEM and solvent tests. These materials were applicable in advanced encapsulants and structural materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 905–913, 2006