Time stability of water activated by different on-liquid atmospheric pressure plasmas

Two atmospheric pressure micro-jets generated in helium or argon and an air micro-arc discharge were used to obtain plasma activated water. The new water properties depend on the plasma gas, treatment time and treated volume. The higher concentration of hydrogen peroxide is associated with the argon discharge while the higher concentration of nitrogen based species and the higher modifications of pH and of electrical conductivity are associated with the air discharge. The properties of the treated water (pH and electrical conductivity) and the concentrations of hydrogen peroxide and of nitric acid show very small variations over three weeks after treatment.     

三核铁甲酸簇合物[Fe_3(μ_3-O)(μ-O_2CH)_6(H_2O)_2(O_2CH)]·2H_2O在乙炔、水汽体系中的反应行为

本文研究了[Fe_3(μ_3-O)(μ-O_2CH)_6(H_2O)_2(O_2CH)]·2H_2O(简称)在乙炔、水汽体系中的反应行为。发现当温度高于220℃,脱落部分配体的具有活化乙炔进行加成反应的性能。采用原位红外光谱法和气相色谱法对此反应过程进行了跟踪探索,报道了产物的定性及半定量结果。     

分光光度法同时测定铝(Ⅲ)和铁(Ⅱ)

以甲基百里酚蓝(MTB)为显色剂、CTMAB为增溶增敏剂,利用系数补偿和双峰双波长的两次分光光度法同时测定铝(Ⅲ)和铁(Ⅱ)的结果令人满意.     

First-principles study on the electronic structures of iron phthalocyanine monolayer

The electronic band structure and magnetic properties of iron phthalocyanine (FePc) monolayer were investigated by using the first-principles all-electron full-potential linearized augmented plane wave energy band method. It is found that the ferromagnetic FePc monolayer is energetically more stable than the paramagnetic one. The exchange interaction, which splits the majority and minority bands, influences strongly on the electronic structure near the Fermi level (E_F). Magnetic moment of the central Fe atom is calculated to 1.95 μ_B. The range of the positive polarization of Fe site is larger in the out-of-plane than in the in-plane direction. The FePc ligand remains paramagnetic. The presence of states at E_F indicates the metallic character of FePc monolayer both for the paramagnetic and ferromagnetic states. However, the large density of states at E_F of the majority spins in the ferromagnetic state is expected to cause a phase transition to insulating antiferromagnetic state from the metallic ferromagnetic one.     

网纹红土中铁矿物与粘土矿物赋存关系的X射线衍射证据

高纯度的粘土矿物样品是粘土矿物学重建古气候的关键,然而,土壤中的铁矿物(如针铁矿和赤铁矿等)和有机质的存在导致粘土矿物与非粘土矿物相互包裹,使富集的粘土矿物样品常含有其他矿物杂质。土壤沉积物中有机质去除的研究已较为充分,但铁矿物在土壤沉积物中的赋存状态倍受争议,制约了高纯度粘土矿物样品的制备。该研究将以长江中下游九江网纹红土作为研究对象,通过逐级分离试验对网纹红土中铁矿物与粘土矿物的赋存关系进行研究,为土壤沉积物中铁矿物的去除提供一定的启示。试验结果表明,针铁矿和赤铁矿等铁矿物可能主要呈现被膜状吸附在羟基间层蒙脱石和伊利石的表面,也有部分被高岭石吸附。     

几种常见树种叶片光谱秋季变化特征分析

叶片随着时间生长产生变化,其光谱特征也会发生变化。研究相同树种叶片不同时间条件下的光谱变化规律以及不同树种叶片相同时间条件下的光谱特征,不仅为植被叶片光谱随时间变化的规律研究提供理论基础,也是高光谱遥感精确识别植被信息的关键。选取北京市10种常见树种,利用地物光谱仪观测各树种不同时间叶片光谱,同时将观测的光谱进行一阶微分处理和典型波段分析,对比相同时间不同树种叶片光谱的差异,分析相同树种不同时间的光谱变化规律,探索不同时相条件下高光谱遥感识别树种的有效波段。结果表明：不同树种叶片光谱均随时间的改变而产生显著变化,但差异规律各不相同;不同树种相同时间叶片光谱在部分波段存在显著差异,为高精度树种识别提供了理论依据和叶片基础光谱数据。     

Dissociative adsorption and adsorbate-induced reconstruction on Fe{2 1 1}

The products of CO, NO, O₂ and N₂ dissociation on Fe{2 1 1} have been studied by means of first-principles density functional theory. Preferred adsorption sites for adatoms C, N and O are identified, and trends in charge transfer and surface magnetism described. An experimentally observed (2 × 1) reconstruction induced by O is confirmed to be energetically stable, and a similar reconstruction induced by N is tentatively predicted. It is argued that these reconstructions may be important not only in the context of the catalytic reactivity of the Fe{2 1 1} surface, but also for the initial stages of surface nitridation and oxidation.     

Strain state in bcc Fe films grown on Si(1 1 1)

The strain state of Fe films grown on Si(1 1 1) has been investigated by X-ray diffraction (XRD) in the thickness range between 11 and 304 monolayers. Fe grows tetragonally distorted with the orientation relationship Fe(1 1 1) // Si(1 1 1) . At low coverage, the films grow pseudomorphic. Above 15 monolayers the films are characterized by the coexistence of a pseudomorphic phase with another one which relaxes with the Fe thickness. This relaxation proceeds rapidly in the earlier stages then slowly with the film thickness. The XRD characterization allows one to obtain quantitative information on the in-plane and out-of-plane strains.     

Preparation and characterization of iron oxide thin films by spray pyrolysis using methanolic and ethanolic solutions

Iron oxide thin films have been obtained by spray pyrolysis using 100% methanolic and ethanolic solutions of iron tri-chloride. The films were deposited onto ITO-coated glass substrates. The preparative conditions have been optimized to obtain compact, pin-hole-free and smooth thin films which are adherent to the substrate. The structural, morphological and compositional characterizations have been carried out by X-ray diffraction, scanning electron microscopy and energy dispersive X-ray analysis. The films deposited using ethanolic solution results into pure hematite; α-Fe₂O₃ thin films, however, films deposited using methanolic solution consists of hematite and maghemite-c phases of iron oxide. The films are nanocrystalline with particle size of 30-40 nm. The optical absorbance of the film was of the order of 10⁵ cm⁻¹. The optical band gap of films was found to be 2.26 and 2.20 eV for the films deposited using methanolic and ethanolic solutions, respectively.     

Slow positron beam study of corrosion-related defects in pure iron

Corrosion-related defects of pure iron were investigated by measuring Doppler broadening energy spectra (DBES) of positron annihilation and positron annihilation lifetime (PAL). Defect profiles of the S-parameter from DBES as a function of positron incident energy up to 30 keV (i.e. ∼1 μm depth) were analyzed. The DBES data show that S-parameter increases as a function of positron incident energy (mean depth) after corrosion, and the increase in the S-parameter is larger near the surface than in the bulk due to corrosion. Furthermore, information on defect size from PAL data as a function of positron incident energy up to 10 keV (i.e. ∼0.2 μm depth) was analyzed. In the two-state trapping model, the lifetime τ₂ = 500 ps is ascribed to annihilation of positrons in voids with a size of the order of nanometer. τ₁, which decreases with depth from the surface to the bulk, is ascribed to the annihilation of positrons in dislocations and three-dimensional vacancy clusters. The corroded samples show a significant increase in τ₁ and the intensity I₂, and near the surface the corroded iron introduces both voids and large-size three-dimensional vacancy clusters. The size of vacancy clusters decreases with depth.