Electrocatalysis of Metalloporphyrins(Ⅷ)——Electrocatalytic Reduction of Molecular Oxygen with Water-Soluble Cobalt (Ⅱ) Tetrakis(4-Trimethyl Ammonium Phenyl) Porphyrin Catalyst

Reported here is the electrocatalytic reduction of molecular oxygen in the presence of water-soluble cobalt(Ⅱ) tetrakis(4-trimethyl ammonium phenyl) porphyrin (Co(Ⅱ)TTAPP) as catalyst in solutions of various pH values. The overpotential of molecular oxygen reduction is reduced by ca. 200-400 mV in acidic and neutral solutions compared with several decades of millivolts in alkaline solutions, indicating that Co(Ⅱ)TTAPP possesses much higher catalytic activity in acidic and neutral solutions than in alkaline. H2TTAPP in solutions of various pH exhibits no significant catalytic activity for oxygen reduction. The significant difference in the electrocatalytic activity of Co(Ⅱ)TTAPP from that of H2TTAPP for oxygen reduction indicates that the electrocatalytic activity of Co(Ⅱ)TTAPP should be attributed to the central cobalt atom (Co(Ⅱ)) coordinated by N4 internal ring in Co(Ⅱ)TTAPP. The total number of electrons involved in oxygen reduction electrocatalyzed by Co (Ⅱ)TTAPP is 2, and the product of suc     

Impedance study of Ni–Co electro-deposition on Fe powder particles in fluidised bed systems

The electrochemical impedance method was applied during the electrochemical deposition of a binary Ni–Co coating on iron powder in a fluidised bed electrode system. The influence of the suspension density on the charge transfer in the course of the electro-deposition process was studied. At a potential of −900 mV (vs. Ag/AgCl/3 M KCl), when the binary Ni–Co layer was formed, the impedance data were characterised by two semicircles with the semicircle at high frequencies being larger in magnitude. A contribution of the diffusion process to the overall current was observed. The optimal suspension density for the charge transfer in the bed was 10×10⁻³–15×10⁻³ (i.e., 4–6 g of iron powder in 50 ml of electrolyte). The most probable mechanism of the charge transfer for the studied concentrations of powder particles is the convective mechanism. The iron particles dispersed in the electrolyte were considered to act as either a depolariser or an additional working electrode depending on the applied electrode potential and on the suspension density.     

Synthesis of brominated 2-(tert-butyl-NNO-azoxy)anilmes

2-(tert-Butyl-NNO-azoxy)aniline was prepared by selective reduction of 2-(tert-butyl-NNO-azoxy)nitrobenzene. Its bromination yielded the correspondingpara-bromo- andortho, para-dibromoanilines (3a,b).meta-Bromoanilines (6a,b) were synthesized by selective replacement of theortho-bromine atoms in ortho,para-bromo(tert-butylazoxy)benzenes (5a,b) by ammonia in toluene under pressure.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1620–1623, September, 1994.This work was carried out with the financial support of the Russian Foundation for Basic Research (Project No. 93-03-18461).     

A downsized flow set up based on multicommutation for the sequential photometric determination of iron(II)/iron(III) and nitrite/nitrate in surface water

In this work, a downsized flow set up designed based on multicommutation concept for photometric determination of iron(II)/iron(III) and nitrite/nitrate is surface water is described. The flow system network comprised a set of three-way solenoid valves, reaction coil and a double-channel flow cell, which were nested in order to obtain a compact and small-size instrument. To accomplish the downsizing requirement light source (LED) and radiation detection (phototransistor) were coupled to the flow cell. In order to demonstrated the effectiveness of the system, the photometer methods based on Griess reaction and 1-10-phenantroline for nitrite and iron(II) determination, respectively, were selected. Under computer control the set up provided facilities to handle four reagent solutions employing a single pumping channel, thus permitting also the determination of nitrate and iron(III) after its reduction to nitrite and to iron(II), respectively. The overall system performance was demonstrated working several days running standard solution, no significant variation of base line, linear response range and slop (less than 1%) were observed. The usefulness of the downsized system was ascertained by analyzing a set of surface water. Aiming to access the accuracy sample were also analyzed employing reference procedures and no significant difference at 95% confidence level were observed for the four analytes. Other profitable features such as analytical throughput of 40 determination per hour; relative standard deviation of 1%; linear response range between 50 and 300 μg l⁻¹ for nitrite and nitrate, 0.5-6.0 mg l⁻¹ iron(II) and iron(III); low reagent consumption 75 μg for nitrate/nitrite and 0.6 mg for iron(II)/iron(III) per determination; and 2.4 ml waste generation per determination were also achieved.     

乙醇对合成醇用Cu-Co-Fe催化剂的修饰效应

乙醇对合成醇用Ｃｕ┐Ｃｏ┐Ｆｅ催化剂的修饰效应徐杰王向宇杜宝石（郑州大学化学系，郑州４５００５２）辛勤李灿（中国科学院大连化学物理研究所，大连１１６０２３）关键词铜，钴，铁，合成醇，乙醇，修饰作用分类号Ｏ６４３／Ｏ６４７自７０年代以来，已对多种ＣＯ加...     

Synthesis of Ultrafine SiC Powders from Carbon-Silica Hybridized Precursors with Carbothermic Reduction

Inorganic-organic hybrid gels were prepared by simultaneous condensation of the liquid mixture of ethyl silicate, ethyl borate and water soluble phenol resin with low molecular weight. The liquid mixtures were changed into lightly colored transparent gels after a catalyst addition and stirring. The obtained gels were crushed, dried and fired in controlled conditions to yield the inorganic precursors. Since the tailored inorganic precursors mainly consisted of SiO2 and carbon, silicon carbide was formed with the heat treatments in an Ar atmosphere beyond 1773 K with carbothermic reduction. The properties and morphology of the formed silicon carbide powders in terms of the starting precursor compositions and the conditions of the carbothermic reduction were investigated with SEM, XRD and TG-DTA analysis.     

Pd（OAc）2／FePc催化环己烯氧化合成环己酮的研究

考察了几种Ｆｅ－大环配合物与Ｐｄ（ＯＡｃ）２组成的双组分催化体系，在乙腈酸性水溶液中环己烯经合成环己酮的催化活性，实验结果表明，其中以酞菁失（ＦｅＰｃ）与Ｐｄ（ＯＡｃ）２组成的催化体系活性最高，而ＦｅＴＰＰＣｌ与Ｐｄ（ＯＡｃ）２催化体系，虽然催化活性较高，但催化剂的稳定性较低，各种因素对Ｐｄ（ＯＡｃ）２／ＦｅＰｃ催化活催化影响的研究结果指出，在无水和酸存在的非水溶液中，Ｐｄ（ＯＡｃ）２／ＦｅＰｃ对     

Alkylation of cobalt and lutetium tetra(3,5-di-tert-butyl-4-hydroxyphenyl)dodecachlorophthalocyanine complexes initiated with current

Electrochemical properties of tetra(3,5-di-tert-butyl-4-hydroxyphenyl)dodecachlorophthalocyanine complexes of cobalt(II) and lutetium(III) in DMF solutions have been studied. It was suggested that in the presence ofn-butyl bromide, the electrochemically generated monoanionic complexes undergo alkylation at the metal atom. The geometries of the neutral and anionic complexes were calculated by the ZINDO/I semiempirical method. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 289–293, February, 1998.     

Preparation of Silver Nanoparticles through Alcohol Reduction with Organoalkoxysilanes

Silver nanoparticles of narrow size distribution were prepared through the chemical reduction in an alcohol solution with several organoalkoxysilanes. In this system, organoalkoxysilanes served as a stabilizer, protecting silver nanoparticles from aggregation. The changes in size and morphology of colloidal silver nanoparticles were investigated with the addition of organoalkoxysilanes such as 3-aminopropyltriethoxysilane (APS), methyltriethoxysilane (MTS), phenyltrimethoxysilane (PTS), vinyltriethoxysilane (VTS), and 3-glycidoxypropyltrimethoxysilane (GPS) as stabilizers. The organic functional groups of organoalkoxysilanes interact with silver ions and clusters, which stabilize silver nanoparticles in the system. The silver nanoparticles obtained were characterized with transmission electron microscopy (TEM), UV-vis spectroscopy, etc.     

Electrochemical reduction of cobalt and nickel complexes with ligands stabilizing metal in low oxidation state

Electrochemical reduction of cobalt(ii) complexes containing -acceptor ligands (L = bpy, Ph₂Ppy) proceeds through three consecutive reversible steps: one-electron transfer to form a more stable Co^IL complex, transfer of two electrons at more negative potentials to form an anionic [NiL]^– complex, and reduction of the ligand to the radical anion. The stability of the cobalt complexes with different ligands decreases in the series Ph₂Ppy > Ph₃P > bpy.