Formation of Iron Macro-Spheres in Plasma

In this paper the formation mechanism of iron macro-spheres in a plasma medium is dealt with, including the conditions under which such spheres are formed. The geometry of the spheres referred to above depends on the main technological parameters involved in the production of pores. Conditions under which pores occur within macro-spheres are also established. The radii of these pores are sensitive to the velocity distribution within the plasma jet section     

Synthese,Strukturuntersuchung und Reaktionen Phosphansubstituierter Derivate von Fe3(CO)9(μ3-CF)2

Syntheses, Structure Determination and Reactions of Phosphine Substituted Derivatives of Fe₃(CO)₉(μ₃-CF)₂ Photolysis of Fe₃(CO)₉(μ₃-CF)₂ 1 in the presence of acetonitrile 2a or benzoenitrile 2b results in the substitution of a single carbonyl ligand by a nitrile ligand yielding Fe₃(CO)₈(CH₃CN)(μ₃-CF)₂ 3a and Fe₃(CO)₈(C₆H₅CN)(μ₃-CF)₂ 3b, respectively. The acetonitrile ligand in 3a can be easily replaced by trimethyl-phosphine 4a or triphenylphosphine 4b . The monosubstituted compounds Fe₃(CO)₈(PR₃)(μ₃-CF)₂5, R = CH₃ a, R = C₆H₅, b are obtained as major products besides a small amount of the disubsituted products Fe₃(CO)₇(PR₃)₂(μ₃-CF)₂ 6. The structure of 5a has been elucidated by a single crystal X-ray structure determination. Thermal ligand substitution in 1, however, results in the formation of a mixture of mono-, disubstituted, and trisubstituted products, in which 6b is the major product for diphenylphosphine. 5a reacts with ethyne 7 forming a phosphine substituted diferra-allyl-cluster Fe₃(CO)₇(PR₃)(μ₃-CF)(μ₃? CF? CH? CH) 8. The structure of one isomere of 8 has been determinated by X-ray crystallography.     

停留—催化反应速差动力学法同时测定Fe,Mo

根据Ｆｅ（Ⅲ）、Ｍｏ（Ⅵ）对Ｈ２Ｏ２氧化邻氨基酚的催化反应速率不同，结合流动注射停留技术，建立了同时测定Ｆｅ（Ⅲ）、Ｍｏ（Ⅵ）的速差动力学分光光度法．测定铁和钼的线性范围分别为０．１～２．５μｇ／ｍＬ和０．５～１５μｇ／ｍＬ．除Ｗ（Ⅵ）的允许量较小外，其它离子不干扰测定．用本法测定了合成样液中铁和钼含量，结果满意．     

一阶导数吸光光度法同时测定纯硅中铁和铝的研究

提出了用一阶导数光光度法同时测定铁和铝的方法，在ｐＨ６．５乙二胺缓冲溶液中，乳化剂ＯＰ存在下，Ｆｅ＾３＋Ａｌ＾３＋与络天青Ｓ形成Ｆｅ＾３＋，Ａｌ＾３＋－ＣＡＳ－ＯＰ三元络合物，络合物一阶导数光谱等吸收点分别在６０６．２，６３８．０ｎｍ记录混合体系在两波长处一阶导数数值可以分别测定铝，铁含量，互不影响，铁，铝含量分别在１．０～１６μｇ／２５ｍｌ，０．３～１０μｇ／２５ｍｌ范围内呈良好线性，用于测定纯     

Impedance study of Ni–Co electro-deposition on Fe powder particles in fluidised bed systems

The electrochemical impedance method was applied during the electrochemical deposition of a binary Ni–Co coating on iron powder in a fluidised bed electrode system. The influence of the suspension density on the charge transfer in the course of the electro-deposition process was studied. At a potential of −900 mV (vs. Ag/AgCl/3 M KCl), when the binary Ni–Co layer was formed, the impedance data were characterised by two semicircles with the semicircle at high frequencies being larger in magnitude. A contribution of the diffusion process to the overall current was observed. The optimal suspension density for the charge transfer in the bed was 10×10⁻³–15×10⁻³ (i.e., 4–6 g of iron powder in 50 ml of electrolyte). The most probable mechanism of the charge transfer for the studied concentrations of powder particles is the convective mechanism. The iron particles dispersed in the electrolyte were considered to act as either a depolariser or an additional working electrode depending on the applied electrode potential and on the suspension density.     

Synthesis and characterization of monodisperse magnetic composite particles for magnetorheological fluid materials

Monodisperse magnetic composite particles (MCP) were prepared and characterized for a study of magnetic field-responsive fluids. Magnetic composite particles used are iron oxide-coated polymer composite particles, which were synthesized through in situ coating of iron oxide onto pre-existing polymer particles by the reduction of ferrous fluids. For a uniform and bulk coating of iron oxide, the porous structure was introduced into the substrate polymer particles through a two-step seeded polymerization method. Moreover, surface cyano-functionality was born from acrylonitrile unit of substrate polymer and it played an important role in obtaining successful uniform coating. The structure of the composite particle was analyzed by using a thermo gravimetric analysis (TGA) and a X-ray diffraction (XRD) analysis. The magnetization property of the particle was also observed. Then, the rheological properties of monodisperse magnetorheological (MR) suspensions of magnetic composite particles were examined under a magnetic field using a parallel-plate type commercial rheometer. From the rheological measurements, it was found that MR properties of the magnetic composite suspensions are dependent on the iron oxide content and the fluid composition.     

A downsized flow set up based on multicommutation for the sequential photometric determination of iron(II)/iron(III) and nitrite/nitrate in surface water

In this work, a downsized flow set up designed based on multicommutation concept for photometric determination of iron(II)/iron(III) and nitrite/nitrate is surface water is described. The flow system network comprised a set of three-way solenoid valves, reaction coil and a double-channel flow cell, which were nested in order to obtain a compact and small-size instrument. To accomplish the downsizing requirement light source (LED) and radiation detection (phototransistor) were coupled to the flow cell. In order to demonstrated the effectiveness of the system, the photometer methods based on Griess reaction and 1-10-phenantroline for nitrite and iron(II) determination, respectively, were selected. Under computer control the set up provided facilities to handle four reagent solutions employing a single pumping channel, thus permitting also the determination of nitrate and iron(III) after its reduction to nitrite and to iron(II), respectively. The overall system performance was demonstrated working several days running standard solution, no significant variation of base line, linear response range and slop (less than 1%) were observed. The usefulness of the downsized system was ascertained by analyzing a set of surface water. Aiming to access the accuracy sample were also analyzed employing reference procedures and no significant difference at 95% confidence level were observed for the four analytes. Other profitable features such as analytical throughput of 40 determination per hour; relative standard deviation of 1%; linear response range between 50 and 300 μg l⁻¹ for nitrite and nitrate, 0.5-6.0 mg l⁻¹ iron(II) and iron(III); low reagent consumption 75 μg for nitrate/nitrite and 0.6 mg for iron(II)/iron(III) per determination; and 2.4 ml waste generation per determination were also achieved.     

乙醇对合成醇用Cu-Co-Fe催化剂的修饰效应

乙醇对合成醇用Ｃｕ┐Ｃｏ┐Ｆｅ催化剂的修饰效应徐杰王向宇杜宝石（郑州大学化学系，郑州４５００５２）辛勤李灿（中国科学院大连化学物理研究所，大连１１６０２３）关键词铜，钴，铁，合成醇，乙醇，修饰作用分类号Ｏ６４３／Ｏ６４７自７０年代以来，已对多种ＣＯ加...     

Pd（OAc）2／FePc催化环己烯氧化合成环己酮的研究

考察了几种Ｆｅ－大环配合物与Ｐｄ（ＯＡｃ）２组成的双组分催化体系，在乙腈酸性水溶液中环己烯经合成环己酮的催化活性，实验结果表明，其中以酞菁失（ＦｅＰｃ）与Ｐｄ（ＯＡｃ）２组成的催化体系活性最高，而ＦｅＴＰＰＣｌ与Ｐｄ（ＯＡｃ）２催化体系，虽然催化活性较高，但催化剂的稳定性较低，各种因素对Ｐｄ（ＯＡｃ）２／ＦｅＰｃ催化活催化影响的研究结果指出，在无水和酸存在的非水溶液中，Ｐｄ（ＯＡｃ）２／ＦｅＰｃ对     

ICP—AES卡尔曼滤波同时测定铁基体中26种痕量元素

本文利用电感耦合等离子体原子发射光谱（ＩＣＰ－ＡＥＳ）多色仪的扫描功能，用Ｃ语言编制了Ｋａｌｍａｎ滤波程度软件包，用该软件包对铁基体中２６种痕量元素进行了回收率试验，并对标准碳素钢样中１３种痕量元素进行了测定，结果表明Ｋａｌｍａｎ滤波完全适用于复杂谱线基体中的多种元素同时分析。