Iron-mediated AGET ATRP of styrene and methyl methacrylate using ascorbic acid sodium salt as reducing agent

Atom transfer radical polymerization of styrene(St) and methyl methacrylate(MMA) in bulk and in different solvents using activators generated by electron transfer(AGET ATRP) were investigated in the presence of a limited amount of air using FeCl3·6H2O as the catalyst, ascorbic acid sodium salt(AsAc-Na) as the reducing agent, and a cheap and commercially available tetrabutylammonium bromide(TBABr) as the ligand. It was found that polymerization in THF resulted in shorter induction period than that in bulk and in toluene for AGET ATRP of St, while referring to AGET ATRP of MMA, polymerization in THF showed three advantages compared with that in bulk and toluene: 1) shortening the induction period, 2) enhancing the polymerization rate and 3) having better controllability. The living features of the obtained polymers were verified by chain end analysis and chain-extension experiments.     

Lithium-ion battery separators: Recent developments and state of art

Lithium-ion battery separators are receiving increased consideration from the scientific community. Single-layer and multilayer separators are well-established technologies, and the materials used span from polyolefins to blends and composites of fluorinated polymers. The addition of ceramic nanoparticles and separator coatings improves thermal and mechanical properties, as well as electrolyte uptake and ionic conductivity. The state-of-art separators are actively involved in the cell chemistry through specific functional groups on their surface. Among the numerous properties, safety features and long cycle life are high-priority requirements for next-generation lithium-ion batteries.     

Nonclassical nucleation towards separation and recycling science: Iron and aluminium (Oxy)(hydr)oxides

Separation, analysis and recycling technologies are of high interest for our modern societies, where colloidal iron and aluminium (hydr)oxides have important applications. However, there are significant gaps in the fundamental understanding of how these phases form in real systems. Classical nucleation theory cannot account for many experimental observations, and there is a dichotomy between the chemistry of hydrolysing/condensating systems and the physical notion of supersaturation. Reviewing parts of the established and recent literature, we demonstrate that concepts of nonclassical nucleation pathways can overcome these issues. This broader, chemistry-based conceptual framework has a high potential for advancing current applications, and developing new strategies towards separation, analysis and recycling applications, which seem to be urgently required for the future.     

Fe(Ⅲ)-PAR络合物光还原分光光度法测定食用菌中微量铁

研究了溶液酸度、光强度、光照时间及显色剂用量对Fe(Ⅲ)-PAR络合物光还原反应的影响。在pH 4.5 HAc-NaAc缓冲溶液中,PAR溶液浓度为1.11×10-3mol/L,250 W荧光高压汞灯照射40 min,Fe(Ⅲ)-PAR络合物光还原反应可趋于完全,据此建立光还原代替化学还原测定微量铁的新方法,该方法用于食用菌中微量铁的测定。     

火焰原子吸收光谱法测定巨大口蘑子实体中的铁、锌和锰

采用火焰原子吸收光谱法测定了巨大口蘑子实体中的微量元素铁、锌和锰的含量,方法简单,精密度和灵敏度高,相对标准偏差为0.378%-0.842%,回收率95.83%-99.45%.     

圆偏振飞秒激光脉冲与低压氙气体靶相互作用软X射线辐射实验研究

利用平场光栅谱仪,分别在2和3 kPa的低气压下,测量了脉宽35 fs的圆偏振超强超短激光脉冲与5 mm长氙气体靶相互作用产生的波长在5～60 nm范围内的离子谱线。2 kPa时最强的跃迁为XeⅧ：4d105s(2S_1/2)—4d95s5p(2P_3/2)的17.085 6 nm线,3 kPa时最强的跃迁为11.343 nm的XeⅦ 4d105s2(1S0)—4d95s25f(3P₁)跃迁。两种气压下,Xe均被电离到XeⅦ,XeⅧ,XeⅨ态。     

Fe原子活化乙烷的微观反应机理

本文采用密度泛函理论B3LYP方法在6-311 G(d,p)基组水平上研究了Fe原子催化乙烷反应的微观反应机理,优化了反应过程中各反应物、中间体、过渡态和产物的构型,并在同一水平上计算了反应中各驻点的振动频率,运用自然键轨道理论(NBO)方法分析了各物质的成键情况和轨道间相互作用。Fe原子对乙烷的活化过程可分为C-C键活化及C-H键活化,分别释放出CH4和H2。     

Span/Tween混合表面活性剂微乳液制备纳米铁及脱硝研究

研究了以Span 80和Tween 60为混合表面活性剂的微乳液的形成。以电导率及目测法为表征手段,利用正交试验,分析了多因素对W/O型微乳液最大增容水量的影响,探明了该乳液形成的适宜条件。     

Iron(0) and ruthenium(0) complexes with tridentate phosphonite ligands and their potential for ketene formation from methyl iodide, CO and a base

An efficient route to the novel tridentate phosphine ligands RP[CH₂CH₂CH₂P(OR′)₂]₂ (I: R = Ph; R′ = i-Pr; II: R = Cy; R′ = i-Pr; III: R = Ph; R′ = Me and IV: R = Cy; R′ = Me) has been developed. The corresponding ruthenium and iron dicarbonyl complexes M(triphos)(CO)₂ (1: M = Ru; triphos = I; 2: M = Ru; triphos = II; 3: M = Ru; triphos = III; 4: M = Ru; triphos = IV; 5: M = Fe; triphos = I; 6: M = Fe; triphos = II; 7: M = Fe; triphos = III and 8: M = Fe; triphos = IV) have been prepared and fully characterized. The structures of 1, 3 and 5 have been established by X-ray diffraction studies. The oxidative addition of MeI to 1-8 produces a mixture of the corresponding isomeric octahedral cationic complexes mer,trans-(13a-20a) and mer,cis-[M(Me)(triphos)(CO)₂]I (13b-20b) (M = Ru, Fe; triphos = I-IV). The structures of 13a and 20a (as the tetraphenylborate salt (21)) have been verified by X-ray diffraction studies. The oxidative addition of other alkyl iodides (EtI, i-PrI and n-PrI) to 1-8 did not afford the corresponding alkyl metal complexes and rather the cationic octahedral iodo complexes mer,cis-[M(I)(triphos)(CO)₂]I (22-29) (M = Ru, Fe; triphos = I-IV) were produced. Complexes 22-29 could also be obtained by the addition of a stoichiometric amount of I₂ to 1-8. The structure of 22 has been verified by an X-ray diffraction study. Reaction of 13a/b-20a/b with CO afforded the acetyl complexes mer,trans-[M(COMe)(triphos)(CO)₂]I, 30-37, respectively (M = Ru, Fe; triphos = I-IV). The ruthenium acetyl complexes 30-33 reacted slowly with 2-tert-butylimino-2-diethylamino-1,3-dimethylperhydro-1,3,2-diazaphosphorine (BEMP) even in boiling acetonitrile. Under the same conditions, the deprotonation reactions of the iron acetyl complexes 34-37 were completed within 24-40 h to afford the corresponding zero valent complexes 5-8. It was not possible to observe the intermediate ketene complexes. Tracing of the released ketene was attempted by deprotonation studies on the labelled species mer,trans-[Fe(COCD₃)(triphos)(CO)₂]I (38) and mer,trans-[Fe(¹³COMe)(triphos)(CO)₂]I (39).     

茶汤及河水中铁的形态分析

本文采用阳离子交换、活性炭分离－光度法研究了铁的形态分离及测定条件，建立了铁的形态分析方法。应用此法测定了茶汤及河水中铁的总量、悬浮态、溶解态、无机态、有机态、Ｆｅ（Ⅲ）和Ｆｅ（Ⅱ）等形态，结果令人满意。