Thermal decomposition study of the coordination compound [Fe(urea)6](NO3)3

The thermochemical behavior of the coordination compound [Fe(urea)₆](NO₃)₃ was studied by simultaneous CG–TG–DTG–DTA and mass spectrometry methods non-isothermal conditions. The compound decomposes at 200 °C into a mixture of spinel-type oxides and hematite. The nature and particle size of the final decomposition products are strongly associated with the conditions during the thermal treatments, in particular the heating rate and the calcination temperature. A certain fraction of the products are formed as nanometric particles; they show superparamagnetic behavior at room temperature. The comparably low temperature of the calcination treatments of this compound is a promising perspective to attain small sized magnetic powders.     

分光光度计测铁矿石中钛的测量不确定度评定

紫外-可见分光光度计在化学分析中应用较为广泛。对于借助其进行化学分析测量不确定度的评定，目前较多见于溶液测定。实际应用中，测试样品多为固体，涉及到称样、溶解、稀释、定容等步骤。此文试从随机效应和系统效应的角度考虑，对紫外-可见分光光度计应用ISO4691：1985铁矿石中钛含量的测定——二安替比林甲烷分光光度法对铁矿石中钛的测量过程中的不确定度来源进行了较为全面的分析，并最终给出评定结果。     

Correction of iron interface in the spectrophotometric flow injection catalytic determination of molybdenum in plants

Iron interference in the spectrophotometric catalytic determination of molybdenum based on the iodide-hydrogen peroxide reaction can be corrected by using sulphosalicylic acid as masking and color-forming reagent. The catalytic influence of iron ions is circumvented to the extent of about 90% and correction of any remaining iron ions is possible by monitoring the colored iron(III)-salicylate complex at 490 nm. In this way, iron is also determined. With the proposed system, molybdenum can be determined in plant and food digests within the 0–100 μg Mo 1⁻¹ range in the presence of up to 25 mg Fe 1⁻¹, at a sampling rate of about 50 determinations h⁻¹. The relative standard deviation of 10 consecutive measurements was estimated as < 2%. Results for samples were comparable with those obtained by graphite furnace atomic absorption spectrometry. In addition, recoveries within the range 94–100% were calculated.     

Fe(II) and Co(II) pyridinebisimine complexes bearing different substituents on ortho- and para-position of imines: synthesis, characterization and behavior of ethylene polymerization

A series of 2,6-bis(imino)pyridyl iron(II) and cobalt(II) complexes [2,6-(ArNCMe)₂C₅H₃N]MCl₂ (Ar = 2,6-i-Pr₂C₆H₃, M = Fe: 3a, M = Co: 4a; Ar = 2,4,6-i-Pr₃C₆H₂, M = Fe: 3b, M = Co: 4b; Ar = 2,6-i-Pr₂-4-BrC₆H₂, M = Fe: 3c, M = Co: 4c; Ar = 2,4-i-Pr₂-6-BrC₆H₂, M = Fe: 3d, M = Co: 4d) has been synthesized, characterized, and investigated as precatalysts for the polymerization of ethylene in the presence of modified methylaluminoxane (MMAO). The substituents of pyridinebisimine ligands and their positions located significantly influence catalyst activity and polymer property. It is found that the catalytic activities of the iron complexes/MMAO systems are mainly dominated by electronical effect, while those of the cobalt complexes/MMAO systems are primarily controlled by hindering effect.     

Allylic Peroxidations with Bis(2‐pyridylimino)isoindolato‐Cobalt and ‐Iron Complexes

Several novel substituted bis(2‐pyridylimino)isoindolato (BPI) cobalt(II) and iron(II) complexes [M(BPI)(OAc)(H₂O)] (M = Co: 1 ‐ 6, Fe: 7) have been synthesized by reaction of bis(2‐pyridylimino)isoindole derivatives with the corresponding metal(II) acetates. Reaction of 1‐6 with 1.5 ‐ 2 molar equivalents of t‐BuOOH gave the corresponding alkylperoxocobalt(III) complexes [Co(BPI)(OAc)(OOtBu)] (10 ‐ 15). Using an aqueous solution of t‐BuOOH (70 %), cyclohexene was selectively catalytically oxidized to the dialkylperoxide cyclohex‐2‐ene‐1‐t‐butylperoxide.     

The Electrochemistry of Tetraphenyl Porphyrin Iron(III) Within Immobilized Droplets Supported on Platinum Electrodes

For the first time, the voltammetry of an ensemble of immobilized benzonitrile microdroplets containing 5,10,15,20‐tetraphenyl‐21H,23H‐porphine iron (III) chloride, TPPFeCl immobilized at platinum electrodes immersed in various aqueous electrolytes has been explored. The reduction of TPPFeCl was observed with the voltammetric response seen to be highly dependent on the nature of ions in the surrounding aqueous phase. Unlike voltammetry in purely homogeneous solution the nature of the aqueous electrolyte can influence the voltammetry in the droplet phase. The electrochemical reduction of TPPFeCl contained within tetrabutylammonium chloride (TBACl) supported benzonitrile (PhCN) microdroplets immersed into an aqueous solution of TBACl was first studied. During TPPFeCl reduction the resulting [TPPFeCl]^? species is stabilized due to the excess of chloride anions inside the oil droplet. Voltammograms of homogeneous solutions of PhCN supported with TBACl show similar chemically reversible process which is also attributed to the stable [TPPFeCl]^? species. This anion stabilization was not observed when the oil droplets were supported with tetrabutylammonium perchlorate (TBAP) or when the PhCN solution bathing the microdroplet ensemble was supported with TBAP resulting in a chemically irreversible process. The voltammetry of unsupported droplets immobilized on a platinum electrode immersed in different aqueous electrolytes was also explored and the fate of the [TPPFeCl]^? species formed considered during the reduction sweep. Similarities and difference to voltammetry in purely homogeneous media are noted and the use of droplet voltammetry provides complimentary information.     

Preparation and Properties of Nickel and Iron Oxides obtained by Calcination of Layered Double Hydroxides

A constant pH precipitation method has been applied to obtain solids with Ni/Fe molar ratios of 2/1, 3/2, 1/1, 2/3, and 1/2. In all cases, a phase with the hydrotalcite‐like structure is obtained, containing Ni^II and Fe^III in the brucite‐like layers and carbonate in the interlayer, and, for samples with a Ni/Fe molar ratio lower than 2/1, amorphous hydrated iron oxides, undetected by X‐ray diffraction, are also formed. The solids have been characterized by element chemical analysis, powder X‐ray diffraction, differential thermal analysis, thermogravimetric and differential thermogravimetric analysis, FT‐IR spectroscopy, temperature‐programmed reduction and assessment of specific surface area by nitrogen adsorption at ?196 °C. In all cases reduction leads to zero‐valent state for the metals, reduced nickel particles probably favouring reduction of Fe^III species; the specific surface area increases with the iron content, probably due to the amorphous nature of the hydrated iron oxides formed. Calcination at 1200 °C in air leads to well crystallized solids, formed by NiFe₂O₄ spinel and, additionally, rocksalt‐type NiO for Ni/Fe ratios larger than 1/2. In this way, solids with tailored compositions of these two phases can be prepared.     

Kinetic-catalytic determination of traces of iron by the oxidative coupling reaction of 3-methyl-2-benzothiazolinone hydrazone with N,N-dimethylaniline

A new kinetic-catalytic method by the initial rate procedure for the determination of nanogram level of iron(III) is developed, which is based on its catalytic effect on the oxidative coupling of 3-methyl-2-benzothiazolinone hydrazone (MBTH) with N,N-dimethylaniline (DMA) to form an indamine dye (λ_max=590 nm) in the presence of hydrogen peroxide. Iron(II) is also determined, being oxidized to iron(III) by hydrogen peroxide. Calibration graphs obtained by the initial rate method are linear in the range 1–1000 ng ml⁻¹ Fe and as low as 10⁻⁸ M Fe(II, III) can easily be determined. The relative standard deviations are 6.6, 2.5 and 1.5% for ten determinations of 1, 20 and 60 ng ml⁻¹ of Fe(III), respectively. The method is applicable to the determination of iron in natural waters without preconcentration and separation.     

Interaction between peroxide ion and phenol group which are coordinated to the same iron(III) ion

We have prepared several new iron(III) complexes with ligands which contain a phenol group; these are tetradentate [(X-phpy)H, X and H(phpy) represent the substituents on the phenol ring and N,N-bis(2-pyridylmethyl)-N-(2-hydroxybenzyl)amine, respectively] and pentadentate ligands [(R-enph-X)H; R=ethyl(Et) or methyl(Me) derivative and H(Me-enph) denotes N,N-bis(2-pyridylmethyl)-N″-methyl-N″-(2″-hydroxyl-benzylamine)ethylenediamine] and have determined the crystal structures of Fe(phpy)Cl₂, Fe(5-NO₂-phpy)Cl₂, and Fe(Me-enph)ClPF₆, which are of a mononuclear six-coordinate iron(III) complex with coordination of one or two chloride ion(s). These compounds are highly colored (dark violet) due to the coordination of phenol group to an iron(III) atom. When hydrogen peroxide was added to the solution of the iron(III) complex, a color change occurs with bleaching of the violet color, indicating that oxidative degradation of the phenol moiety occurred in the ligand system. The bleaching of the violet color was also observed by the addition of t-butylhydroperoxide. The rate of the disappearance of the violet color is highly dependent on the substituent on the phenol ring; introduction of an electron-withdrawing group in the phenol ring decreases the rate of bleaching, suggesting that disappearance of the violet band should be due to a chemical reaction between the phenol group and a peroxide adduct of the iron(III) species with an η¹-coordination mode and that in this reaction the peroxide adduct acts as an electrophile towards phenol ring. The intramolecular interaction between the phenol moiety and an iron(III)-peroxide adduct may induce activation of the peroxide ion, and this was supported by several facts that the solution containing an iron(III) complex and hydrogen peroxide exhibits high activities for degradation of nucleosides and albumin.