Impedance study of Ni–Co electro-deposition on Fe powder particles in fluidised bed systems

The electrochemical impedance method was applied during the electrochemical deposition of a binary Ni–Co coating on iron powder in a fluidised bed electrode system. The influence of the suspension density on the charge transfer in the course of the electro-deposition process was studied. At a potential of −900 mV (vs. Ag/AgCl/3 M KCl), when the binary Ni–Co layer was formed, the impedance data were characterised by two semicircles with the semicircle at high frequencies being larger in magnitude. A contribution of the diffusion process to the overall current was observed. The optimal suspension density for the charge transfer in the bed was 10×10⁻³–15×10⁻³ (i.e., 4–6 g of iron powder in 50 ml of electrolyte). The most probable mechanism of the charge transfer for the studied concentrations of powder particles is the convective mechanism. The iron particles dispersed in the electrolyte were considered to act as either a depolariser or an additional working electrode depending on the applied electrode potential and on the suspension density.     

Synthesis and characterization of monodisperse magnetic composite particles for magnetorheological fluid materials

Monodisperse magnetic composite particles (MCP) were prepared and characterized for a study of magnetic field-responsive fluids. Magnetic composite particles used are iron oxide-coated polymer composite particles, which were synthesized through in situ coating of iron oxide onto pre-existing polymer particles by the reduction of ferrous fluids. For a uniform and bulk coating of iron oxide, the porous structure was introduced into the substrate polymer particles through a two-step seeded polymerization method. Moreover, surface cyano-functionality was born from acrylonitrile unit of substrate polymer and it played an important role in obtaining successful uniform coating. The structure of the composite particle was analyzed by using a thermo gravimetric analysis (TGA) and a X-ray diffraction (XRD) analysis. The magnetization property of the particle was also observed. Then, the rheological properties of monodisperse magnetorheological (MR) suspensions of magnetic composite particles were examined under a magnetic field using a parallel-plate type commercial rheometer. From the rheological measurements, it was found that MR properties of the magnetic composite suspensions are dependent on the iron oxide content and the fluid composition.     

A downsized flow set up based on multicommutation for the sequential photometric determination of iron(II)/iron(III) and nitrite/nitrate in surface water

In this work, a downsized flow set up designed based on multicommutation concept for photometric determination of iron(II)/iron(III) and nitrite/nitrate is surface water is described. The flow system network comprised a set of three-way solenoid valves, reaction coil and a double-channel flow cell, which were nested in order to obtain a compact and small-size instrument. To accomplish the downsizing requirement light source (LED) and radiation detection (phototransistor) were coupled to the flow cell. In order to demonstrated the effectiveness of the system, the photometer methods based on Griess reaction and 1-10-phenantroline for nitrite and iron(II) determination, respectively, were selected. Under computer control the set up provided facilities to handle four reagent solutions employing a single pumping channel, thus permitting also the determination of nitrate and iron(III) after its reduction to nitrite and to iron(II), respectively. The overall system performance was demonstrated working several days running standard solution, no significant variation of base line, linear response range and slop (less than 1%) were observed. The usefulness of the downsized system was ascertained by analyzing a set of surface water. Aiming to access the accuracy sample were also analyzed employing reference procedures and no significant difference at 95% confidence level were observed for the four analytes. Other profitable features such as analytical throughput of 40 determination per hour; relative standard deviation of 1%; linear response range between 50 and 300 μg l⁻¹ for nitrite and nitrate, 0.5-6.0 mg l⁻¹ iron(II) and iron(III); low reagent consumption 75 μg for nitrate/nitrite and 0.6 mg for iron(II)/iron(III) per determination; and 2.4 ml waste generation per determination were also achieved.     

乙醇对合成醇用Cu-Co-Fe催化剂的修饰效应

乙醇对合成醇用Ｃｕ┐Ｃｏ┐Ｆｅ催化剂的修饰效应徐杰王向宇杜宝石（郑州大学化学系，郑州４５００５２）辛勤李灿（中国科学院大连化学物理研究所，大连１１６０２３）关键词铜，钴，铁，合成醇，乙醇，修饰作用分类号Ｏ６４３／Ｏ６４７自７０年代以来，已对多种ＣＯ加...     

Pd（OAc）2／FePc催化环己烯氧化合成环己酮的研究

考察了几种Ｆｅ－大环配合物与Ｐｄ（ＯＡｃ）２组成的双组分催化体系，在乙腈酸性水溶液中环己烯经合成环己酮的催化活性，实验结果表明，其中以酞菁失（ＦｅＰｃ）与Ｐｄ（ＯＡｃ）２组成的催化体系活性最高，而ＦｅＴＰＰＣｌ与Ｐｄ（ＯＡｃ）２催化体系，虽然催化活性较高，但催化剂的稳定性较低，各种因素对Ｐｄ（ＯＡｃ）２／ＦｅＰｃ催化活催化影响的研究结果指出，在无水和酸存在的非水溶液中，Ｐｄ（ＯＡｃ）２／ＦｅＰｃ对     

ICP—AES卡尔曼滤波同时测定铁基体中26种痕量元素

本文利用电感耦合等离子体原子发射光谱（ＩＣＰ－ＡＥＳ）多色仪的扫描功能，用Ｃ语言编制了Ｋａｌｍａｎ滤波程度软件包，用该软件包对铁基体中２６种痕量元素进行了回收率试验，并对标准碳素钢样中１３种痕量元素进行了测定，结果表明Ｋａｌｍａｎ滤波完全适用于复杂谱线基体中的多种元素同时分析。     

A fluorescent chemical sensor for Fe based on blocking of intramolecular proton transfer of a quinazolinone derivative

In this paper, 2-(2′-hydroxy-phenyl)-4(3H)-quinazolinone (HPQ), a typical compound that exhibits excited state intramolecular proton transfer (ESIPT) reaction and possesses good photophysical properties, is synthesized and used as fluoroionophore for Fe³⁺ sensitive optochemical sensor. The decrease of fluorescence intensity of HPQ membrane upon the addition of Fe³⁺ was attributed to the blocking of ESIPT reactions of HPQ and quenching its fluorescence. The effect of the composition of the sensing membrane was studied, and experimental conditions were optimized. The sensor shows a linear response toward Fe³⁺ in the concentration range of 7.1 × 10⁻⁷ M to 1.4 × 10⁻⁴ M with a limit of detection of 8.0 × 10⁻⁸ M, and a working pH range from 2.5 to 4.5. It shows excellent selectivity for Fe³⁺ over a large number of cations such as alkali, alkaline earth and transitional metal ions. The proposed sensor is applied to the determination of the content of iron ions in pharmaceutical preparations samples with satisfactory results.     

固氮酶及合成氨Fe催化剂中N2的络合位

用乙烯为探针研究了固氮酶中Ｎ２的键合位，结果表明，乙烯不能与Ｎ２在固氮酶体系中相竞争，提出Ｎ２在固氮酶中键合位很可能是蛋白键合ＦｅＭｏ－ｃｏ笼内６Ｆｅ位的μρ（η＾２，ε４）ｔ ３Ｆｅ＋１Ｍｏ位的μ４（η＾３，ε）方式，而不是笼口２Ｆｅ位的μ２（η＾２）方式，在合成氨Ｆｅ催化剂中Ｎ２的络事方式可能是μ６（η＾３，ε３ ）。     

Aggregation of iron colloids in estuaries: a heterogeneous kinetics study using continuous mixing of river and sea waters

The kinetics of iron colloid aggregation in estuaries have been simulated with a model estuary in which seawater is continuously pumped into a reservoir initially containing river water. Profiles of colloidal Fe concentration versus salinity produced in this apparatus closely resembled field data for actual estuaries. Synthetic Fe colloids prepared by peptising Fe(OH)₃ with humic acid and phosphate showed very similar kinetic behaviour. Aggregation rate was found to be almost independent of velocity shear rate, implying that most aggregations are induced by brownian interparticle collisions. A heterogeneous kinetic model is proposed to explain the kinetic behaviour of Fe colloids during seawater-induced aggregation. This model describes kinetic behaviour in terms of a log-normal distribution of rate constants characterised by a mean value k and a standard deviation γ. Experiments showed that k is linearly related to the rate constant for salinity increase during mixing. This coupling of salinity changes and aggregation rate leads to Fe-salinity profiles that are nearly independent of the rate of salinity change, but which are dependent on γ.     

Development of the continuously variable volume reactor for flow injection analysis: Part 1. Design, capabilities and testing

A new apparatus for mixing sample and reagent in flow injection analysis (FIA) is described. The continuously variable volume reactor (CVVR) replaces the conventional mixing coil in a flow injection (FI) manifold to provide mixing and dilution. A linear actuator motor allows control of the chamber volume via LabVIEW software. The chamber volume can be incremented in steps of 1 μl over the range 68-1704 μl. In addition, the chamber has an integral variable-speed stirring unit that is also under computer control. Experiments were performed to evaluate the dispersion characteristics of this new device, evaluate the volume reproducibility, and understand the mixing characteristics. Use of the chamber is shown in the determination of iron(II) in pond water, and in NIST SRM 1643d with excellent results and a detection limit of 3.7 μg/l iron(II). Advantages of the CVVR and future research activities using the device are discussed.