Structural characterization of nanopatterned surfaces

In this work, chemically and topographically nanopatterned surfaces were produced by a top-down processing approach for biosensing devices. The nanopatterning was the result of the combination of plasma polymerisation (pp) of biofunctional materials and colloidal lithography techniques. The morphological and chemical properties induced by the plasma deposition-etching treatment were characterised by optical method combining ellipsometry and Fourier Transform Infrared spectroscopy studies. This method supported by atomic force microscopy measurements, allowed the full optical characterization of each step of the top-down process. The optical characterization of the end-up nanopatterned samples demonstrated that the chosen process is able to produce well-defined nanostructured surfaces with controlled chemical and morphological properties.     

Structure–electrical property study of anisotropic polyaniline films

The relationships of the structure and electrical properties of anisotropic HCl‐doped polyaniline (PANI) films cast from N,N′‐dimethylpropylene urea (DMPU) solutions and stretched to different draw ratios were studied. The anisotropic structure of the stretched PANI films was examined by X‐ray diffraction, near‐infrared wave‐guide coupling, and polarized infrared measurements. The PANI emeraldine base (EB) films cast from DMPU solutions had a single‐phase noncrystalline structure, and stretching of the films did not cause crystallization to occur. The transition moment angles of two weakly absorbing infrared bands were determined, and the Hermans' orientation functions for the PANI EB films were calculated. The PANI films were then doped with HCl, and the electrical properties were determined by impedance spectroscopy. With a specially designed test fixture, the in‐plane and through‐plane impedance was obtained. The conductivity along the stretch direction increased with orientation. The in‐plane conductivity was significantly higher than the through‐plane conductivity. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 823–841, 2003     

Mössbauer study on LiFePO4 cathode material for lithium ion batteries

Crystalline LiFePO₄ has been synthesized using solid-state, spray pyrolysis, and wet chemical methods. The crystal parameters were obtained from Rietveld’s refinement methods of the X-ray diffraction patterns. A detailed investigation of the Fe valency carried out using Mössbauer spectroscopy at room temperature indicates that Fe is predominantly present in its bivalent state.     

TERAHERTZ QUALITY CONTROL OF POLYMERIC PRODUCTS

We report on experiments that evaluate the potential of terahertz (THz) time-domain spectroscopy (TDS) for quality control of polymeric compounds. We investigate specimens out of a polyethylene compound with silver-coated titanium dioxide nanospheres and a glass-fiber reinforced epoxy composite. We further examine an industrial polymer product produced by injection molding. Our data demonstrates that THz imaging is a powerful tool for contactless quality control in the polymer industry.     

Effect of Ga doping on magneto-transport properties in colossal magnetoresistive La0.7Ca0.3Mn1−xGaxO3 (0<x<0.1)

Samples of La_0.7Ca_0.3Mn_1−xGa_xO₃ with x=0, 0.025, 0.05 and 0.10 were prepared by standard solid-state reaction. They were first characterized chemically, including the microstructure. The magnetic properties and various transport properties, i.e. the electrical resistivity, magnetoresistivity (for a field below 8 T), thermoelectric power and thermal conductivity measured each time on the same sample, are reported. The markedly different behaviour of the x=0.1 sample from those with a smaller Ga content, is discussed. The dilution of the Mn³⁺/Mn⁴⁺ interactions with Ga doping considerably reduces the ferromagnetic double exchange interaction within the manganese lattice leading to a decrease of the Curie temperature. The polaron binding energy varies from 224 to 243 meV with increased Ga doping.     

Mechanosynthesis of YIG and GdIG: A Structural and Mössbauer Study

We have investigated the mechanosynthesis of gadolinium and yttrium iron garnets by high-energy ball-milling of α-Fe₂O₃ and Gd₂O₃ or α-Fe₂O₃ and Y₂O₃, respectively, followed by short thermal annealings conducted at moderate temperatures. The samples were characterized by X-ray diffraction and Mössbauer spectroscopy, in order to determine the influence of the milling time and annealing conditions on the final products. For as-milled samples of each rare-earth system, the results revealed the formation of perovskite phases, in relative amounts that depend on the milling time. The formation of garnet phases was observed in as-annealed samples treated at 1000°C for 2 h or 1100°C for 3 h, i.e., at very modest annealing requirements when compared with ordinary solid-state-reaction processes performed without previous high-energy milling. Also, the occurrence was verified of a milling time for which the relative amount of garnet phases formed by annealing was maximized. This time depends on the rare-earth composing the garnet phase and on the annealing temperature.     

Structural and spectroscopic studies of silylated cyclo- and bicyclosilanes

A number of cyclo-and bicyclosilanes have been prepared and structurally characterized by X-ray crystallography and Raman spectroscopy. 1,1,4,4- and 1,1,3,3-tetrakis(trimethylsilyl)octamethylcyclohexasilanes were found to exhibit unusual twist- and twisted boat-conformations. The UV absorption properties of all compounds were studied and found to show absorption maxima red shifted compared to the parent compound dodecamethylcyclohexasilane. Dedicated to Prof. Mitsuo Kira on the occasion of his reception of the Wacker Silicon Award 2005 and in recongnition of his numerous outstanding achievements in organosilicon chemistry.     

Synthesis of dihalocarbene derivatives of estafiatin guaianolide

Adducts of dihalocarbenes generated from chloroform and bromoform were prepared by reaction with estafiatin guaianolide. Their structures were established by XSA. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 5, pp. 453–455, September–October, 2007.     

Mössbauer study of nanodimensional nickel ferrite – mechanochemical synthesis and catalytic properties

Iron–nickel spinel oxide NiFe₂O₄ nanoparticles have been prepared by the combination of chemical precipitation and subsequent mechanical milling. For comparison, their analogue obtained by thermal synthesis is also studied. Phase composition and structural properties of iron–nickel oxides are investigated by X-ray diffraction and Mössbauer spectroscopy. Their catalytic behavior in methanol decomposition to CO and methane is tested. An influence of the preparation method on the reduction and catalytic properties of iron–nickel samples is established.     

Magnetic order in LaEuSrCuO studied [2pt] by Fe Mössbauer spectroscopy

⁵⁷Fe M?ssbauer effect studies of La_1.65Eu_0.20Sr_0.15CuO₄ doped with 0.5 at% ⁵⁷Fe performed in the temperature region 300 K > T > 4.2 K give an onset temperature for magnetic ordering of K. This temperature practically is the same as that found in Nd doped La_2-xSr_xCuO₄. It indicates that the magnetic ordering temperature in the LTT phase of rare earth (RE) doped La_2-xSr_xCuO₄ is independent of the RE moment. The direction of the ⁵⁷Fe magnetic moment in the magnetically ordered state is within the CuO₂ plane, while it has been found to be parallel to the c-axis in Nd doped La_2-xSr_xCuO₄. Received: 23 June 1998 / Accepted: 14 July 1998