四象限探测器用作激光准直的特性分析

以四象限光电探测器用作激光准直为例,对其探测原理、光电转换特性、影响探测精度的因素进行了理论分析。用数值模拟、实验验证了分析结果,并对影响探测精度的因素进行了深入的探讨,从而为四象限探测器用作激光准直提供了有力的理论依据。     

光网络中的关键器件

光器件是光网中的基础单元之一。介绍了光网络中一些关键器件的重要特性及进展情况,讨论了光器件发展趋势。     

Design studies on the 4π γ-ray calorimeter for the ETF experiment at HIRFL-CSR

A high detection efficiency calorimeter which is used to detect γ-rays with energies from 1 MeV up to 10 MeV as well as light charged particles has been proposed. Design of the geometry, results of the crystal tests and Monte Carlo simulations are presented in this paper. The simulation results confirm that the calorimeter can obtain high detection efficiency and good energy resolution with the current designed geometry. And the calorimeter is competent for the future External Target Facility (ETF) experiments.     

气源MBE外延自组装GeSi量子点光致荧光研究

利用气源分子束外延设备（MBE）制作了GeSi自组装量子点样品。利用原子力显微镜（AFM）和光致荧光（PL）光谱研究了量子点的形貌和光学性质。气源MBE在较低温度下生长的量子点材料具有较高的量子点覆盖度。200K以下载流子以局域激子形式束缚在量子点中,激子束缚能约为17meV。升温至200K,载流子的输运过程发生变化。对量子点PL积分强度与温度关系曲线进行拟合得到量子点中空穴跃迁至浸润层的热激活能为129meV。     

红外探测器成像实验研究

红外探测器广泛应用于多光谱成像系统中,文章提出并建立了一种红外线阵时间延迟积分探测器的成像实验系统,阐述了成像系统的工作原理,对影响成像质量的两个主要因素电子稳像与自动对焦进行了深入分析。利用高精度直流测速机确定了转台转速与探测器的行转移频率,采用卡尔曼滤波算法滤除了测速机带来的噪声,提高了速度匹配精度。在分析比较红外相机四种检焦方法的基础上采用视频信号幅度法进行检调焦。在国家光学机械产品质量监督检验测试中心实地搭建了成像实验系统,并分别对5.3,6.4和9.2mm宽度靶标成像。实验结果表明,采集到的原始靶标纹理清晰,照相分辨率达到了每毫米11.3对线,达到了实验预期目的。     

Be(d,n)反应中子源能谱测量及应用

 利用中子飞行时间技术和BC501A液体闪烁探测器的粒子分辨特性,测量了0°方向、20 MeV氘束轰击厚金属铍靶反应产生的中子源能谱,测量的中子能谱范围为0.7～25.0 MeV。在60°方向放置芪晶体闪烁探测器,由刻度好的BC501A液体闪烁探测器归一校正后,用于中子源强度监测。利用Be(d, n) 反应中子源,采用单粒子灵敏度标定方法,实验标定了0.75~15.75 MeV能量范围内的薄膜闪烁探测器中子能量响应曲线,实验结果与蒙特卡罗模拟计算结果在8%的不确定度范围内一致。     

合肥光源托歇克效应损失电子的探测

 束流寿命是衡量储存环性能的重要参数,直接影响着光源的正常运行。对于合肥光源（HLS）,托歇克（Touschek）寿命是影响束流寿命的重要因素。为了研究Touschek寿命,需要探测由于Touschek效应所损失的电子。介绍了束流寿命的概念,说明了Touschek效应的原理和机制,利用蒙特卡罗软件EGSnrc模拟计算了丢失电子与真空壁的相互作用,通过塑料闪烁体探测器和光电倍增管获得了由于Touschek效应丢失的电子所产生的信号,然后将信号经过放大甄别和符合处理后,用计数器测量了计数率。结果表明：由于Touschek效应而成对丢失的电子的确存在,且电子损失率随流强的降低而减小。这为下一步储存环的能量标定工作做好了前期准备。     

质子衰变实验进展

按照粒子物理标准模型理论,重子数是绝对守恒的.而大统一理论(GUTs)明确地否定了重子数的对称性,预言质子会衰变成更轻的次粒子.文章论述了质子衰变的物理概念、基本探测条件和主要实验现状,并在探测方法的探讨和探测技术的改进方面融入了一些想法.目前一般认为质子的寿命为τp>1032年左右.质子衰变的探测,对于新理论模型的验证、宇宙学和粒子物理学的发展具有重要意义.     

Preparation of a silicon micro-strip nuclear radiation detector by a two-step annealing process

The annealing process for boron implantation is a crucial step during large size nuclear radiation detector fabrication. It can reduce the lattice defects and the projection straggling. A two-step annealing process for boron implantation was developed instead of a one-step annealing process, and the reverse body resistance of a silicon micro-strip detector was significantly increased, which means that the performance of the detector was improved.     

Study of radiation background at the north crossing point of the BEPCⅡ in collision mode

Understanding the radiation background at the north crossing point (NCP) in the tunnel of BEPCII is crucial for the performance safety of the High Purity Germanium (HPGe) detector, and in turn of great significance for long-term stable running of the energy measurement system. Therefore, as the first step, a NaI(Tl) detector is constructed to continuously measure the radiation level of photons as background for future experiments. Furthermore, gamma and neutron dosimeters are utilized to explore the radiation distribution in the vicinity of the NCP where the HPGe detector will be located. Synthesizing all obtained information, the shielding for neutron irradiation is studied based on model-dependent theoretical analysis.