Sample preparation procedure for the determination of sulphur and trace metals in oil products by the ICP with a minitorch using emulsions

A quick sample preparation method was used for the determination of sulphur and trace metals in oil and oily products by the ICP with a minitorch. Stable aqueous emulsions of oils and oil products were made by using two kinds of emulsifiers (one with low sulphur content, the other sulfonated). Aqueous standard solutions can be used for the preparation of calibration solutions. The contents of S, Al, Cr, Cu, Fe, Mg, Ni and Pb in aqueous emulsions were determined and the results were in good agreement with the composition of oil standard solutions used for control analysis procedure.     

Pyrolysis chemical ionization mass spectrometry of cellulose ethers

Pyrolysis ammonia chemical ionization (PyCI) mass spectrometry was performed on hy-droxyethyl-, hydroxypropyl-,methyl-, hydroxypropylmethyl-, and ethylhydroxyethyl cel-luloses. The mass peaks in the PyCI mass spectra of these cellulose ethers could be assigned to the ions of pyrolytic dissociation products which form via the [2 + 2 + 2] cycloreversion and the E_i elimination pyrolysis pathway. Structural information about the residual amount of nonderivatized cellulose, the relative chain length distributions of the substituents in hydroxyalkyl celluloses, and the end-capping of hydroxyalkyl substituents by alkyl groups in the mixed cellulose ethers is obtained. Interference of secondary pyrolysis products in the PyCI mass spectra is found to be of minor importance, especially in the lower mass regions. © 1995 John Wiley & Sons, Inc.     

Depth profiling of latex blends of fluorinated and fluorine‐free acrylates with laser‐induced secondary mass spectrometry

We explored phase separation and self‐assembly of perfluoroalkyl segments at the surface of polymer films obtained from latices of semifluorinated acrylate copolymers and the corresponding latex blends of nonfluorinated and semifluorinated polyacrylates. With laser‐induced secondary mass spectrometry the fluorine distribution was measured after annealing above the minimum film‐forming temperature of the polymers up to a depth of several micrometers. Depth profiles of a semifluorinated acrylate homopolymer and latex blends thereof with fluorine‐free alkylacrylates with 25, 50, and 75 mol % semifluorinated acrylate as well as a copolymer comprised of alkyl acrylate and semifluorinated acrylate (50/50 mol %) were investigated. In the case of latex blends containing both semifluorinated polyacrylates and fluorine‐free or low‐fluorine polymers, self‐assembly accounted for enrichment of the perfluoroalkyl segments at the surface. Coatings exhibiting low surface energy and having a substantially reduced total fluorine content were obtained. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 360–367, 2003     

Mössbauer, X-ray diffraction and magnetization studies of Fe–Mn–Al–Nb alloys prepared by high energy ball milling

Fe₆₀Mn₁₀Al₂₀Nb₁₀, (Fe₆₀Mn₁₀Al₃₀)₉₅Nb₅ and (Fe₆₀Mn₁₀Al₃₀)₉₀Nb₁₀ ball milled powdered alloys were investigated using X-ray diffraction, Mössbauer spectrometry, thermomagnetic (TGM) and magnetization measurements. We studied the influence of Nb content and of different milling times on the structural and magnetic properties. Two main features can be concluded: (1) the FeAlMn induces a BCC phase whatever the Nb content is, and (2) as both increasing Nb content and milling time give rise to an highly disordered state in conjunction with a decrease of the ferromagnetic behavior.     

Identification of chlorinated sulfur compounds in pulp mill effluents by GC-MS and GC-AED

Summary Three chlorinated dimethyl sulfones and five chlorinated thiophenes have been identified in the alkaline extraction liquor from a bleach plant by gas chromatography with atomic emission detection (GC-AED) and with mass spectrometry (GC-MS). The information on elemental content obtained by GC-AED enabled a rapid screening of the sulfur compounds and provided important structural information complementary to the mass spectral data. Quantitation was accomplished by GC-AED based on universal calibration.     

X射线荧光光谱法快速测定稀土萃取生产的中控样品

本文介绍了一种新型样品杯，通过使用这种样品杯，实现了大型Ｘ射线荧光光谱仪在稀土萃取生产过程中的现场分析，同时还对基体效应，谱线干扰，背景扣除等进行了研究。实践证明本法准确可靠，简便快速。     

异烟肼及其代谢产物的串联质谱分析

报道了血样中异烟肼的串联质谱快速分析，利用这种分析方法，证实了一男性死者血样中异烟肼及其代谢产物的存在，从而为法庭诉讼提供了可靠的证据。这种方法具有快速性，高灵敏度和高选择性，适合于需要快速分析的场合。     

X—射线荧光分析中薄膜试样的面积和厚度对分析结果的影响

本文就薄膜法制样、用X-射线荧光谱法分析稀土样品时,试样面积和厚度对分析结果产生的影响作了定量研究,提出的有关分析条件和参数用于实际样品分析中,获得了满意的分析结果。     

Simultaneous separation and identification of hashish constituents by coupled liquid chromatography-mass spectrometry (HPLC-MS)

Summary This paper reports the use of liquid chromatography for the separation and determination of the major cannabinoids extracted from hashish samples. The direct coupling to the mass spectrometer enables the selective identification both of neutral and acidic cannabinoids. The developed method does not require any preliminary derivatization and should, therefore, be of interest in forensic analysis for simple and unequivocal determination of hashish constituents.Part of this work was presented at the 2nd Italian-Spanish Joint Meeting of Medicinal Chemistry, 30 August–3 September 1995, Ferrara, Italy.     

碳原子簇的结构与质谱的关联（Ⅱ）

根据出现在质谱中的各种大小的碳原子簇的相对丰度,分析了由激光产生的碳原子簇离子的统计分布,研究了这些统计分布与碳原子簇结构的关联。研究结果表明：相同构型的原子簇的相对丰度可以由同一条对数正态分布曲线来描述,由此能够获得碳原子簇构型的变化情况。质谱中分布曲线的数目对应于具有不同构型或不同结构稳定性的原子簇的数目。如果某些簇离子的谱峰明显地高出分布曲线,它们的结构应特别稳定,其成簇原子数就是所谓的“奇幻数”（ｍａｇｉｃｎｕｍｂｅｒ）,例如在石墨质谱中的Ｃ＿（６０）就属于这种情况。原子簇的统计分布还与它们的生成过程有关,由此可能揭示出原子簇的产生机理。