Track revelation and optical properties of pentaerythritol tetrakis (allyl carbonate) plastic for application as nuclear track detector: effects of gamma radiations

The etching conditions of an indigenously prepared thin film of pentaerythritol tetrakis(allyl carbonate) (PETAC) were standardised for the use as a nuclear track detector. The optimum etching times in 6?N NaOH at 70°C for the appearance of fission and alpha tracks recorded in this detector from a ²⁵²Cf solid source were found to be 30 min and 1.50?h, respectively. The experimentally determined values for the bulk and track-etch rates for this detector in 6?N NaOH at 70°C were found to be 1.7?±?0.1 and 88.4?±?10.7?µm/h, respectively. From these results, the important track etching properties such as the critical angle of etching, the sensitivity and the fission track registration efficiency were calculated and compared with the commercially available detectors. The activation energy value for bulk etching calculated by applying Arrhenius equation to the bulk etch rates of the detector determined at different etching temperatures was found to be 0.86?±?0.02?eV. This compares very well with the value of about 1.0?eV reported for most commonly used track detectors. The effects of gamma irradiation on this new detector in the dose range of 200–1000?kGy have also been studied using bulk etch rate technique. The activation energy values for bulk etching calculated from bulk etch rates measurements at different temperatures were found to decrease with the increase in gamma dose indicating scission of the detector due to gamma irradiation. The optical band gap of this detector was also determined using UV–visible spectrometry and the value was found to be 4.37?±?0.05?eV.     

MoEDAL – a new light on the high-energy frontier

In 2010, the MoEDAL (MOnopole and Exotics Detector at the LHC) experiment at the Large Hadron Collider (LHC) was unanimously approved by European Centre for Nuclear Research’s Research Board to start data taking in 2015. MoEDAL is a pioneering experiment designed to search for highly ionising manifestations of new physics such as magnetic monopoles or massive (pseudo-)stable charged particles. Its groundbreaking physics programme defines a number of scenarios that yield potentially revolutionary insights into such foundational questions as: are there extra dimensions or new symmetries; does magnetic charge exist; what is the nature of dark matter; and, how did the Big Bang develop. MoEDAL’s purpose is to meet such far-reaching challenges at the frontier of the field. The innovative MoEDAL detector employs unconventional methodologies tuned to the prospect of discovery physics. The largely passive MoEDAL detector, deployed at Point 8 on the LHC ring, has a dual nature. First, it acts like a giant camera, comprised of nuclear track detectors – analysed offline by ultra fast scanning microscopes – sensitive only to new physics. Second, it is uniquely able to trap the particle messengers of physics beyond the Standard Model for further study. MoEDAL’s radiation environment is monitored by a state-of-the-art real-time TimePix pixel detector array. A new MoEDAL sub-detector designed to extend MoEDAL reach to mini-charged, minimally ionising particles is under study.     

在电子传输层中添加PVK提高钙钛矿太阳能电池的性能

为了探究PVK对倒置平面异质结钙钛矿太阳能电池电子传输层的影响,向电子传输层PCBM中添加了一种富电子的聚乙烯基咔唑(PVK).采用原子力显微镜、PL光谱对薄膜进行了表征.实验结果表明:少量PVK的添加提高了覆盖在钙钛矿薄膜上PCBM层的平整度.当PVK的添加质量分数为4%时得到最佳器件效率,相比于纯PCBM作为电子传输层的器件,器件效率由(5.11±0.14)% 提升到(9.08±0.46)%.当PVK的添加质量分数大于4%时,粗糙度又趋于变大.PL光谱显示,少量PVK的加入使钙钛矿/电子传输层薄膜的PL强度降低,并使PL峰蓝移.研究表明:向PCBM中掺杂适量PVK能够改善钙钛矿/电子传输层/Al的界面接触,减少漏电流,并能够减少钙钛矿表面陷阱和晶界缺陷,减少电荷复合,从而提高了器件性能.     

Study of radiation background at the north crossing point of the BEPCⅡ in collision mode

Understanding the radiation background at the north crossing point (NCP) in the tunnel of BEPCII is crucial for the performance safety of the High Purity Germanium (HPGe) detector, and in turn of great significance for long-term stable running of the energy measurement system. Therefore, as the first step, a NaI(Tl) detector is constructed to continuously measure the radiation level of photons as background for future experiments. Furthermore, gamma and neutron dosimeters are utilized to explore the radiation distribution in the vicinity of the NCP where the HPGe detector will be located. Synthesizing all obtained information, the shielding for neutron irradiation is studied based on model-dependent theoretical analysis.     

Annealing effect on planar waveguides in LiNbO3 produced by oxygen ion implantation

We reported on planar waveguides in stoichiometric lithium niobate fabricated by 4.5 MeV oxygen ion implantation with a dose of 6 × 10¹⁴ ions/cm² at room temperature. After ion implantation, these samples were annealed at 240 °C, 260 °C, and 300 °C for 30 min. We investigated annealing effect on the guiding modes and near-field images in the waveguides by prism-coupling method and end-face coupling method respectively. We found that for the extraordinary refractive index a positive alternation occurred in the near-surface region while a negative alternation happened at the end of ion track. Moreover, we measured the transmission spectra for the pure sample and implanted samples before and after annealed at different temperatures, and we observed an absorption peak at ∼480 nm (2.6 eV) in all of these SLN samples.     

LIST developments at IGISOL

The ion guide technique was developed in Jyv?skyl? during the early 1980's. In the ion guide the reaction recoil products are stopped and thermalized in high purity helium gas where they remain ionic due to high ionization potential of helium atoms. Different designs of ion guide exist for light-ion induced fusion reactions, for heavy-ion induced fusion and for proton induced fission. Although the IGISOL method is fast and universal it is chemically unselective and in many cases relatively inefficient. In order to address these deficiencies in the technique, a new laser ion source project, FURIOS (Fast Universal Resonant laser Ion Source), commenced in 2004. In addition, resonance ionization spectroscopy has been tested off – line within a sextupole ion beam guide.     

低能量阈高纯锗探测器用于暗物质探测实验研究

一个位于韩国江原道襄阳郡地下实验室的暗物质WIMP探测实验中, 采用了低能量阈高纯锗探测器, 带有碘化铯晶体反符合探测器作为主动屏蔽体. 整个系统设置和能量标定已经完成, 并且已经积累了约155d的本底数据. 还应用外置伽玛源和中子源进行了实验, 以判断本底的来源. 介绍了数据的分析和初步结果, 并给出了实验诱人的前景.     

Effect of C60 ion sputtering on the compositional depth profiling in XPS for Li(Ni,Co,Mn)O2 electrodes

The performance of a Li-ion cell strongly depends on the solid-electrolyte interface (SEI) on electrodes. The depth distribution of composition in SEI is normally determined by means of X-ray Photoelectron Spectroscopy (XPS) via Ar ion sputtering. Recently, a new kind of ion gun using C60 ions as sputtering source was introduced. In this report, a comparison between the effects of these two kinds of ion guns on the quantification of Li(Ni,Co,Mn)O₂ electrodes was made. It was found that the C60 ion gun is more suitable for analyzing the composition and chemical state of Li(Ni,Co,Mn)O₂ electrode since that it causes lower chemical damage in the superficial layer.     

大口径轻型红外扫描镜技术的研究

分析了大口径轻型红外扫描镜国内研制的必要性。讨论了国内的研制方案。研究了关键技术的现状 ,并对未来发展进行了展望。     

Z=18—82原子的同步辐射内壳层光电离积分截面的计算和讨论

此文计算了Ｚ＝１８－８２的原子在北京同步辐射４Ｂ９Ａ束线的白色Ｘ光照射下的光电离积分截面Ｇ值。结果表明，有三个Ｇ值较大的区域，Ｚ＝１８－２０，３９－４７和５９－８２，最大值分别为３．８×１０－６，１．６×１０－５和３．５×１０－５ｐｈｏｔｏｎｓ·ｃｍ２／ｓ。同时，估计了平衡时主要多重电荷态离子数目，分析了用同步辐射和离子阱进行多重电荷态实验的新的候选原子，讨论了有关实验方法和技术。