简易型离子选择电极-流动注射分析仪的研制及卤水中氯、溴和碘的连续测定

本文设计研制了简单实用的流通池,组装了简易型离子选择电极—流动注射分析仪,对体系的分析特点和影响因素进行了考察。此装置性能可靠,能满足简单流注分析的需要,并建立了卤水中Cl~-、Br~-和I~-的连续测定方法。     

Ion mobility–mass spectrometry: a new paradigm for proteomics

Matrix-assisted laser desorption/ionization (MALDI) coupled with ion mobility–mass spectrometry (IM–MS) provides a rapid (μs–ms) means for the two-dimensional (2D) separation of complex biological samples (e.g., peptides, oligonucleotides, glycoconjugates, lipids, etc.), elucidation of solvent-free secondary structural elements (e.g., helices, β-hairpins, random coils, etc.), rapid identification of post-translational modifications (e.g., phosphorylation, glycosylation, etc.) or ligation of small molecules, and simultaneous and comprehensive sequencing information of biopolymers. In IM–MS, protein-identification information is complemented by structural characterization data, which is difficult to obtain using conventional proteomic techniques. New avenues for enhancing the figures of merit (e.g., sensitivity, limits of detection, dynamic range, and analyte selectivity) and optimizing IM–MS experimental parameters are described in the context of deriving new information at the forefront of proteomics research.     

Surface chemical analysis of raw cotton fibres and associated materials

The surface chemical composition of raw unscoured cotton was successfully investigated by the surface analytical techniques X-ray Photoelectron Spectroscopy (XPS) and Time of Flight Secondary Ion Mass Spectrometry (ToF-SIMS). The presence of non-cellulosic material at the fibre surface was established and determined to be a complex mixture of fatty acids, alcohols, alkanes, esters and glycerides. The effect of scouring and bleaching was to reduce the surface concentration of these materials but even after aqueous processing some non-cellulosic material residue was still detected at the fibre surface.     

Synthesis and formulation of vinyl-containing polyacids for improved light-cured glass-ionomer cements

Vinyl-containing poly(acrylic acid-co-itaconic acid) copolymers were synthesized and used to formulate light-curable cements containing reactive glass fillers (Fuji II LC). The conditions for light curing were studied and optimized. Effects of molecular weight (MW), grafting ratio, comonomer, liquid composition, powder/liquid (P/L) ratio, glass powder and aging were evaluated. The results show that the vinyl-containing glass-ionomer cements (GICs) prepared in this study exhibit higher compressive strength (CS, 225.6 MPa), diametral tensile strength (DTS, 28.4 MPa) and much higher flexural strength (FS, 116.4 MPa), as compared to commercial Fuji II LC GIC (186.6 in CS, 19.1 in DTS and 57.1 in FS). The optimal light-exposure time was found to be around 10 min, and concentrations of CQ and DC were 0.5% (by weight) and 1.0%, respectively. Effects of MW, grafting ratio, P/L ratio and content of polymer in the liquid formulation were significant. The highest strengths were found for the optimal formulations where the MW was 15,000 (weight average), grafting ratio 25 mol%, P/L ratio 2.7 and liquid composition 50:20:30. During aging, the cement showed an increase of strength over the first week and then no change for a month. SEM analysis suggests that more integrated microstructures and smaller glass particles can lead to higher FS and higher polymer content in GICs leads to tough fracture surface and plastic deformation.     

Unusual ion pairs and their relationship to acid ionization

Osmotic and activity coefficients, determined from isopiestic measurements, are presented for aqueous solutions of eight tetramethylguanidinium salts. It is proposed that both hydronium and tetramethylguanidinium ions are capable of forming stable ion pairs with many anions by means of bridged hydrogens forming six-membered rings and that these ion pairs are stable in rather dilute aqueous solutions.     

芳香酸淋洗液的单柱阳离子色谱法测定碱金属,铵离子和烷基胺

研究了邻苯二甲酸、苯甲酸和对羟基苯甲酸３种芳香酸分别做淋洗液的单柱阳离子色谱法分离测定Ｌｉ＋、Ｎａ＋、ＮＨ４＋、Ｋ＋、甲胺、乙胺和正丙胺７种物质。３种芳香酸做淋洗液均可将７种物质分离开，且分离结果差异不大。在淋洗液浓度相同的条件下，邻苯二甲酸做淋洗液测定的检出限较低。选择３．０ ｍｍｏｌ／Ｌ邻苯二甲酸做淋洗液测得了上述７种物质的检出限和线性范围，并进行了叶面肥试样分析，７种物质的加标回收率在９６．４％～９８．６％之间。     

Additivity Factors in the Binding of the Diethyltin(IV) Cation by Ligands Containing Amino and Carboxylic Groups at Different Ionic Strengths

Complex formation constants were determined potentiometrically (by a ISE-H⁺, glass electrode) in the systems, M²⁺ – L^z – H⁺ [M²⁺ = (C₂H₅)₂Sn²⁺, L^z = malonate, glycinate and ethylenediamine] at t = 25 ^∘C and 0.1 mol-L⁻¹≤ I/ ≤ 1 mol-L⁻¹ in NaCl_aq (0.1 mol-L⁻¹ ≤ I ≤ 0.75 mol-L⁻¹ for the ethylenediamine system). Thermodynamic values of formation constants, at infinite dilution, are [± 95% confidence interval, ^Tβ_pqr refer to the equilibrium, pM²⁺ + qL^z + rH⁺ = M_pL_qH_r^(2+z+r)]: for malonate, log₁₀ ^Tβ₁₁₀ = (5.47 ± 0.10); for glycinate, log₁₀ ^Tβ₁₁₀ = (9.54 ± 0.08), log₁₀ ^Tβ₁₁₁ = (12.97 ± 0.10); and for ethylenediamine, log₁₀ ^Tβ₁₁₀ = (10.47 ± 0.10), log₁₀ ^Tβ₁₂₀ = (16.17 ± 0.12) and log₁₀ ^Tβ₁₁₁ = (15.46 ± 0.10). The dependence on ionic strength of the formation constants was modeled by a simple Debye–Hückel type equation and by the SIT approach. By analyzing the stability of the species in the three different systems we found a simple additivity rule that can be expressed by the relationship: log₁₀ K = 6.46 n_N + 3.96 n_O − 0.60 (n_N²+ n_O²), with a mean deviation, ε(log₁₀ K) = 0.15 (K = equilibrium constant for the interaction of the organometal cation with the unprotonated or protonated ligand, n_N = number of amino groups and n_O = number of carboxylic groups of the ligand(s) involved in the formation reaction of complex species).     

Investigation of solution and solid-state properties of poly(R,R,4,4-cyclohexylidene diphenylene diphenyl-4,4-disulfonate)

Solution and solid-state properties of poly(R,R^′,4,4^′-cyclohexylidene diphenylene diphenyl-4,4^′-disulfonate) (PS-6: R=R^′=H; PS-7: R=CH₃, R^′=H; PS-8: R=R^′=Cl; PS-9: R=CH₃, R^′=Cl and PS-10: R=R^′=Br) have been determined and discussed in terms of nature of the substituents. Ultrasonic velocity (2 MHz) and acoustical parameters of PS-7 and PS-9 solutions in chloroform, 1,2-dichloroethane and tetrahydrofuran (THF) at 30, 35 and 40 °C have been evaluated to understand the effect of methyl and chlorine groups, concentration, and temperature on molecular interactions. The data are interpreted in light of solvent-polymer and polymer-polymer interactions. Predominant solvation is observed in THF system and the least in chloroform system at all three temperatures. The structural change is observed above 2%. Both the polymers possess structure-forming tendency and it is supported by positive values of S_n.The densities of PS-7 and PS-9 determined by floatation method are in excellent agreement with calculated values but those determined by specific volume method differ remarkably from calculated values due to solvation effect. PS-7 and PS-9 possess respectively tensile strength of 38.4 and 1.1 N/mm²; electric strength of 16.2 and 25.0 kV/mm and volume resistivity of 5.7×10¹⁶ and 1.0×1017Ωcm. The low tensile strength of PS-9 is due to low molecular weight, rigid and brittle nature of the polymer chains. PS-6 to PS-9 are thermally stable up to about 349-379 °C while PS-10 up to about 279 °C and involved two-step degradation. DTA thermograms indicated T_g at about 204-226 °C. High activation energy indicated rigid nature of the polymer chains and the positive magnitudes of ΔS* indicated less ordered transition state. The nature of the substituents (CH₃, Cl and Br) affected thermal, mechanical and electrical properties.     

Oscillator Strength Calculations with the Compromised Orbitals

The oscillator strength has been calculated from a common set of compromised orbitals, instead of sets of the two separately optimized non-orthogonal orbitals for the two states involved in the transition. Inaccuracies of two types arose from the calculations were assessed by investigating simple atomic and molecular systems.