声音震碎酒杯实验

利用喇叭播放频率逐渐变化的声音,当声音的频率与酒杯的固有频率相同时,酒杯发生共振,从而震碎.     

Effect of C60 ion sputtering on the compositional depth profiling in XPS for Li(Ni,Co,Mn)O2 electrodes

The performance of a Li-ion cell strongly depends on the solid-electrolyte interface (SEI) on electrodes. The depth distribution of composition in SEI is normally determined by means of X-ray Photoelectron Spectroscopy (XPS) via Ar ion sputtering. Recently, a new kind of ion gun using C60 ions as sputtering source was introduced. In this report, a comparison between the effects of these two kinds of ion guns on the quantification of Li(Ni,Co,Mn)O₂ electrodes was made. It was found that the C60 ion gun is more suitable for analyzing the composition and chemical state of Li(Ni,Co,Mn)O₂ electrode since that it causes lower chemical damage in the superficial layer.     

Optimization and numerical simulation for the extraction system of the H- multicusp ion source

A new ion source has been designed and manufactured for the CYCLONE30 accelerator, which has a much advanced performance compared with the original. It is expected that the newly designed ion source extraction system will transport a very large percentage of the beam without deteriorating the beam optics, which is designed to deliver an H- beam at 30 keV. The accelerator assembly consists of three circular aperture electrodes made of copper. The simulation study was focused on finding parameter sets that raise the beam perveance as large as possible and which reduce the beam divergence as low as possible. Ion beams of the highest quality are extracted whenever the half-angular divergence is minimum, for which the perveance current intensity and the extraction gap have optimum values. The triode extraction system is designed and optimized by using CST software （for Particle Beam Simulations）. The physical design of the extraction system is given in this paper. From the simulation results, it is concluded that it is possible to achieve this goal by decreasing the thickness of the plasma electrode, shortening the first gap, and adjusting the acceleration electrode voltage.     

低能离子束诱导Ag表面纳米金字塔微结构

利用离子束溅射诱导实验方法,在单晶Si(100)基底上辅助沉积银膜,研究了低能Ar+离子束30°入射时,不同离子束能量和束流密度以及基底温度对Ag纳米结构的影响.结果表明:在较低基底温度下(32~100℃)辅助沉积银膜,膜层表面会呈现排列紧密、晶粒尺寸一致的金字塔状纳米结构.当温度升高时(32~200℃),纳米微结构横向尺寸λc迅速增加,而粗糙度先减小(32~100℃)后迅速增大(100~200℃);当离子束能量1 400eV、束流密度15~45μA/cm2时,在相同温度下,随着离子束束流密度的增大,纳米晶粒横向尺寸基本不变,粗糙度略有增加;当离子束流密度为15μA/cm2、能量1 000~1 800eV时,在相同温度下,随着离子束能量的增加,银纳米结构尺寸增加,而表面粗糙度先增加,然后缓慢减小.自组织纳米结构的转变是溅射粗糙化和表面驰豫机制相互作用的结果.     

A local-world heterogeneous model of wireless sensor networks with node and link diversity

In this paper, we present a novel local-world model of wireless sensor networks (WSN) with two kinds of nodes: sensor nodes and sink nodes, which is different from other models with identical nodes and links. The model balances energy consumption by limiting the connectivity of sink nodes to prolong the life of the network. How the proportion of sink nodes, different energy distribution and the local-world scale would affect the topological structure and network performance are investigated. We find that, using mean-field theory, the degree distribution is obtained as an integral with respect to the proportion of sink nodes and energy distribution. We also show that, the model exhibits a mixed connectivity correlation which is greatly distinct from general networks. Moreover, from the perspective of the efficiency and the average hops for data processing, we find some suitable range of the proportion p of sink nodes would make the network model have optimal performance for data processing.     

速调管离子噪声特性的模拟分析

 离子噪声已成为影响现代微波管性能的一个重要因素，采用一维混合模型研究了速调管的离子噪声，用自编的1维粒子模拟程序对速调管的离子噪声特性进行了分析。采用小信号近似，从理论上推导出了速调管离子噪声与相位畸变关系的表达式，表明微波管相位噪声直接来源于管内离子量的变化。模拟了有离子噪声时速调管的相位特性，对模拟过程做了离子诊断并与实验结果进行比较，证明了模拟过程的正确性。探讨了电子束电流、电压以及聚焦磁场对离子噪声的影响规律，束电流与束电压改变后，离子噪声的周期与大小相应改变，增大束电流，离子噪声幅度会下降，并趋于稳定，而在束电流不变的情况下，离子噪声存在一个最小值。束电流与束电压确定，存在最佳的磁场使离子噪声幅度最小。     

Magnetic properties and morphology of Ni nanoparticles synthesized in gas phase

We report on the size, structure and magnetic properties of Ni nanoparticles fabricated with a free-jet sputtering nanoparticle source. It is found how the pressure of the inert gas and the diameter of the source nozzle can control the particle size and coercivity in a wide range. Measurements of the specific magnetic moment of Ni nanoparticles are reported. A particular growing regime is found at high pressures over 1.8 mbar observing a further aggregation process that leads to nanoparticle agglomerates with diameters larger than 100 nm with a low dispersion in size.     

有耗异向介质层覆盖普通介质圆柱电磁特性的研究

研究了线电流源平行放置在有耗异向介质层覆盖的无限长介质圆柱附近模型的电磁特性.首先,提出电磁模型并给出此电磁模型的精确解.其次,利用精确解进行数值计算,得到不同电磁参数情况下该电磁模型的近场分布图形,并通过方向性系数和归一化辐射阻抗研究其远场特性.由于有耗异向介质的负折射特性和损耗的同时作用,相比于无耗异向介质层以及有耗普通介质层,得到了有耗异向介质层覆盖普通介质圆柱模型在近场和远场特性上极为不同的电磁特性. 关键词： 线电流源 异向介质 方向性系数 辐射阻抗     

LED照明的光栅光调制器光学特性分析与实验

针对一种新型的光凋制器--光栅光调制器,研究用LED作为其照明光源时对光学调制特性的影响.以部分相干光理论为依据,结合MATLAB仿真,推导出用LED照明光栅光调制器时,光源带宽对成像对比度具有较大的影响,通过滤色片将光源带宽减小到13 nm时,像面上的对比度约为150,进一步减小带宽至10 nm,对比度将达到225.光源的尺寸在与光源到光栅光调制器之间的距离相比小于0.03时,对光栅光调制器的光学信息处理不会有影响,并通过实验加以证实,从而说明采用LED作为光栅光调制器照明光源的可行性.