The Effect of Alkane Chain Length on the Liquid–Liquid Critical Temperatures of Oligostyrene/Linear-Alkane Mixtures

Summary. Upper critical solution temperatures (UCSTs) for liquid–liquid demixing in a set of mixtures of linear alkanes (pentane (N ₁=5) to pentacontane (N ₁=50)) with an oligostyrene (1241amu, N ₂=12) are reported. We find strong correlation between the Hildebrand solubility parameters of the alkanes and the UCST. Correlations are developed which enable predictions concerning the miscibility of mixtures of compounds with longer chains.     

Liquid-liquid equilibria of polyrotaxane and poly(vinyl alcohol)

Liquid–liquid equillibria (LLE) of the tertiary system of hydroxypropylated polyrotaxane (HPPR)–poly(vinyl alcohol) (PVA)–solvent have been investigated by focusing on the internal structures of HPPR–PVA blend gels. The phase diagrams of the HPPR–PVA aqueous systems displayed two liquid phases at a high concentration and molecular weight of PVA. This result was consistent with the prediction of the Flory–Huggins lattice model. On the contrary, the HPPR–PVA–DMSO system exhibited only a single phase. The HPPR–PVA blend gels crosslinked in dimethylsulfoxide (DMSO) were highly transparent over a wide concentration range, while the gels prepared in water were opaque at high polymer concentrations. Spherical domains were observed in the opaque gels by laser scanning confocal microscopy, and the sizes of the domains were significantly dependent on the amount of cross-linking reagent utilized. These results indicated that the transparency of the HPPR–PVA blend gels was strongly affected by the competition between the liquid–liquid two-phase separation and the crosslinking HPPR and PVA polymers during the preparation of the blend gels.     

Design of two-dimensional biomimetic uranyl optrode and its application to the analysis of natural waters

A two-dimensional biomimetic optrode for the detection and quantification of uranium in natural waters was fabricated. The sensing element was designed by the inclusion of uranyl ion imprinted polymer particles into polymethyl methacrylate followed by casting a thin film on a glass slide without any plasticizer. The ion imprinted polymer material was prepared via covalent immobilization of the newly synthesised ligand 4-vinyl phenylazo-2-naphthol by thermal polymerization. Operational parameters such as pH, response time and the amount of sensing material were optimized. The response characteristics of the imprinted and the corresponding non-imprinted polymer inclusion optrodes of uranium were compared under optimum conditions. The imprinted polymer inclusion optrode responds linearly to uranium in the concentration range 0–1.0 μg mL⁻¹ with a detection limit of 0.18 μg mL⁻¹, which is much better than the solution studies using 4-vinyl phenylazo-2-naphthol (1.5 μg mL⁻¹). Triplicate determinations of 100 μg of uranium(VI) present in 250 mL of solution gave a mean absorbance of 0.018 with a relative standard deviation of 8.33%. The superior sensitivity of imprinted polymer inclusion optrode is exemplified by lower detection limits and broader dynamic range over non-imprinted polymer inclusion optrode. The developed imprinted polymer inclusion optrode was found to give stable and precise response for 3 months and can be used without any loss in sensitivity. The applicability for analysing ground, lake and tap-water samples collected in the vicinity of uranium deposits was successfully demonstrated.     

Potentiometric determination of fluoride in geological and biological samples following pyrohydrolytic decomposition

A method for the determination of fluoride in coal, coal fly ash, phosphate rock, limestone, mineral clay, fossilised materials, oyster tissue and vegetation using pyrohydrolysis for sample decomposition is proposed. A specific apparatus was constructed and the influence of vanadium pentoxide (V₂O₅) as a catalyst for the pyrohydrolysis reaction was investigated. It was verified that V₂O₅ does not influence the release of fluoride from the vegetation, oyster tissue, coal and coal fly ash matrices analysed. However, the catalyst was necessary for the phosphate rock, fossil bone, mineral clay and limestone samples. Certified and noncertified samples were analysed using an ion selective electrode (ISE) for the analyte detection. Precise (relative standard deviation—R.S.D.<7%) and accurate (recovery in accordance to certified values) results were obtained. The limit of quantification (LOQ) of the method was 5.0 μg g⁻¹ of fluoride using 20 mg of sample and a final dilution to 10 ml. The sample frequency was five samples per hour.     

Studies of polyamines transport through liquid membranes with D2EHPA as a carrier

The transport of polyamines through the liquid membranes with di-2-ethylhexyl phosphoric acid (D2EHPA) was investigated. The study was performed in three main steps: liquid-liquid extraction (LLE), bulk liquid membrane (BLM) extraction, and supported liquid membrane (SLM) extraction. Equilibrium distribution experiments allowed determining the extraction constants and stoichiometric coefficients for each polyamine. It turned out that one amino group binds two molecules of carrier (one D2EHPA dimer) and the extractability of polyamine rises with the increase in number of function groups in the molecule. The BLM and SLM experiments showed that despite considerable differences in distribution ratio between various polyamines the extraction efficiencies for all of them are very approximate. The smaller diamines compensate the lowest affinity to membrane phase with faster interface reaction kinetics and higher diffusivity. Finally, the SLM extraction conditions were optimized. The main parameters that influence the transport are the pH of the donor and acceptor phases. The extraction efficiencies obtained for polyamines are high (80-90%) and give hope for an application in bioanalytical chemistry.     

Quantitative evaluation of the binding of phenylarsenic species to glutathione, isotocin, and thioredoxin by means of electrospray ionization time-of-flight mass spectrometry

An attempt was made to quantitatively describe the binding of phenylarsenic species to thiol-containing biomolecules using electrospray ionization mass spectrometry (ESI-MS). The extent of the reactions of phenylarsine oxide (PAO) with the peptides glutathione and isotocin (ITC) and with the protein thioredoxin resulting in covalent As--S bonds were quantified by deriving the dependence of the corresponding ion signal intensities on the concentration of the reaction products. Problems complicating a quantitative evaluation of the mass spectra, such as signal suppression effects, were critically evaluated. Equilibrium constants for condensation reactions as well as formation constants for noncovalent associations were calculated by means of ESI-MS signal intensities. The comparison of the reaction of PAO with different thiol reactants revealed the highest binding affinity for ITC followed by thioredoxin and a lower affinity to glutathione. Possibly, the intramolecular formation of RS-As(C(6)H(5))-SR occurring in case of ITC and thioredoxin is favored over the intermolecular product involving two molecules glutathione even though the molecular mass of glutathione (307 g mol(-1)) is much smaller than that of ITC (966 g mol(-1)) and thioredoxin (11 688 g mol(-1)). A similar binding affinity for trivalent (K approximately 1.6 x 10(-3) l micromol(-1)) and pentavalent (K approximately 1.6 x 10(-3) and 1.0 x 10(-3) l micromol(-1)) arsenic species was found for the formation of a noncovalent complex of glutathione with different phenylarsenic compounds.     

Microwave-assisted high-throughput acid hydrolysis in silicon carbide microtiter platforms--a rapid and low volume sample preparation technique for total amino acid analysis in proteins and peptides

An efficient microwave-assisted high-throughput protein hydrolysis protocol was developed utilizing strongly microwave absorbing silicon carbide-based microtiter platforms. The plates are equipped with 20 bore holes having the proper dimensions for holding standard screw-capped HPLC/GC vials. Due to the possibility of heating up to four heating platforms simultaneously (80 vials), parallel microwave-assisted acid hydrolyses can be performed under carefully controlled conditions significantly reducing the overall time required for protein hydrolysis and the subsequent evaporation step required for larger volumes of acid. An extensive optimization of the hydrolysis conditions has demonstrated that 5min irradiation at 160°C with 6N HCl leads to comparable results in terms of total and individual amino acid recovery as the traditional method requiring 24h heating at 110°C. Complete hydrolysis of several proteins and synthetic peptides was performed using 25μg of sample material and 100μL of 6N HCl in a dedicated low-volume HPLC/GC vial. Since the hydrolysis and subsequent analysis can be performed from the same vial, errors caused by sample transfer can be minimized. Control experiments have demonstrated that the observed rate enhancements are the result of a purely thermal/kinetic effect as a consequence of the considerable higher reaction temperatures.     

Effects of Strong Ion‐Pairing on the Electrochemical Reduction of Cyclooctatetraene in Tetrahydrofuran in the Presence of Lithium Ion. Peak Coalescence Does Not Imply Potential Inversion

The first study of the voltammetric reduction of cyclooctatetraene (COT) in tetrahydrofuran (THF) in the presence of lithium ion is reported. A single wave is observed at ?2.23 V vs. Ag/0.1 M AgNO₃. Density functional calculations have been carried out on a variety of COT/Li/THF species in order to clarify the nature and role of ion pairing in this system. The dominant species in solution are the COT/Li/(THF)₂ anion radical and the COT/Li₂/(THF)₄ dianion. Computer simulations have been carried out to further understand the effects of ion pairing on the reduction. The simulations show that coalescence of two waves into one can occur in the presence of strong ion pairing even when the second reduction potential is negative of the first.     

Thermodynamique des melanges binaires LiPO3-Pb(PO3)2: Diagramme de phases et étude thermodynamique du liquide

Study of solid-liquid phase diagram of LiPO₃-Pb(PO₃)₂ binary system, in certain calcination conditions, shows the existence of several metastable phasis. When heated at a temperature of 723 K the binary mixtures lead uncompletely to a defined compound Pb₂Li(PO₃). On heating these ternary solid mixtures, three eutectic reactions have been observed: LiPO₃+Pb(PO₃)₂→Liquid at a temperature of 793 K(1) LiPO₃+Pb₂Li(PO₃)₅→Liquid at a temperature of 843 K (2) Pb₂Li(PO₃)₅+Pb(PO₃)₂→Liquid at a temperature of 891 K (3) The metastable liquid phase appears in the system at temperature of 793 K. DTA experiments performed on the binary LiPO₃-Pb(PO₃)₂ mixtures, show a superposition of two diagrams. The first one is metastable and the second represents the stable equilibrium phase diagram. Measurements of liquid enthalpy of binary LiPO₃-Pb(PO₃)₂ system at temperature of 979.65 K were reported. The corresponding values were very small and so the binary system can be considered as athermal. Assuming an ideal behaviour, the liquidus curves in the metastable diagram were calculated and the eutectic reaction (LiPO₃-Pb(PO₃)₂→Liquid) was confirmed at 793 K. This revised version was published online in August 2006 with corrections to the Cover Date.     

Zirconium ion selective electrode based on bis(diphenylphosphino) ferrocene incorporated in a poly(vinyl chloride) matrix

A novel potentiometric zirconium - PVC matrix membrane sensor incorporating bis(diphenylphosphino) ferrocene as an electroactive material and tris(2-ethylhexyl)phosphate as solvent mediator is described. In mixed acetate buffer solution of pH 4.8, the sensor displays a rapid and linear response for zirconium ion over the concentration range 1.0 × 10⁻¹ to 1.0 × 10⁻⁷ mol L⁻¹ with a good slope of 59.7 ± 0.3 mV per decade and detection limit 1.8 × 10⁻⁸ mol L⁻¹. The best performance was obtained with membrane composition 33% PVC, 65% TEHP, 1% NaTPB and 1% ionophore. The proposed electrode revealed excellent selectivity for zirconium ion over a wide variety of alkali, alkaline earth, transition and heavy metal ions and could be used in a pH range of 4.15-7.8. The electrode was applied for at least 1 month without any considerable divergence in the potential responses. The practical utility of the electrode has been demonstrated by its use as an indicator electrode in the potentiometric titration of zirconium ions with sodium fluoride and in determination of zirconium ion in some alloy, tape and waste water samples.