Plasma-chemical decomposition of methane during diamond synthesis

Using a mass spectrometric sampling method, we have observed the decomposition of CH₄ in an rf plasma usedfor diamond deposition. The gas samples were extracted through an orifice located downstream of the plasma zone and analyzed online. For the experiments a dilute mixture of H₂ and CH₄ containing 0.1–3% CH₄ has been used. CH₄ is converted to C₂H₂ and C₂H₄ quantitatively. Small amounts of heavier hydrocarbons are formed. A comparison of the experimental results with a recent kinetic model treating a purely thermal environment is made and the differences between our experiment and the model are explained. The role of acetylene as a species formed in an atmosphere rich in atomic hydrogen is proposed. The electron impact dissociation process is suggested as the rare-determining step in the plasma-chemical decomposition of methane.     

LC-ESI-MS/MS and cytotoxic activity of three Pistacia species

LC-ESI-MS/MS was used for a comprehensive characterisation of ethanol extract from the leaves of three Pistacia species. After optimisation of the method and the use of the negative ionisation mode, a total of 42 different compounds were identified, of which 22 were tentatively characterised in P. chinensis Bunge, 33 in P. khinjuk stocks and 25 in P. lentiscus L. leaves. Flavonoids, phenolic acids, and their derivatives were the most abundant identified compounds. LC-ESI-MS/MS revealed identification of 15, 18 and 6 not previously detected compounds in P. chinensis Bunge, P. khinjuk Stocks and P. lentiscus L., respectively. The three extracts were also tested for their cytotoxic activities against human PC3 prostate cancer, A549 lung cancer, MCF7 breast cancer and HepG2 liver cancer. Generally, all the extracts have a moderate cytotoxic activity against lung, breast and prostate cancer, with different IC₅₀. However, only P. lentiscus L. showed moderate activity against liver cancer.     

In-gel deglycosylation of sodiumdodecyl sulfate polyacrylamide gel electrophoresis-separated glycoproteins for carbohydrate estimation by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Mass determination by mass spectrometric methods (electrospray ionization mass spectrometry (ESI-MS), matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS)) of sodiumdodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE)-separated proteins is a well known procedure and reliable protocols are available. In our efforts to use the established methods to determine the molecular mass of the disulfide bridged, heterodimeric glycoprotein GP3 and to determine the carbohydrate content of each protein subunit we developed an in-gel chemical deglycosylation method. For this purpose we established experimental conditions that allow maximum extraction of the high molecular mass protein subunits and developed a routine method to apply the HF-pyridine deglycosylation protocol to proteins isolated from polyacrylamide gel pieces. The novel protocol and extraction procedure described can be used to analyze O-glycosylated proteins up to 150 kDa after SDS-PAGE separation.     

Study on the Tautomer Interconversion of 3-Oxo Pentanoate During Gas Chromatography

Enol and keto tautomers of methyl 3-oxo pentanoate could be separated on a HP-5 capillary column. The chromatographic peaks were identified by examining characteristic mass ions arose from the corresponding enol and keto molecular ions. The study showed that the area percentage of enol tautomer is a function of temperature of the column. Treating the column as a reactor, the energy of activation for the on-column tautomerization could be extracted (35.1 kJ mol⁻¹) by monitoring the loss of the enol tautomer, because the reaction is found to obey pseudo first-order kinetics. The enthalpy and the entropy changes (ΔH = −3.98 kJ mol⁻¹, ΔS = −7.89 J K⁻¹mol⁻¹) for the enol-to-keto reaction in the stationary phase were also obtained.     

Potentiometric determination of fluoride in geological and biological samples following pyrohydrolytic decomposition

A method for the determination of fluoride in coal, coal fly ash, phosphate rock, limestone, mineral clay, fossilised materials, oyster tissue and vegetation using pyrohydrolysis for sample decomposition is proposed. A specific apparatus was constructed and the influence of vanadium pentoxide (V₂O₅) as a catalyst for the pyrohydrolysis reaction was investigated. It was verified that V₂O₅ does not influence the release of fluoride from the vegetation, oyster tissue, coal and coal fly ash matrices analysed. However, the catalyst was necessary for the phosphate rock, fossil bone, mineral clay and limestone samples. Certified and noncertified samples were analysed using an ion selective electrode (ISE) for the analyte detection. Precise (relative standard deviation—R.S.D.<7%) and accurate (recovery in accordance to certified values) results were obtained. The limit of quantification (LOQ) of the method was 5.0 μg g⁻¹ of fluoride using 20 mg of sample and a final dilution to 10 ml. The sample frequency was five samples per hour.     

Synthesis and characterization of new polyamides derived from di(4-cyanophenyl)isosorbide

New optically active polyamides were synthesized according to two ways: using a microwave-assisted polycondensation of an optically active isosorbide-derived diacylchloride with different aromatic diamines in NMP and using interfacial polymerization from an isosorbide-derived diamine with different diacylchlorides. The polymers are obtained with inherent viscosities in the range from 0.11 to 1.05 dL/g. The DSC and TGA measurements clearly demonstrate the high thermal stability of these polymers when considering the range of the melting points from 200 °C to 300 °C and the absence of decomposition till 350 °C.     

Sequential injection analysis for benzophenone-4 and phenylbenzimidazole sulphonic acid in sunscreen sprays by solid-phase extraction coupled with ultraviolet spectrometry

A sequential injection UV method was developed to determine benzophenone-4 (BZ4) and phenylbenzimidazole sulphonic acid (PBS) simultaneously, these being the most commonly used UV-filters in aqueous formulations used as sunscreen sprays. The selective elution of both was performed by on-line solid-phase extraction, by retention on a SAX microcolumn and separation by varying the pH of elution. The sensitivity obtained was 0.042±0.001 ml μg⁻¹ for PBS and 0.0159±0.0003 ml μg⁻¹ for BZ4. The limit of detection was 1.6 μg ml⁻¹ for PBS and 0.6 μg ml⁻¹ for BZ4. The R.S.D. of the results was 1-6% for PBS and 1-12% for BZ4. The method was validated using commercial sunscreen formulations with concentrations determined by a liquid chromatographic procedure. The two procedures gave comparable results. Automation of the method means the amount of reagents used and residues generated are decreased. The system allows the required analysis sequence to be programmed using suitable software.     

Analysis of dinitro- and amino-nitro-toluenesulfonic acids in groundwater by solid-phase extraction and liquid chromatography–mass spectrometry

A reversed-phase LC–MS method with quadrupole-time of flight (QTOF) detection has been developed for the determination of four dinitro-toluenesulfonic acids and two amino-nitro-toluenesulfonic acids in groundwater. The analytes were separated by HPLC with 0.1% (v/v) formic acid as mobile phase modifier compatible with mass spectrometric detection. QTOF-MS analysis with negative ion electrospray ionization afforded good selectivity and sensitivity for analysis of the dinitro- and amino-nitro-toluenesulfonic acids. Structure elucidation and confirmation were accomplished by tandem mass spectrometry. Characteristic ions resulting from the loss of NO, NO₂, and SO₂ from the [M–H]^– ions were detected. An intense fragment ion at m/z 80 representing the [SO₃]^– ion was detected for all dinitro- and amino-nitro-toluenesulfonic acids. Solid-phase extraction using a co-polymer cartridge was developed for preconcentration of the analytes from water. Good recovery (>85%) was achieved when 0.1% formic acid was added into the water samples before extraction. Method detection limits ranged from 10 to 76 ng L^–1 for the targeted compounds when 10 mL water was analyzed. Groundwater samples collected from wells close to a former ammunition plant in Stadtallendorf, Germany, were analyzed for the dinitro- and amino-nitro-toluenesulfonic acids.     

Mixed hybrid bilayer lipid membrane incorporating valinomycin: improvements in preparation and functioning

The paper deals with the reconstruction of lipid bilayer membranes on a Au-covered polycarbonate membrane. Such a kind of like-biomembranes (namely mixed hybrid bilayer lipid membrane (MHBLM)) are characterised by appreciable long-term stability. Here we describe changes that have been made in the geometry of the experimental device in order to avoid artefacts and render membrane reproduction easier. Incorporation of valinomycin was performed to check the membrane and its stability: conductance and membrane potential following the changes of ion concentration were recorded. This new approach permits increase of successful trials and renders possible, when it breaks, easily formation of a new MHBLM on the same Au-covered polycarbonate membrane support. Finally, the stability shown by the MHBLM renders this system a promising tool for use under flowing conditions.     

Thermal behavior of bismaleimide resin

The cure of a bismaleimide (BMI) neat resin modified with an aromatic diamine and a siloxane elastomer, has been studied by ¹³C solid state nuclear magnetic resonance. Two chemical reactions occur during the cure cycle; at a low temperature, Michael's reaction predominates, while at a high temperature the polymerization of the double bond maleimide creates the network. The degradation of this BMI material was characterized with isothermal and dynamic thermogravimetric analyses in air and in nitrogen. The BMI thermal stability is lower in nitrogen than in air. This behavior is an indication of oxygen participating in reactions at high temperatures. The activation energy (E_a) of thermal degradation was determined from isothermal data using an Arrhenius equation (In V vs. 1/T). The global E_a for the weight loss in air was found to be 91 kJ/mol. The nature and the evolution of the thermal degradation products were the combined analyzed by techniques of pyrolysis, gas chromatography and mass spectrometry. The major thermal decomposition products obtained in the temperature range of 300–700°C are identified as benzene, methyl formamide, aniline, toluene and isocyanate-derived products.