Electrochemical synthesis of coatings in the system Ti-Si-B from molten salts

Powder and coatings of metal-like refractory compounds (MLRC) can be produced by electrochemical synthesis from molten salts. The stoichiometry of the deposited MLRC was found to correlate with the molar ratio of MLRC component ions in the melts. The system Ti-Si-B is of particular interest in terms of electrochemical synthesis since the titanium, silicon and boron potentials in the melt are close together. The electrochemical synthesis has been investigated in the system NaCl-KCl-NaF-K₂TiF₆-K₂SiF₆-KBF₄ at 700°C. The opportunity of deposition of new ternary compound in the system Ti-Si-B is shown by the electrochemical synthesis from molten salts.     

The Chemistry of Dichloromethylenammonium Salts (“Phosgenimonium Salts”)

Dichloromethylenammonium salts, particularly dichloromethylenedimethylammonium chloride, occupy a unique place as stable but reactive building blocks for synthesis. They contain three mobile chlorine atoms activated by an amino group on the same carbon atom. These salts can be regarded as chlorinated Vilsmeier or Mannich reagents and are thus at a higher oxidation level. As in the Mannich or Vilsmeier reaction, the carbon condenses here as an electrophile with formation of C? C or C? hetero atom bonds in a variety that is still far from being exhausted.     

Ba-K-Bi-O超导体熔盐阳极电结晶研究

用ＸＰＳ和ＸＲＤ表征了Ｂａ－Ｋ－Ｂｉ－Ｏ超导体熔盐电结晶的阳极和阴 极产物，用ＳＥＭ分析了Ｂａ－Ｋ－Ｂｉ－Ｏ单生长形态。结果表明，阳极产物是Ｂａ－Ｋ－Ｂｉ－Ｏ超导体单晶，以台阶式方式生长。－Ｋ－Ｂ－     

Study of Factors Affecting the Performance of Voltammetric Copper Sensors Based on Gly‐Gly‐His Modified Glassy Carbon and Gold Electrodes

This paper reports a study of the factors affecting the analytical performance of gold and glassy carbon electrodes modified with the tripeptide Gly‐Gly‐His for the detection of copper ions. Gly‐Gly‐His is attached to a glassy carbon (GC) surface modified with 4‐carboxyphenyl moieties or a gold surface modified with 3‐mercaptopropionic acid by the reaction of the N‐terminal amine group of the peptide with the carboxylic acid groups of the monolayer via carbodiimide activation. X‐ray photoelectron spectroscopy was used to characterize the steps in the biosensor fabrication. It was found that the analytical performance of a sensor prepared with Gly‐Gly‐His on a GC electrode was similar to that on a gold electrode under the same conditions. The performance was greatly enhanced at higher temperature, no added salt during copper accumulation and longer accumulation time within a pH range of 7–9. Interference studies and investigations of stability of the Gly‐Gly‐His sensor are reported. Analysis of natural water samples show that the sensors measure only copper ions that can complex at the sensor surface. Strongly complexed copper in natural water is not measured. Despite greater stability of diazonium salt derived monolayers on carbon surfaces compared with alkanethiols self‐assembled monolayers on gold, the stability of the sensors was essentially the same regardless of the modification procedure.     

Novel polycationic biocides: Synthesis and antibacterial activity of polymeric phosphonium salts

Various polymeric phosphonium salts and the corresponding low-molecular-weight model compounds were prepared and their antibacterial activities against Staphylococcus aureus and Escherichia coli were explored by the viable cell counting method in sterile distilled water. Antibacterial activity of the polymers was found to be higher than that of the corresponding model compounds, particularly against S. aureus. Furthermore, the polymeric phosphonium salt exhibited a higher activity by 2 orders of magnitude than the polymeric quaternary ammonium salt with the same structure except the cationic part. Compounds with the longest alkyl chain (octyl) studied were found to exhibit particularly high activity, and this finding may be ascribed to the contribution of the increased hydrophobicity of the compounds to the cidal activity. © 1993 John Wiley & Sons, Inc.     

Catalytic Sandmeyer cyanation as a synthetic pathway to aryl nitriles

Aryl nitriles ArCN were obtained by the Cu(I)/Cu(II) catalysed reaction of aryl diazonium salts with KCN in good yields.     

Thermal decomposition of rare earth element enanthates

The conditions of formation of Y, La and lanthanide (from Ce(III) to Lu) enanthates were worked out, their composition and their solubilities in water at 291 K were determined, and the conditions of their thermal decomposition were studied. They were prepared as crystalline solids with general formula Ln(C₇H₁₃O₂)₃·nH₂O, wheren=2–10. On heating, they decompose in two or three steps. They first lose some water molecules and then decompose to the oxides directly (salts of Y and heavy lanthanides) or via the intermediate formation of Ln₂O₂CO₃ (salts of La, Pr, Nd, Sm and Eu). Only yttrium enanthate dihydrate loses 2 water molecules on heating to form an anhydrous complex, which decomposes directly to Y₂O₃. The temperatures of dehydration are similar for all complexes (323–343 K), while the temperatures of oxide formation vary irregularly from 823 K for CeO₂ to 1078 K for La₂O₃.     

Thermodynamic simulation of four-component carnallite type systems

Summary The standard method ofPitzer for predicting the solubility isotherms of systems in which solid phases with a constant composition crystallize is applied to cases when mixed crystals are formed. The four-component carnallite type systems RbCl-CsCl-MgCl₂-H₂O, RbCl-KCl-MgCl₂-H₂O, and RbCl-RbBr-MgCl₂-MgBr₂-H₂O and the corresponding subsystems are thermodynamically simulated at 25°C. It is established that the solubility diagrams consist of crystallization regions of the simple saltsMX,MX, MgX ₂·6H₂O, and MgX₂·6H₂O and of the corresponding carnallite type double salts with the composition 1:1:6. A method of calculation of the integralGibbs energy of mixingG ^mix(s) of crystals formed in water-salt systems has been proposed. The results on the systems RbCl-KCl-H₂O, RbCl-RbBr-H₂O, and MgCl₂-MgBr₂-H₂O are compared with experimental data from the literature and with values calculated using various models.

---

Thermodynamische Simulation von Vierkomponentensystemen des Carnallit-Types

Zusammenfassung DiePitzer-Methode zur Voraussage der Löslichkeitsisothermen in Mehrstoffsystemen, in welchen feste Phasen mit konstanter Zusammensetzung auskristallisieren, wurde auch für Fälle angewendet, bei denen sich Mischkristalle bilden. Die Vierstoffsysteme RbCl-CsCl-MgCl₂-H₂O, RbCl-KCl-MgCl₂-H₂O und RbCl-RbBr-MgCl₂-MgBr₂-H₂O, aus welchen Carnallit-Typ-Mischkristalle auskristallisieren, und die dazugehörigen Dreistoff-Randsysteme wurden bei 25°C simuliert. Man stellt fest, daß die Löslichkeitsdiagramme sowohl Kristallisationsbereiche der einfachen SalzeMX,M'X, MgX ₂·6H₂O und MgX ₂·6H₂O als auch der entsprechenden carnallitartigen Doppelsalze mit der Zuzammensetzung 1:1:6 umfassen. Eine Methode zur Berechnung derGibbs-EnergieG ^mix(s) für die in Wasser-Salz-Systemen gebildeten Mischkristalle wird vorgeschlagen. Die für die Systeme RbCl-KCl-H₂O, RbCl-RbBr-H₂O und MgCl₂-MgBr₂-H₂O erhaltenen Ergebnisse werden mit experimentellen Literaturdaten und Resultaten von Berechnungen aufgrund verschiedener Modelle verglichen.

     

Effect of the Structure of the Acyl Group on the Kinetics of Exchange between O-Nucleophiles

We have studied the rate of 15 reactions of acyl transfer from O-acyl salts of 4-dimethylaminostyryl-4-pyridine N-oxide to 4-morpholinopyridine and 4-dimethylaminopyridine N-oxides in acetonitrile solutions. Analysis of the results based on the Shaik – Pross approach and the Marcus equation shows that if the structure of the acyl group is varied, then the reactivity is determined by such parameters as the resonance interaction in the transition state (B) or the internal barrier (G ₀) of the reaction.     

Chemical reactivity of [1,2,3]triazolo[1,5-a]- and [1,5-c]-pyrimidinium salts

The chemical reactivity of the [1,2,3]triazolo[1,5-a]- and [1,5-c]-pyrimidinium salts towards morpholine, water and sodium methoxide have been studied. Among others, new 1-aza and 2-azabutadienes substituted by a [1,2,3]-triazole ring were obtained in the course of the opening of the positively charged pyrimidine ring.