Crosslinked poly(ethylene oxide) modified with tetraalkylammonium salts as phase transfer catalyst

Radiation crosslinked poly(ethylene oxide)s (PEO) modified with two tetraalkylammonium salts: allyldimethyldodecylammonium bromide and ethylmethacrylate dimethyldodecylammonium bromide were prepared. They have been characterized by elemental analysis, IR, ¹H-NMR spectra, and DSC measurements. Their activity as phase transfer catalysts (PTC) in the model displacement reaction of 1-bromooctane with aqueous sodium cyanide were studied. The reaction kinetics were followed under pseudo-first-order conditions. Small amounts of onium salt inserted into the PEO network gave rise to a five time increase in the rate constant. The recovered catalysts could be re-used without loss of activity. © 1995 John Wiley & Sons, Inc.     

Continuous,single-component,crystalline networks in polymer matrix and their vapor doping

It is shown, for the first time, that single-component continuous networks of a low molecular weight electron acceptor additive can be grown in a polymer matrix. Such networks can be doped using, e.g., iodine vapor and converted into conductive CT complexes without losing continuity, thereby making the polymer film conductive. Polyethylene films with tetrathiotetracene networks are obtained, and their doping with iodine vapor in air is investigated by means of conductivity and spectrophotometry in the visible range. It is concluded that doping of the surface layer of the microcrystallites is sufficient to observe a significant increase in the film conductivity, which makes possible the use of such systems as sensors.     

Solution viscosity behavior of polystyrene-based cationic ionomers. Effects of ion content and solvent

Dilute-solution viscosities of polystyrene-based cationic ionomers containing ammonio or phosphonio groups were measured in several solvents. In polar solvents with dielectric constant (ε_r) beyond 10, the ionomers showed a typical polyelectrolyte behavior, indicating that a large part of ionic groups were dissociated into ions. In nonpolar solvents with low ε_r, the reduced viscosity of the ionomers linearly decreased with a decreasing ionomer concentration. At low polymer concentrations, every ionomer gave a reduced viscosity lower than that of the corresponding chloromethylated polystyrene. With an increasing ion content, the intrinsic viscosity progressively decreased if the nonpolar solvents had a low acceptor number (A_N), such as toluene or tetrahydrofran (THF). In the halogenated solvents with high A_N value, such as chloroform, however, the intrinsic viscosity was hardly dependent on the ion content. This indicates that the intramolecular aggregation among the ionic groups is inhibited in the halogenated solvents due to a strong anion solvation. An addition of a protic solvent to a nonpolar solvent eliminates the aggregation between ionic groups and leads to polyelectrolyte behavior. © 1994 John Wiley & Sons, Inc.     

Synthesis and intramolecular recyclization of 2,2-dialkyl-6-chloro-4-hydroxymethyl-benzo[<Emphasis Type="Italic">f</Emphasis>]isoindolinium salts

The intramolecular cyclization of dialkyl(2-butynyl-4-hydroxy)[3-(p-chlorophenyl)propargyl]ammonium chlorides, catalyzed by aqueous KOH, was realized. It was shown that the obtained products — 2,2-dialkyl-6-chloro-4-hydroxymethylbenzo[f]isoindolinium chlorides — readily undergo recyclization under the action of a twofold molar amount of KOH in aqueous solution with heating with the formation of 4-dialkylaminomethyl-8-chloro-1,3-dihydronaphtho[1,2-c]furans. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 834–840, June, 2007.     

New aromatizational transformations of 4-methyl-4-trichloromethyl-substituted 2,5-cyclohexadiene triphenylphosphonium and pyridinium ylides: Abstraction or 1,6-migration of the CCl3 group

4-methyl-4-trichloromethylcyclohexadiene triphenylphosphonium ylide obtained by treatment of (1-methyl-1-tricholoromethylcyclohexa-2,4-dien-4-yl)-triphenylphosphonium bromide with BuⁿLi in THF is stabilized by the abstraction of the CCl₃ group to give (p-tolyl)triphenylphosphonium cation, which was isolated as the corresponding hydroxide. Conversely, an analogous pyridinium ylide, obtained by treatment ofZ/E stereoizomericN-(1-methyl-1-trichloromethylcyclohexa-2,5-dien-4-yl)pyridiunium bromide with a base (piperidine in CD₂Cl₂, BuⁿLi in THF), at temperatures above −40 °C, undergoes a novel high-yield aromatizational skeletal rearrangement with migration of the CCl₃ group to position 2 of the heterocycle. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 386–388, February, 1997.     

Polyaniline films doped with zinc salts and their properties

It has been found that thin polyaniline films doped with several zinc salts in solutions at pH 5.5 become electroconductive and electroactive in neutral aqueous electrolytes. The shape of the voltammetric characteristics depends on the initial state of the film. The effect of secondary doping withm-cresol is observed for polyaniline complexes with zinc salt of camphorsulfonic acid.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1450–1452, June, 1996.     

1-Acyldeoxyvasicinone salts as effective intermediate C-and N-acylating agents for alkaloids and amino acids

The reaction of deoxyvasicinone with acid chlorides of aliphatic (acetylbromide) and aromatic (benzoyl-, o-, p-methoxy-, p-nitrobenzoylchlorides) acids was studied. It was shown that 1-deoxyvasicinone salts were formed at room temperature; α-aroyloxymethylidenedeoxyvasicinones, in the presence of triethylamine at 80–85°C. It was found that acid chlorides cause 1-acyldeoxyvasicinone salts to transform into α-hydroxy-or α-aroyloxyarylidenedeoxyvasicinones, which indirectly confirmed their acylating properties. It was found that 1-acyldeoxyvasicinone salts were effective acylating agents for alkaloids (cytisine, 1,2-dihydrodeoxyvasicinone) and amino acids (glycine, β-alanine, α-aminobutyric acid) and can be used to acylate primary and secondary aliphatic and heterocyclic amines. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 6, pp. 585–589, November–December, 2006.     

Charge-discharge Behavior of Surface-coated LiMn2O3.95F0.05 Cathode Materials at High Temperature

With inorganic salts such as LiNO3, Li2CO3, surface-coated LiMn2O3.95F0.05 were prepared by melt-impregnation method. When these surface-coated LiMn2O3.95F0.05 were used as cathode materials, their charge-discharge characters were carefully compared. As a result, they exhibited good charge-discharge properties at 50℃ high temperature. Especially, LiNO3 surface-coated LiMn2O3.9F50.05 retained nearly 80% initial reversible capacity after 130 cycles at 50℃.     

Conductance of tetraalkylammonium salts in 2-butanone from −45 to 25°C

Interactions of three types of tetraalkylammonium cations (tetrapropyltetrabutyl-and tri-isoamylbutyl- ammonium) with perchlorate and tetraphenylborate anions were studied by the conductivity method in 2-butanone from –45°C to 25°C. Conductance data obtained for diluted solutions (5×10^–5 – 2×10^–3 mol-dm^–3) were used to calculate the limiting molar conductivities and associationconstants. The conductance equation of Fuoss-Hsia including the Chen term and the chemical model assumption were applied. Limiting ion conductivities were calculated assuming equal limiting conductivities of the i-Am₃BuN⁺ and BPh ₄ ^– ions at all temperatures. Gibbs energies and entropies of ion pair formation, calculated from the dependence of association constants on temperature, are presented including the contributions due to short-range forces.     

Novel pyridinium salts as cationic thermal and photoinitiators and their photosensitization properties

Novel pyridinium salts [N‐(α‐phenylbenzyl)‐, N‐(1‐naphthylmethyl)‐, or N‐cinnamyl p‐ or o‐cyanopyridinium hexafluoroantimonates] were synthesized by the reaction of p‐ or o‐cyanopyridine and the corresponding bromides followed by anion exchange with KSbF₆. These pyridinium salts polymerized epoxy monomers at lower temperatures than previously reported for N‐benzyl‐2‐cyanopyridinium hexafluoroantimonate. The o‐substituted pyridinium salts showed higher activity than the p‐substituted ones, and the crosslinked epoxy polymers cured with these initiators showed higher glass‐transition temperatures. These pyridinium salts photoinitiated radical polymerization as well as cationic polymerization. The photopolymerization was accelerated by the addition of aromatic ketones as photosensitizers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1037–1046, 2002