Swift heavy ion induced capacitance and dielectric properties of Ni/n-GaAs Schottky diode

The in-situ capacitance and dielectric properties of 25 MeV C⁴⁺ ion irradiated Ni/n-GaAs Schottky barrier diode (SBD) were studied at 100 kHz in the fluence range 5 × 10¹⁰ – 5 × 10¹³ ions/cm². The investigation shows reduction in capacitance and charge density with increase in ion fluence. Consequent changes were observed in other related parameters like conductance, dielectric constant, dielectric loss, loss tangent and electrical modulus. The results were interpreted in terms of generation of swift heavy ion induced acceptor trap states by electronic energy loss mechanism. Besides, the switch over characteristics of depletion to inversion regions in the CV plot reveals minority carrier recombination centers also. The dispersion and relaxation peaks observed in bias dependent dielectric plots were ascribed to the polarization and relaxation mechanism due to the interfacial trap states. The traps and recombination centers were found to alter the barrier characteristics of the fabricated SBD depending upon the ion fluence.     

Click‐Tag and Amine‐Tag: Chemical Tag Approaches for Efficient Protein Labeling In Vitro and on Live Cells using the Naturally Split Npu DnaE Intein

Protein labeling with synthetic moieties remains in many cases a technically challenging or unresolved task. Two new and simple concepts are presented. In both approaches, a very short tag of only a few amino acids is prepared with the desired chemical modification and, in a second step, it is transferred to the protein of interest by protein trans‐splicing. For the amine‐tag, a recombinant intein fragment free of lysine residues was generated such that the amine group of the N terminus could be selectively modified with regular amine‐reactive reagents. Thus, standard bioconjugation procedures without any chemical synthesis could be applied without modification of lysines in the protein of interest. For the click‐tag, protein trans‐splicing was combined with unnatural amino acid mutagenesis and subsequent bioorthogonal side chain modification, as demonstrated for click chemistry using p‐azidophenylalanine. By the two‐step strategy, exposure of the protein of interest to the copper catalyst was avoided.     

Sulfur-Modified Oxygen Vacancies in Iron–Cobalt Oxide Nanosheets: Enabling Extremely High Activity of the Oxygen Evolution Reaction to Achieve the Industrial Water Splitting Benchmark

The oxygen vacancies of defective iron–cobalt oxide (FeCoO_x-Vo) nanosheets are modified by the homogeneously distributed sulfur (S) atoms. S atoms can not only effectively stabilize oxygen vacancies (Vo), but also form the Co−S coordination with Co active site in the Vo, which can modulate the electronic structure of the active site, enabling FeCoO_x-Vo-S to exhibit much superior OER activity. FeCoO_x-Vo-S exhibits a mass activity of 2440.0 A g⁻¹ at 1.5 V vs. RHE in 1.0 m KOH, 25.4 times higher than that of RuO₂. The Tafel slope is as low as 21.0 mV dec⁻¹, indicative of its excellent charge transfer rate. When FeCoO_x-Vo-S (anode catalyst) is paired with the defective CoP₃/Ni₂P (cathode catalyst) for overall water splitting, current densities of as high as 249.0 mA cm⁻² and 406.0 mA cm⁻² at a cell voltage of 2.0 V and 2.3 V, respectively, can be achieved.     

Metal–Sulfur Linkages Achieved by Organic Tethering of Ruthenium Nanocrystals for Enhanced Electrochemical Nitrogen Reduction

Inspired by the metal–sulfur (M-S) linkages in the nitrogenase enzyme, here we show a surface modification strategy to modulate the electronic structure and improve the N₂ availability on a catalytic surface, which suppresses the hydrogen evolution reaction (HER) and improves the rate of NH₃ production. Ruthenium nanocrystals anchored on reduced graphene oxide (Ru/rGO) are modified with different aliphatic thiols to achieve M-S linkages. A high faradaic efficiency (11 %) with an improved NH₃ yield (50 μg h⁻¹ mg⁻¹) is achieved at −0.1 V vs. RHE in acidic conditions by using dodecanethiol. DFT calculations reveal intermediate N₂ adsorption and desorption of the product is achieved by electronic structure modification along with the suppression of the HER by surface modification. The modified catalyst shows excellent stability and recyclability for NH₃ production, as confirmed by rigorous control experiments including ¹⁵N isotope labeling experiments.     

面向脑机接口的犹他神经电极技术

A human brain is composed of a large number of interconnected neurons forming a neural network. To study the functional mechanism of the neural network, it is necessary to record the activity of individual neurons over a large area simultaneously. Brain-computer interface (BCI) refers to the connection established between the human/animal brain and computers/other electronic devices, which enables direct interaction between the brain and external devices. It plays an important role in understanding, protecting, and simulating the brain, especially in helping patients with neurological disorders to restore their impaired motor and sensory functions. Neural electrodes are electrophysiological devices that form the core of BCI, which convert neuronal electrical signals (carried by ions) into general electrical signals (carried by electrons). They can record or interfere with the state of neural activity. The Utah Electrode Array (UEA) designed by the University of Utah is a mainstream neural electrode fabricated by bulk micromachining. Its unique three-dimensional needle-like structure enables each electrode to obtain high spatiotemporal resolution and good insulation between each other. After implantation, the tip of each electrode affects only a small group of neurons around it even allowing to record the action potential of a single neuron. The availability of a large number of electrodes, high quality of signals, and long service life has made UEA the first choice for collecting neuronal signals. Moreover, UEA is the only implantable neural electrode that can record signals in the human cerebral cortex. This article mainly serves as an introduction to the construction, manufacturing process, and functioning of UEA, with a focus on the research progress in fabricating high-density electrode arrays, wireless neural interfaces, and optrode arrays using silicon, glass, and metal as that material of construction. We also discuss the surface modification techniques that can be used to reduce the electrode impedance, minimize the rejection by brain tissue, and improve the corrosion resistance of the electrode. In addition, we summarize the clinical applications where patients can control external devices and get sensory feedback by implanting UEA. Furthermore, we discuss the challenges faced by existing electrodes such as the difficulty in increasing electrode density, poor response of integrated wireless neural interface, and the problems of biocompatibility. To achieve stability and durability of the electrode, advancements in both material science and manufacturing technology are required. We hope that this review can broaden the scope of ideas for the development of UEA. The realization of a fully implantable neural microsystem can contribute to an improved understanding of the functional mechanisms of the neural network and treatment of neurological diseases.     

硝酸根接枝诱导组装金红石相TiO2纳米束以增强光催化产氢（英文）

化石燃料的快速消耗加速了全球能源危机和环境污染等问题.光催化产氢直接利用清洁和可持续的太阳能实现向化学燃料的转化,因而成为一种有前景的技术.众多半导体光催化剂中,二氧化钛因其高光催化活性、稳定的化学性质、低成本和无毒等优势而被广泛用作分解水产氢的光催化剂.最近,金红石相TiO2纳米晶体在某些情况下被证明具有光催化的潜力,然而其光生电子-空穴对的快速复合显著抑制了光催化效率.表面修饰、构建异质结和负载助催化剂等策略被用来提高光生载流子的分离效率以减少复合损失,从而提升光催化活性.由于光催化反应通常发生在光催化剂的表面活性位点上,因此通过改善表面性质改变电荷转移途径对光催化活性具有重要影响.磷酸、硫酸、硼酸和盐酸等无机酸的修饰可以改变光催化剂的表面基团,分别通过促进表面羟基的形成和氧气的吸附以及改变表面电荷性质更有效地捕获空穴,实现光生电子和空穴的分离,有助于光催化降解有机污染物.然而,这种影响机制显然不适用于光催化产氢体系,目前对无机酸修饰用于分解水产氢的研究鲜有报道.因此,通过酸改性策略制备高效产氢的光催化剂仍然是一个相当大的挑战.本文利用硝酸诱导策略合成纺锤状金红石相二氧化钛纳米束(R-TiO2).首先,制备层状质子化钛酸盐(LPT)作为TiO2的前体,随后,加入浓硝酸以诱导向金红石相TiO2的转变,并组装形成纺锤状纳米束.对照实验显示,硝酸的酸化可以诱导LPT向金红石相TiO2的转变,而相同条件下浓硝酸后处理不会引起晶相的转变.纺锤形纳米束的形成源于,硝酸诱导R-TiO2沿(110)方向生长并彼此粘附,硝酸诱导组装过程成功在TiO2表面修饰上硝酸根,同时扩大了光吸收范围,有效减少了电荷复合损失.光催化产氢测试证明了R-TiO2光催化剂具有高效的产氢性能,产氢速率为402.4μmol h-1,是Degussa P25的3.1倍,并且显著高于未经浓硝酸处理的锐钛矿(52.0μmol h^-1)或金红石相(110.8μmol h^-1)光催化剂.为了说明表面硝酸根的影响,分别从晶体和化学结构、形态以及表面电荷性质方面比较了光催化反应前后的变化,结果表明,R-TiO2增强的光催化效率可归因于硝酸根基团的负场效应,有利于在表面上捕获带正电的质子以促进载流子分离,提高光催化产氢的效率.总之,本工作不仅对于发展表面修饰策略制备高效产氢光催化剂的研究具有重要意义,而且提出了一种不同于文献报道的无机酸影响机制.     

An overview of synthetic modification of nitrile group in polymers and applications

The physicochemical properties of polymers are mainly dependent on the nature of polymer backbone and/or pendant groups linked to the main chain. Therefore, synthetic modification of these functional groups via post functionalization is an important approach for obtaining novel polymeric systems with improved properties and targeted applications. In this context, the synthetic modifications of nitrile group in polymers into various useful functionalities have received considerable attention and several interesting applications of the resulting polymers have been identified. The majority of the studies are based on Polyacrylonitrile (PAN), and some isolated examples of nitrile functionalization in copolymers such as Poly (Styrene-co-Acrylonitrile) (SAN), Poly (Acrylonitrile-co-Butadiene-co-Styrene (ABS) and Nitrile Rubber (NBR) are available. These synthetic modifications are mainly accomplished by the reactions such as Nucleophilic addition, cycloaddition, reduction, and hydrolysis using various reagents. These studies describing the post-polymerization modifications of nitrile group in polymers reported during the last three decades are covered in this review.     

Novel advances in metal-based solar absorber for photothermal vapor generation

Access to safe drinking water has become an extremely urgent research topic worldwide. In recent years, the technology of solar vapor generation has been extensively explored as a potential and effective strategy of transforming elements content in seawater. In this review, the basic concepts and theories of metal-based photothermal vapor generation device (PVGD) with excellent optical and thermal regulatory are introduced. In the view of optical regulation, how to achieve high-efficiency localized evaporation in different evaporation system (i.e., volumetric solar heating and interface solar heating) is discussed; from the aspect of thermal regulation, the importance of selective absorption surface for interfacial PVGD is analyzed. Based on the above discussion and analysis, we summarize the challenges of metal-based desalination device.