Mechanism Study on Nanoparticle Negative Surface Charge Modification by Ascorbyl Palmitate and Its Improvement of Tumor Targeting Ability

Surface charge polarity and density influence the immune clearance and cellular uptake of intravenously administered lipid nanoparticles (LNPs), thus determining the efficiency of their delivery to the target. Here, we modified the surface charge with ascorbyl palmitate (AsP) used as a negatively charged lipid. AsP-PC-LNPs were prepared by dispersion and ultrasonication of AsP and phosphatidylcholine (PC) composite films at various ratios. AsP inserted into the PC film with its polar head outward. The pK_a for AsP was 4.34, and its ion form conferred the LNPs with negative surface charge. Zeta potentials were correlated with the amount and distribution of AsP on the LNPs surface. DSC, Raman and FTIR spectra, and molecular dynamics simulations disclosed that AsP distributed homogeneously in PC at 1–8% (w/w), and there were strong hydrogen bonds between the polar heads of AsP and PC (PO²⁻), which favored LNPs’ stability. But at AsP:PC > 8% (w/w), the excessive AsP changed the interaction modes between AsP and PC. The AsP–PC composite films became inhomogeneous, and their phase transition behaviors and Raman and FTIR spectra were altered. Our results clarified the mechanism of surface charge modification by AsP and provided a rational use of AsP as a charged lipid to modify LNP surface properties in targeted drug delivery systems. Furthermore, AsP–PC composites were used as phospholipid-based biological membranes to prepare paclitaxel-loaded LNPs, which had stable surface negative charge, better tumor targeting and tumor inhibitory effects.     

台风对沿海地区气溶胶光学特性的影响分析

利用CE317太阳辐射计对2005年第19号台风登陆前后期问(9月29 H至10月6日)进行观测实验,采用Langley法分析台风对中国大陆沿海地区气溶胶光学特性的影响.指出台风过后气溶胶光学特性明显发生改变,气溶胶大粒子数增多,小粒子数减小.气溶胶光学厚度、Angstr(o)m波长指数α和大气混浊度系数β为测量期间最低分别为0.132(550 nm处),0.861和0.079.同时利用实验期间APS3321空气动力学粒度仪分析的气溶胶单位体积数粗细质粒所占比重、气溶胶粒子尺度谱分布和实测的日际气溶胶粒子数浓度对实验分析结果.α,β进行对比,发现它们之间的一致性很好.     

垃圾填埋渗滤液溶解性有机物组分的光谱学特性研究

选取3个不同填埋年限的渗滤液样品,以Leenheer的分组方法为基础,采用XAD-8树脂将渗滤液中的溶解性有机物(DOM)按极性和电荷特性分为结构较为均一的不同组分,用荧光光谱和紫外光谱对其中3个组分进行分析。荧光光谱分析表明,填埋初期,疏水酸性组分(HOA)、疏水中性组分(HON)和亲水性组分(HIM)均以类蛋白物质为主,随着填埋年限增加,其分子复杂化程度增强;其中HOA组分分子量最大、复杂程度最高,同时芳烃化合物的含量也最高,HON居中,HIM组分最小。紫外光谱分析表明,HOA和HON组分芳香环上的取代基均以羰基、羧基、羟基为主;而HIM组分则以脂肪链为主,同时芳香烃化合物含量较低。研究结果表明,随着填埋年限的增加,三种组分的复杂化程度均呈上升趋势。     

不同类型细胞穿膜肽二级结构特征研究

细胞穿膜肽是一类能以受体依赖或非受体依赖方式介导胞吞作用的小分子短肽,能够携带不同分子穿过细胞膜,这一特性使细胞穿膜肽成为一种有效的运输载体,为药物靶向治疗提供了新希望.本文从生物信息角度针对不同长度区间、运输不同类型分子细胞穿膜肽之间的异同二级结构特征进行了系统研究,同时进一步对不同穿膜方式对应的细胞穿膜肽二级结构特征进行了对比研究,结果表明不同类型细胞穿膜肽之间在二级结构组成上具有不同程度差异特征,为今后揭示细胞穿膜肽相关分子结构机制奠定可靠的理论基础.     

一类非线性发展方程的特征中心差分法

给出一类非线性发展方程的特征中心差分法,分别得到非规则网格上的位移u、速度u_t及其对空间变量x的一阶导数项的差分解和误差估计.所讨论方法的计算量与基于线性插值的特征差分法相当,其近似解与基于二次插值的特征差分法的近似解具有相同阶的误差估计,u,u_t对空间变量x的一阶导数近似均具有超收敛误差估计.数值试验说明了该方法的可行性和有效性.     

彩色负片印片颗粒指数的准确测定

分析了彩色负片印片颗粒指数σper实际测试中不同性能负片的测试特点和影响因素。印片颗粒指数的测试点应根据彩色负片的感光特性确定,为正常扩印时对应正片0．74中灰密度的负片密度点。影响印片颗粒指数值的两个主要因素是彩色相纸的反差修正系数α和彩色负片的覆盖力系数ECP;建立了α和ECP的实验求取方法,并通过对几种负片参量的实际测定,分析和说明了参量变化对印片颗粒指数数值的影响程度和应进行的修正。     

Studies on adhesion characteristics and corrosion behaviour of vinyltriethoxysilane/epoxy coating protective system on aluminium

The corrosion stability of vinyltriethoxysilane/epoxy coating protective system on aluminium is strongly related to the strength of bonds forming at the metal/organic coating interface. This article is a study of adhesion, composition, electrochemical and transport properties of epoxy coatings electrodeposited on bare aluminium and aluminium pretreated by vinyltriethoxysilane (VTES) during exposure to 3% NaCl. The VTES film was deposited on aluminium surface from 2% vinyltriethoxysilane solution during 30 s. From the values of adhesion strength (pull-off test), time dependence of pore resistance and coating capacitance of epoxy coating (impedance measurements) and diffusion coefficient of water through epoxy coating (gravimetric liquid sorption measurements), the influence of VTES sublayer on the corrosion stability of the electrodeposited epoxy coating was shown.The work discusses the role of the VTES pretreatment in the enhanced adhesion and corrosion stability of epoxy cataphoretic coating. The electrochemical results showed that the aluminium pretreatment by VTES film improved barrier properties of epoxy coating (greater pore resistance and lower coating capacitance). The lower value of diffusion coefficient of water through epoxy coating indicates the lower porosity, while the smaller adhesion reduction points to better adhesion of epoxy coating on aluminium pretreated by VTES film. The composition of the deposited coatings investigated by XPS enabled the clarification of the bonding mechanism.     

多节摆的自由振动分析

利用拉格朗日方程,导出了多节摆系统的运动微分方程.根据三对角阵的性质,给出了振动系统的特征多项式和特征矢量的递推公式,并以三节摆为例,说明了结果的应用,用此方法验证了<力学与实践>2002年第24期<多自由度振动系统的简正坐标和简正振动模式>一文中的结果.     

用数字毫伏表测量RLC串联电路相频特性

在论述RLC串联谐振电路和并联谐振电路原理的基础上,提出用数字毫伏表测量RLC串联谐振电路相频特性曲线的方法,并将测量结果与传统示波器测量方法比较,分析误差产生的原因是由于电感器交流内阻的影响所致。     

基于1–10GHz空地链路信号的雨强监测方法可行性研究

空地链路上的微波信号受降雨影响, 会产生功率衰减和去极化效应. 基于这些物理特性, 本文提出利用1–10 GHz空地链路信号的降雨干扰项获取雨强的方法, 并开展了相关理论研究. 根据空地链路信号与雨滴复杂的相互作用, 研究了空地链路信号频率为1–10 GHz时, 雨强 (rain rate, R) 对衰减 (attenuation, A) 和交叉极化分辨率 (cross-polarization discrimination, XPD)的影响, 分别建立了A-R和XPD-R关系模型. 通过数值模拟, 分别分析了利用上述两个关系模型估测雨强的可行性, 并系统研究了不同频率、极化方式和仰角条件下的适用性. 研究结果表明, 对于水平极化或圆极化, 且频率较高的空地链路信号, 利用A-R关系反演强降雨具有理论上的可行性; 对于不同频率和极化方式的信号, XPD-R关系模型都可以用于反演雨强, 并且对于1–50 mm·h^-1范围内的雨强, XPD较为敏感; 不同仰角条件下, A-R和XPD-R 模型都适用. 在4–10 GHz时, 本文的XPD-R模型和国际电信联盟ITU-R中XPD预测模型的结果非常接近. 所得出的结论对于下一步开展相关的验证实验, 拓展卫星系统的气象应用, 实时估测降雨强度, 实现全球降雨观测具有重要的参考价值. 关键词： 空地链路信号 雨强 衰减特性 交叉极化分辨率(XPD)