Bis-substituted benzo-15-crown-5 ethers as ion carriers in potassium ion-selective electrodes

Lipophilic bis-substituted ester and ether derivatives of benzo-15-crown-5 have been synthesised. The correlation between the structure and potentiometric ion-selectivity has been studied in PVC membrane ion-selective electrodes. An ion-selective potassium sensitive electrode based on 4,5-bis (biphenyloxymethyl)benzo-15-crown-5 exhibited the best electrode properties. The detection limit was loga _K = -5.4; logK _K,Na ^ppot = -3.5. The effect of the lipophilicity of neutral carriers upon electrode performance has been also discussed.     

Electron transfer reactions of cytochrome c at metal electrodes

The heterogeneous electron transfer reactions of cytochromec occurring at platinum, gold and mercury electrodes are shown to be quasi-reversible. In each case the electrodes have not been modified and the cytochromec samples are native. This work extends previous work and demonstrates that biological molecule electron transfer reactions can be studied at clean metal surfaces to gain fundamental knowledge of the mechanisms of these reactions.     

Spectroelectrochemical Measurements at Colloidal Au Multilayer Optically Transparent Electrodes

Application of thin colloidal Au multilayers on glass substrates as optically transparent electrodes is reported herein. Evaluation of the electrode by scanning electron microscopy and as an optically transparent thin layer electrode (OTTLE) illustrate its use for spectroelectrochemical applications. A spectroelectrochemical Nernst plot acquired for the oxidation of o‐tolidine yielded a value of E°=0.605 V (vs. Ag/AgCl) and n=1.88. Both of these values are in excellent agreement with previously published values obtained using a traditional Au minigrid OTTLE. The colloidal Au multilayer electrode is expected to offer many advantages over the minigrid OTTLE in specific applications. These advantages include direct control over microscopic surface topography, large electrochemical surface area, applicability to many different electrode geometries, and increased microscopic surface roughness for SERS and SPR applications.     

Development of an Amperometric Sensor Highly Selective For Dopamine and Analogous Compounds Determination Using Bis(2,2′‐Bipyridil) Copper(II) Chloride Complex

The use of [Cu(bipy)₂]Cl₂?6H₂O as a biomimetic catalyst in the construction of an amperometric sensor for dopamine determination is reported. The sensor was prepared modifying a glassy carbon electrode with a Nafion membrane doped with [Cu(bipy)₂]Cl₂?6H₂O complex. The sensor presented a higher response in 0.25 mol L^?1 phosphate buffer solution (pH 7.0), with an applied potential of ?50 mV (vs. SCE). In the optimized operational conditions, a linear response range between 35 and 240 μmol L^?1, with a sensitivity of 2.02±0.07 nA l μmoL^?1 cm^?2 and detection limit of 8.0 μmol L^?1 were typically observed for the sensor. The response time presented for this sensor was 0.5 s, presenting the same response for at least 40 successive measurements, with good repeatability (3.0%) expressed as relative standard deviation for n=6. The difference of the response between four sensor preparations was 4%. A detailed investigation about the sensor response for other sixteen phenolic compounds and interfering species were carried out. The sensor was applied in the determination of dopamine in pharmaceutical preparation with success.     

Amperometric detection of nitrite and nitrate at tetraruthenated porphyrin-modified electrodes in a continuous-flow assembly

The modification of a glassy carbon surface by coating with an electrostatically assembled film of tetraruthenated cobalt porphyrin/(meso-tetra(4-sulphonatephenyl)porphyrinate zinc(II) yields an indicator electrode that allows the determination of nitrite to be performed with a limit of detection of 0.1 μM in a flow injection configuration. The dynamic range extends up to 1000 μM and the repeatability of the measurements was evaluated to be 1.5% with a throughput of 50 samples per hour. The efficiency of the bilayered film to mediate the electron transfer allows the determinations to be performed at a less positive potential (+0.75 V) with enhanced sensitivity. The coating also prevents the surface poisoning and its stability is maintained over several weeks. The same detector was used for determination of nitrate after reduction to nitrite in a reductor column containing copperised cadmium. This method was used for the determination of nitrate and nitrite in mineral water, saliva and cured meats, the results being in agreement with certified values and those obtained by using recommended procedures.     

二硫代氨基甲酸螯合树脂化学修饰电极的制备及银离子的测定

将纯石墨电极经三氧化二铝抛光与浓硝酸和浓硫酸(1+1)混合酸使其极性化,之后于1 g·L-1聚氯乙烯(PVC)环己酮溶液10μL中浸渍片刻,取出,用红外灯照射烘干30 min,冷却后,将电极置于含有哌嗪、K3PO4及二甲基甲酰胺(DMF)(2:1:8)的混合液中使其反应;最后在氢氧化钠存在下与二硫化碳反应,用水洗至中性,即制成修饰有二硫代氨基甲酸螯合树脂的石墨电极,将其用于银的测定。与未修饰的电极相比此电极具有较高的灵敏度和较好的选择性,在1．0×10-8～1．0×10-5mol·L-1范围内,峰电流与浓度呈线性关系,检出限为5．0×10-9mol·L-1。     

Mediated amperometric biosensor for hypoxanthine based on a hydroxymethylferrocene-modified carbon paste electrode

An amperometric enzyme electrode for the determination of hypoxanthine in fish meat is described. The hypoxanthine sensor was prepared from xanthine oxidase immobilized by covalent binding to cellulose triacetate and a carbon paste electrode containing hydroxymethylferrocene. The xanthine oxidase membrane was retained behind a dialysis membrane at a carbon paste electrode. The sensor showed a current response to hypoxanthine due to the bioelectrocatalytic oxidation of hypoxanthine, in which hydroxymethyiferrocene served as an electron-transfer mediator. The limit of detection is 6 × 10^?7 M, the relative standard deviation is 2.8% (n=28) and the response is linear up to 7 × 10^?4 M. The sensor responded rapidly to a low hypoxanthine concentration (7 × 10^?4 M), the steady-state current response being achieved in less than 1 min, and was stable for more than 30 days at 5 ° C. Results for tuna samples showed good agreement with the value determined by the conventional method.     

A Siloxane Homopolymer with Interacting Ferrocenes as a New Material for the Preparation of Sensors Based on the Detection of Hydrogen Peroxide

The electrochemical characterization of a hydrogen peroxide sensor based on a ferrocene‐containing polymer electrochemically deposited onto a platinum electrode is described. The redox polymer consists of a siloxane‐based homopolymer, with pendant electronically communicated ferrocenyl moieties. The electrodes were used as the transducer for glucose and lactate‐sensing enzyme sensors. Amperometric biosensors were prepared by immobilization of glucose oxidase (Gox) or lactate oxidase (Lox) onto these modified electrodes. The steady‐state amperometric response of the sensors is investigated as a function of the applied potential and substrate concentration. Interferences, sensitivity and stability of the sensors were also studied.     

Activity coefficients of electrolytes from the E.M.F. of liquid membrane cells. II - multicharged electrolyte solutions

The activity coefficients of Co(en)₃Cl₃ and K₂SO₄ were measured by means of a cell with ion-exchange liquid membranes following the method described in paper I. The results prove that this method is even more valuable with multicharged salts than with 1-1 electrolytes. The values obtained are precise and reliable down to dilution limits never before accessible, e.g., 4×10^–5 mol-kg^–1 in Co(en)₃Cl₃. High dilution levels are of particular importance when dealing with highly charged electrolytes since the trend at higher concentrations often leads to errors both in extrapolation to infinite dilution and in the absolute activity coefficients. As an application, the activity coefficients of [Co(en)₃]₂(SO₄)₃-suspected to be wrongly evaluated in past literature-were measured, and their values at low concentrations were actually lower than those quoted before.     

Chemical species produced in the reaction between ethanedial (glyoxal) and 5-amino-1,10-phenanthroline and their iron(II) complexes: preparation and some spectrometric studies

Chemical species obtained by reaction of 5-amino-1, 10-phenanthroline with ethanedial (glyoxal) are reported with regard to their preparation, chemical composition and spectrometric characterization (UV-visible, infrared and liquid secondary ion mass spectrometry). Products of the reaction are postulated to be a mixture of species with molecular weights of 339, 371,480 and 524 u. Chemical reactions leading to these products and possible structural formulas for each of these species are presented. The iron complexes of these ligands, because of their extremely low solubility in most solvents, find application as redox mediators when incorporated in carbon paste electrodes, particularly for sensing in continuous-flow systems.