Palladium supported on urea-containing porous organic polymers as heterogeneous catalysts for C–C cross coupling reactions and reduction of nitroarenes

The novel palladium nanoparticles (Pd@POPs) were successfully prepared with controllable sizes and dispersity through the introduction of H₂PdCl₄ into urea-linked porous organic polymers (POPs) in an aqueous environment followed by reducing Pd(II) to Pd(0) by NaBH₄. The newly prepared Pd@POPs were thoroughly characterized by FT-IR, ICP-AES, BET, XRD, SEM and TEM. Furthermore, the catalytic reactivities of this novel Pd@POPs were investigated via Heck, Suzuki-Miyaura cross-coupling reaction and nitroarene reduction, and they exhibited superior catalytic performances in all these three reactions, producing the corresponding products in up to quantitative yields. Additionally, the Pd@POPs had excellent recyclability in both Heck and Suzuki-Miyaura cross-coupling reactions with the repeating time up to four times and ten times, respectively, along with no obvious decrease of catalytic reactivities.     

The heterogeneous distribution of the liquid phase in partially filled porous glasses and its effect on self-diffusion

The spatial distribution of the liquid phase in a typical, partially filled, porous glass (VitraPor #5) has been examined with the aid of magnetic resonance microscopy and field gradient nuclear magnetic resonance diffusometry techniques. The correlation length of the material turned out to be long enough to permit the visualization of the microscopic heterogeneity of the material by magnetic resonance imaging. Contrasts are dominated by transverse relaxation depending on local filling degree, which in turn depends on local microstructure. The bimodal heterogeneity of the latter was also visualized by scanning electron microscopy. The effect of heterogeneity on an effective diffusion coefficient has been examined for polar (water) and nonpolar (cyclohexane) molecules.     

Facile synthesis of palladium nanoparticles supported on urea-based porous organic polymers and its catalytic properties in Suzuki-Miyaura coupling

By using urea linked porous organic polymers as template, a new nano palladium catalyst with low Pd loading can be easily prepared (1.0 wt% Pd only). Although such less amount of Pd was contained in this new catalyst, it is still an effective catalyst for the Suzuki-Miyaura coupling of aryl iodines and aryl boric acids, affording biphenyl products in excellent yields with outstandingly enhanced turnover numbers (up to 10,536) under green solvent (water).     

Theoretical investigation on submicron particle penetration through circular tubes inside a porous medium

The analytical infinite series solution of submicron particle transport in a circular tube bounded by a porous wall, such as a pinhole, is determined under the slip velocity boundary condition, and the solution is verified by using the experimental data in the previous studies for the specific cases. The results show that particle penetration rate increases with the increase of the porous parameter, the axial pressure drop, and the pinhole radius, whereas it decreases with increasing the pinhole length. The penetration rate of nano-particles are more sensitive to the variation of these parameters. However, the differences between the penetrations of particles ranging from 0.3 μm to 1 μm are not evident because the diffusion becomes weak gradually in this size range. In addition, a further comparison is performed between the analytical solution and the existing studies, and approximate expressions are presented for accurate calculation of particle penetration rate through pinholes appearing in porous materials including filter devices and masks.     

170 Mb/s multilevel transmission over 115 m standard step-index plastic optical fiber using an integrated optical receiver

An optical receiver having a high linearity is used for multilevel communication over standard step plastic optical fiber. A large-diameter photodiode with an antireflection coating optimized for red light was integrated. These features enable the used optical receiver to be a promising plastic optical fiber receiver. An error free (< 10⁻⁸) 170 Mb/s data rate over 115 m standard PMMA step-index plastic optical fiber is achieved with four-level and eight-level pulse amplitude modulation.     

Multilayer dielectric cylindrical mirrors based on omnidirectional reflection from a one-dimensional photonic crystal

A multilayer dielectric cylindrical mirror (MDCM) based on the one-dimensional omnidirectional reflection of a photonic crystal is presented. In this case, the refractive indices of the two materials are 1.6 (polystyrene) and 4.6 (tellurium), and the corresponding optimized thicknesses are 0.75a and 0.25a. A very high reflectance over a wide frequency range is observed. In this case, a is the lattice constant of the photonic crystal. In this band, the MDCM has good reflection and focal properties. Therefore, it is feasible to use the MDCM for integrated waveguide devices. As an example, an etched diffraction grating demultiplexer based on the MDCM is also proposed. Both the operational principle and design of the device are introduced. This provides a method for designing compact integrated waveguide devices.     

Comparison of confinement characters between porous silicon and silicon nanowires

Confinement character and its effects on photoluminescence (PL) properties are theoretically investigated and compared between porous silicon (p-Si) and silicon nanowires (Si-NWs). The method is based on the application of the tight-binding technique using the minimal sp³-basis set, including the second-nearest-neighbor interactions. The results show that the quantum confinement (QC) is not entirely controlled by the porosity, rather it is mainly affected by the average distance between pores (d). The p-Si is found to exhibit weaker confinement character than Si-NWs. The confinement energy of charge carriers decays against d exponentially for p-Si and via a power-law for Si-NWs. This latter type of QC is much stronger and is somewhat similar to the case of a single particle in a quantum box. The excellent fit to the PL data demonstrates that the experimental samples of p-Si do exhibit strong QC character and thus reveals the possibility of silicon clustering into nano-crystals and/or nanowires. Furthermore, the results show that the passivation of the surface dangling bonds by the hydrogen atoms plays an essential role in preventing the appearance of gap states and consequently enhances the optical qualities of the produced structures. The oscillator strength (OS) is found to increase exponentially with energy in Si-NWs confirming the strong confinement character of carriers. Our theoretical findings suggest the existence of Si nanocrystals (Si-NCs) of sizes 1-3 nm and/or Si-NWs of cross-sectional sizes in the 1-3 nm range inside the experimental p-Si samples. The experimentally-observed strong photoluminescence from p-Si should be in favor of an exhibition of 3D-confinement character. The favorable comparison of our theoretical results with the experimental data consolidates our above claims.     

A perturbation solution for bacterial growth and bioremediation in a porous medium with bio-clogging

We investigate a flow problem of relevance in bioremediation and develop a mathematical model for transport of contamination by groundwater and the spreading, confinement, and remediation of chemical waste. The model is based on the fluid mass and momentum balance equations and simultaneous transport and consumption of the pollutant (hydrocarbon) and nutrient (oxygen). Particular emphasis is placed on the study of processes involving the full coupling of reaction, transport and mechanical effects. Dimensional analysis and asymptotic reduction are used to simplify the governing equations, which are then solved numerically.     

Modal analysis of piezoelectric bodies with voids. II. Finite element simulation

The paper is concerned with the eigenvalue problems for piezoelectric bodies with voids in contact with massive rigid plane punches and coved by the system of open-circuited and short-circuited electrodes. The linear theory of piezoelectric materials with voids for porosity change properties according to Cowin–Nunziato model is used. The generalized statements for eigenvalue problem are obtained in the extended and reduced forms. A variational principle is constructed which has the properties of minimality, similar to the well-known variational principle for problems with pure elastic media. The discreteness of the spectrum and completeness of the eigenfunctions are proved. The orthogonality relations for eigenvectors are obtained in different forms. As a consequence of variational principles, the properties of an increase or a decrease in the natural frequencies, when the mechanical, electric and “porous” boundary conditions and the moduli of piezoelectric solid with voids change, are established.