Organic acid solutions in the chromatography of inorganic ions VIII. Cation-exchange of Mn(II), Cd(II), Co(II), Ni(II), Zn(II), Cu(II), Fe(III), Sc(III), Y(III), Eu(III), Dy(III), Ho(III), Yb(III), Ti(IV) and Nb(V) in malate media

Summary The cation-exchange behaviour of Mn(II), Cd(II), Co(II), Ni(II), Zn(II), Cu(II), Fe(III), Sc(III), Y(III), Eu(III), Dy(III), Ho(III), Yb(III), Ti(IV) and Nb(V) in malate media at various concentrations and pH, was studied with Dowex 50 WX8 resin (200–400 mesh) in the ammonium form. Separation of Fe(III)/Cu(II), Fe(III)/Cu(II)/Zn(II), Fe(III)/Co(II)/Mn(II), Cu(II)/Ni(II)/Mn(II), Fe(III)/Cu(II)/Co(II)/Mn(II), Fe(III)/Cu(II)/Ni(II)/Cd(II), Yb(III)/Eu(III), Sc(III)/Y(III),Sc(III)/Yb(III)/Dy(III) and Nb(V)/Yb(III)/Ho(III) has been achieved, among others.This work was supported by C.N.R. of Italy.     

Nonlinear Current-Voltage Curves for Thin-Film Gas-Sensitive Structures

Current-voltage curves for sensor structures based on thin tin oxide films are examined in various gases. Conditions favoring symmetrical nonlinear curves in the voltage range −30 to 30 V are found.__________Translated from Elektrokhimiya, Vol. 41, No. 6, 2005, pp. 735–737.Original Russian Text Copyright © 2005 by Simakov.Published on the basis of a report delivered at the VII Meeting on Fundamental Problems in Solid-State Ionics (Chernogolovka-2004).     

Etude du Systeme Ternaire Se-Te-Sn

This work is a part of the systematic study of the ternary based chalcogenides systems. The aim is to determine the phase equilibrium, and to determine the limits of the phase area. This is done in view to perfecting knowledge of elaboration conditions for new materials and to study of their physical properties. Few works have been devoted to the study of the ternary system Se-Te-Sn, only the cross section SnSe-SnTe has been studied [1] and [2]. The experimental study by DTA, DSC and X-ray diffraction on powder performed at room temperature, exhibits a miscibility gap in the liquid state which narrows as it goes through the Sn-Se binary system. Three cross sections behave as ‘quasi-binary‘ system and six ternary invariants have been exhibited: three ternary eutectics and three ternary quasi-peritectics. This revised version was published online in July 2006 with corrections to the Cover Date.     

Cationic copolymerization of indene with styrene derivatives: Synthesis of random copolymers of indene with high molecular weight

Random copolymers with high molecular weights of indene and p‐methylstyrene (pMeSt) were synthesized by cationic polymerization with trichloroacetic acid/tin tetrachloride in CH₂Cl₂ at low temperatures. When indene and pMeSt (1:1 v/v), for example, were polymerized at ?40 °C, both monomers were consumed at very similar rates to give a copolymer with high molecular weight [number‐average molecular weight (M_n): 8–9 × 10⁴]. This is indeed quite unexpected behavior for the combination of these two monomers because pMeSt polymerized over 1000 times faster than indene in the homopolymerization under the reaction conditions previously described. The product copolymer of indene and pMeSt had a random monomer sequence in it that was confirmed by NMR analyses and thermal‐property measurements. In sharp contrast with pMeSt, styrene and p‐chlorostyrene, which have no electron‐donating groups on the phenyl ring, led to low molecular weight polymers (M_n < 10,000) in the copolymerization with indene (1:1 v/v). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2449–2457, 2002     

Structure refinement and chemical analysis of Cs3Li(DSO4)4, formerly ‘Cs1.5Li1.5D(SO4)2’

An accurate structure refinement of the deuterated analog of the cesium lithium acid sulfate, formerly identified as ‘Cs_1.5Li_1.5H(SO₄)₂’, has been carried out using neutron diffraction methods. Like the protonated material reported earlier (Merinov et al., Solid State Ionics 69 (1994) 53), the compound is cubic, , however, the correct stoichiometry is Cs₃Li(DSO₄)₄. There are four formula units per unit cell and six atoms in the asymmetric unit. The lattice constant measured in this work is a=11.743(2) Å, comparable to the earlier results. The structure contains one disordered hydrogen bond, formed between O(2) atoms and located on two of the edges of the single LiO₄ tetrahedron. The Li site occupancy is , as is that of the deuterium site. This level of site occupancies is consistent with a structure in which hydrogen bonds are formed only when the lithium site is unoccupied, and explains the otherwise close proximity of the Li and D atoms, 1.394(10) Å. This unusual structural feature furthermore leads to a fixed stoichiometry, as confirmed here by chemical analysis of both the deuterated and protonated materials, despite the partial occupancy of the lithium and deuterium (hydrogen) atom sites.     

锂离子电池锡氧化物基负极材料的湿化学合成与电化学性质

采用新兴的湿化学方法合成了锡氧化物基粉末材料。用X-射线衍射、扫描电镜和电化学方法对材料的微观结构、形貌和电化学性能进行了详细的研究。结果表明，经400 ℃热处理4 h的锡氧化物基材料的颗粒大小均匀，平均粒径约为200 nm。这种材料的可逆充电容量超过570 mAh·g^-1，30次循环后平均每次循环的容量衰减只有0.15%。良好的电化学性能表明锡氧化物基材料有望作为新一代锂离子电池的负极材料。     

Solidification of metallic tin in dispersed phase

Differential scanning calorimetry (DSC) and particle size measurements were carried out on disproportionation products of pure SnO to investigate the fusion and solidification behaviour of Sn droplets and their catalytic nucleation on Sn oxides. If disproportionation reaction takes place at T ≥ 798 K, the products are metallic Sn and SnO₂; but for 523 < T < 798 K, SnO₂ is replaced by an intermediate oxide (IO) Sn_xO_(1+x). On melting, samples with IO show a drop of melting point of metallic tin due to Gibbs–Thomson effect; no lowering of melting point was observed in samples with SnO₂. On the other hand, if solidification occurs in the presence of IO, Tin droplets always displayed three distinct exothermic solidification peaks, but if it takes place in the presence of SnO₂, only one exothermic peak is observed. Undercooling values and contact angles were determined for each of the heterogeneous nucleation processes. The different behaviour of metallic Tin droplets was related to the different lattice symmetry of SnO₂ and IO, which act as nucleation catalysts.     

Greater insight into the MTDSC technique involving fundamental sinusoidal heat flow equations

Summary Modulated temperature DSC was investigated, comparing data found experimentally to that derived from theory. Deviation from theory was found with regard to the amplitude of the modulated heat flow signal when large modulation amplitudes were employed in the experiment. These deviations were determined to be dependent on the absolute temperature and it was concluded that further investigation of the heat flow signal obtained during MTDSC experiments is required.     

二硫化锡基钠离子电池负极材料的研究进展

二硫化锡由于其理论容量高、氧化还原电位合适，而成为钠离子电池负极材料的研究热点之一。从纯二硫化锡、二硫化锡/碳复合物和二硫化锡/石墨烯复合物等3个方面对二硫化锡负极材料在近5年的发展进行了概述。     

Gold nanoparticle arrays directly grown on nanostructured indium tin oxide electrodes: Characterization and electroanalytical application

This work describes an improved seed-mediated growth approach for the direct attachment and growth of mono-dispersed gold nanoparticles on nanostructured indium tin oxide (ITO) surfaces. It was demonstrated that, when the seeding procedure of our previously reported seed-mediated growth process on an ITO surface was modified, the density of gold nanospheres directly grown on the surface could be highly improved, while the emergence of nanorods was restrained. By field emission scanning electron microscopy (FE-SEM) and cyclic voltammetry, the growth of gold nanoparticles with increasing growth time on the defect sites of nanostructured ITO surface was monitored. Using a [Fe(CN)₆]³⁻/[Fe(CN)₆]⁴⁻ redox probe, the increasingly facile heterogeneous electron transfer kinetics resulting from the deposition and growth of gold nanoparticle arrays was observed. The as-prepared gold nanoparticle arrays exhibited high catalytic activity toward the electrooxidation of nitric oxide, which could provide electroanalytical application for nitric oxide sensing.