Influence of some inorganic salts on the polarity of apolar polymer phases in capillary gas chromatography

Different stationary phases were prepared by mixing a series of inorganic salts with dimethylsiloxane polymer (SE-30) and then tested by capillary gas chromatography. It was demonstrated that the polarity (as evaluated by measurement of Rohrschneider constants) of the mixed stationary phases, which is inferior or equal to that of a medium-polar OV-25 phases, reached even lower values than SE-30 alone. The influence of NaF, NaCl, NaBr, AgNO₃, and other inorganic salts on the polarity of capillaries is reflected by a better resolution and shorter retention time of cis/trans isomers of fatty acid methyl esters (FAMES) as well as positional isomers of triglycerides.     

Ester Elimination: A General Solvent Dependent Non-Hydrolytic Route to Metal and Mixed-Metal Oxides

Molecular routes to metal oxides has become an area of intensescientific interest due to the technological relevance of thesematerials. Molecular routes are proving important as a result ofthe possibility to control the physical and chemical propertiesof the final materials.We have chosen to study non-hydrolytic methods, namely esterelimination reactions between two prototypical molecularprecursors metal alkoxides, M(OR)_n, and metal carboxylates, M(O₂CR)_n, to synthesize metal oxides: This method allows for the synthesis of pure metal oxides bycomplete elimination of the organic supporting ligands withconcomitant formation of M-O-M bridges.Furthermore, incomplete esterelimination can lead to isolation of molecular clusters asintermediates which can also be used as building blocks for theformation of metal oxides with controlled microstructure.Here we report a series of reactions between Sn and Si alkoxidesand carboxylates designed to gain further insight into thefactors governing ester elimination reactions. By choosingcompounds with varying coordination environments and stericaccessibility we have devised a set of criteria which shouldallow for successful ester elimination between metal alkoxide andcarboxylate compounds. Furthermore we have also shown theability of ester elimination derived molecular clusters withspecific microstructure to be used in the synthesis of bulkmaterials retaining the structural attributes of the precursor cluster.     

Coprecipitation with metal hydroxides for the determination of beryllium in seawater by graphite furnace atomic absorption spectrometry

Coprecipitation first with magnesium hydroxide, next with tin(IV) hydroxide is developed for the determination of traces of beryllium in sea-water. To a 200-ml sample is added a sodium hydroxide solution to form magnesium hydroxide at pH 11.5, on which beryllium is quantitatively coprecipitated. The precipitate is separated by centrifugation and dissolved in 2 ml of 12 mol/l hydrochloric acid. The resulting solution (ca. 10 ml) is mixed with 2 mg of tin (IV) carrier and the pH is adjusted to 5.0 to collect the beryllium on tin (IV) hydroxide, leaving magnesium ions in the solution. The tin (IV) hydroxide is centrifuged, dissolved in 0.1 ml of 5 mol/l hydrobromic acid, and then diluted to 1 ml with water. Magnesium is so added as to be 500 g/ml for increasing the sensitivity about four times, and the beryllium in the solution is determined by graphite furnace atomic absorption spectrometry. The experiments with synthetic seawater samples showed that pg — g amounts of beryllium can be coprecipitated on the metal hydroxides and beryllium at the low ng/1 level can be determined with reasonable precision (RSD < 10%). The detection limit of the proposed method is 0.5 ng/l of beryllium in seawater.     

Size-based analysis of incinerator fly ash using gravitational SPLITT fractionation, sedimentation field-flow fractionation, and inductively coupled plasma-atomic emission spectroscopy

Fly ash has been regarded as hazardous because of its high adsorption of toxic organic and/or inorganic pollutants. Fly ash is also known to have broad distributions of different chemical and physical properties, such as size and density. In this study, fly ash emitted from a solid waste incinerator was pre-fractionated into six sub-populations by use of gravitational SPLITT fractionation (GSF). The GSF fractions were then analyzed by sedimentation field-flow fractionation (SdFFF) and ICP–AES. SdFFF analysis showed the fly ash has a broad size distribution ranging from a few nanometers up to about 50 µm. SdFFF results were confirmed by electron microscopy. Inductively coupled plasma–atomic emission spectroscopy (ICP–AES) analysis of the GSF fractions showed the fly-ash particles contain a variety of inorganic elements including Ca, Si, Mg, Fe, and Pb. The most abundant in fly ash was Ca, followed by Si then Mg. No correlations were found between trace element concentration and particle size.     

三(邻氯苄基)氯化锡的合成、结构和量子化学研究

邻氯苄基氯与锡反应合成三(邻氯苄基)氯化锡，经x射线方法测定了新化合物 的晶体结构，化合物属三方晶系，空间群为R-3，晶体学参数：α=b=1．3583(4) mn，c=2．1147(8)am，v=3．3790(19)nm~3，Z=6，μ(Mo kα)=16．11cm~-1， r (000)：1572，R_1=O．0755；Sn-C键长分别为0．2148(13)和0．220(2)nm，Sn-C1 键为0．2528(15)和0．2477(13)Bill．中心锡原子与亚甲基碳和氯原子构成畸型四 面体．并对其结构进行量子化学从头计算，探讨化合物的稳定性、分子轨道能量、 原子净电荷布居规律以及一些前沿分子轨道的组成特征．     

Products of lithium interaction with nanostructured oxides SnO2-TiO2 and mechanism of charge-discharge of electrodes in a lithium-ion battery

Products of lithium interaction with thin-film nanostructured SnO₂-TiO₂ (ST) oxides are studied with the aid of x-ray diffraction analysis and Moessbauer spectroscopy on the ¹¹⁹Sn nuclei. Electrochemical properties of a series of the ST electrodes with different concentrations of TiO₂ varied from 0 to 20 mol % are also examined. It is concluded that the specific feature of the charge-discharge mechanism of the ST electrodes is a significant participation of oxygen in reversible reactions during insertion and extraction of lithium as compared with an alloying mechanism of operation of tin-containing anodes. The leading role in this is played by titanium oxide. Remaining stable towards reduction by lithium, it facilitates the holding of the neighboring layers of SnO₂ in a nanodisperse state and in an oxidized state. The effect of a decrease in the capacity degradation in modified TiO₂ electrodes, which is discovered in this work, is attributed to the hampering of the growth of nanocrystallites of β-Sn by interlayers of tin and titanium oxides mentioned above.     

Ion chromatographic separation of car☐ylic acids prediction of retention data

The retention behavior of biologically relevant monovalent (formic, acetic, propionic, lactic and pyruvic) and divalent (oxalic, malonic, succinic, fumaric, maleic and tartaric acids) car☐ylic acids together with inorganic analytes (chloride and sulphate) has been studied. The separation was performed on a latex-based strong anion-exchange resin using carbonate buffer systems in suppressed IC. The retention behaviour of analytes was investigated at different pH values and [HCO₃⁻]+[CO₃²⁻] concentrations. A theoretical model, involving ion-exchange equilibria of sample and eluent anions, was derived and applied to the chromatographic data obtained. Chromatographic ion exchange selectivity values were determined and retention data were calculated for the anions using different carbonate eluent conditions. The average of errors between the predicted and the measured retention volumes of the analytes studied does not exceed 4.0%. The study effectively characteristics the behaviour of different analytes under elution conditions of practical importance.     

CHARACTERIZATION AND CATALYTIC PERFORMANCE OF PLATINUM SUPPORTED ON Sn-MgAl_2O_4

IntroductionSupportedPt-Sncatalystsareimpo~inthepdrileumandpthechendcalindustricsbecauseoftheirsuperiorcatalyticperformances.Forexample,Pt-Snsupportedonaneutralsupporthasbeenreportedtoexhibithighdehydrogenationselectivityanddebilitythansupportedplatinumca…     

A multisite molecular mechanism for Baeyer-Villiger oxidations on solid catalysts using environmentally friendly H2O2 as oxidant

The molecular mechanism of the Baeyer-Villiger oxidation of cyclohexanone with hydrogen peroxide catalyzed by the Sn-beta zeolite has been investigated by combining molecular mechanics, quantum-chemical calculations, spectroscopic, and kinetic techniques. A theoretical study of the location of Sn in zeolite beta was performed by using atomistic force-field techniques to simulate the local environment of the active site. An interatomic potential for Sn/Si zeolites, which allows the simulation of zeolites containing Sn in a tetrahedral environment, has been developed by fitting it to the experimental properties of quartz and SnO2(rutile). The tin active site has been modeled by means of a Sn(OSiH3)3OH cluster, which includes a defect in the framework that provides the flexibility necessary for the interaction between the adsorbates and the Lewis acid center. Two possible reaction pathways have been considered in the computational study, one of them involving the activation of the cyclohexanone carbonyl group by Sn (1) and the other one involving hydrogen peroxide being activated through the formation of a tin-hydroperoxo intermediate (2). Both the quantum-chemical results and the kinetic study indicate that the reaction follows mechanism 1, and that the catalyst active site consists of two centers: the Lewis acid Sn atom to which cyclohexanone has to coordinate, and the oxygen atom of the Sn-OH group that interacts with H2O2 forming a hydrogen bond.     

Synthesis and electrochemical properties of Zn3V3O8 as novel anode material

Zn₃V₃O₈ two-dimensional micro sheets are successfully synthesized by combination of solvothermal method and heat treatment. The Zn₃V₃O₈ has better electrochemical performances after calcinations.