Comparison of side-on and end-on coordination of E2 ligands in complexes [W(CO)5E2] (E=N,P, As,Sb, Bi,Si-, Ge-, Sn-, Pb-)

Complexes of W(CO)(5) with neutral diatomic pnictogen ligands N(2), P(2), As(2), Sb(2), and Bi(2) and anionic Group 14 ligands Si(2) (2-), Ge(2) (2-), Sn(2) (2-), and Pb(2) (2-) coordinated in both side-on and end-on fashion have been optimized by using density functional theory at the BP86 level with valence sets of TZP quality. The calculated bond energies have been used to compare the preferential binding modes of each respective ligand. The results were interpreted by analyzing the nature of the interaction between the ligands and the metal fragment using an energy partitioning method. This yields quantitative information regarding the strength of covalent and electrostatic interactions between the metal and ligand, as well as the contributions by orbitals of different symmetry to the covalent bonding. Results show that all the ligands studied bind preferentially in a side-on coordination mode, with the exception of N(2), which prefers to coordinate in an end-on mode. The preference of the heavier homologues P(2)-Bi(2) for binding in a side-on mode over the end-on mode in the neutral complexes [(CO)(5)WE(2)] comes mainly from the much stronger electrostatic attraction in the former species. The energy difference between the side-on and end-on isomers of the negatively charged complexes with the ligands Si(2) (2-), Ge(2) (2-), Sn(2) (2-), and Pb(2) (2-) is much less and it cannot be ascribed to a particular bonding component.     

Thermodynamics of the decomposition processes of donor-acceptor complexes MX3 x en x MX3 and MX3 x en.

The structural and thermodynamic properties of the donor-acceptor (DA) complexes of Group 13 metal halides (MX3) with ethylenediamine and their decomposition products have been studied theoretically at the B3LYP/LANL2DZ(d,p) level of theory. Gas-phase dissociation into various components and HX elimination reactions are considered. Both processes are endothermic but favored by entropy. Complexes of 2:1 composition are predicted to be stable in the gas phase up to 640-1000 K. It is found that complexation with the second acceptor molecule lowers the HX elimination enthalpy; in turn, HX elimination increases DA bonding with a second MX3 molecule. Exceptionally high values of the dissociation enthalpies (310-390 kJ mol(-1)) and HX elimination reactions (360-420 kJ mol(-1)) of the amido compounds MX2NHC2H4NH2 and MX2NHC2H4NHMX2 make them important intermediates in the decomposition processes. Dissociation reactions of the complexes are more favorable than HX elimination reactions; however, the subsequent oligomerization and cyclization processes of coordinationally unsaturated amido and imido compounds may facilitate HX elimination. Since HI elimination reactions are predicted to be the least endothermic, and aluminum-containing compounds have the strongest M-N dissociation enthalpies, it is expected that compounds based on aluminum iodide are promising objects for experimental studies.     

Multiple Bonds between Transition Metals and “Bare” Main Group Elements: Links between Inorganic Solid State Chemistry and Organometallic Chemistry

The last two decades have seen a dramatic development in the study of metal-metal multiple bonds, particular successes being recorded in the field of organometallic chemistry. Syntheses designed to produce novel transition metal complexes with single, double, triple and quadruple metal-metal bonds occupy a most important place in such research, as also do reactivity studies. A striving to establish general principles has provided much of the motivation for such work, but one less obvious goal—the commercial application of the catalytic properties of metal-metal multiple bonding systems, in the medium and long term—should not be overlooked. All aspects of the investigations of metal-metal multiple bonds also apply to a particular class of compound that has, however, enjoyed little lime-light and thus deserves the present review: complexes with multiple bonds between transition metals and substituent-free (“bare”) main group elements. Although based mostly on accidental discoveries, the few noteworthy examples are now beginning to unfold general concepts of synthesis that are capable of being extended and thus are deserving of exploitation in preparative chemistry. The availability of further structural patterns exhibiting multiple bonds between transition metals and ligand-free main group elements might enable preparative organometallic chemistry to expand in a completely new direction (for instance by the stabilizing or activation of small molecules at the metal complex). This essay discusses the chemistry of complexes of bare carbon, nitrogen, and oxygen ligands (carbido-, nitrido-, and oxo-complexes) and their relationships to higher homologues from both a synthetic and a structural point of view.     

Determination of trace elements in ambient aerosol samples

A microwave-assisted digestion procedure using HNO₃, HF, and H₂O₂ has been developed for analysis of elements in ambient particulate matter (PM). The samples are collected on cellulose filters and analyzed by inductively coupled plasma mass spectrometry (ICP-MS). The ICP-MS is calibrated with external standards, and recovery of analytes is tested with NIST SRM 1648 Urban Dust. This method has been used to quantify the airborne concentrations of a large number of elements, including Ag, As, Ba, Be, Ca, Cd, Ce, Co, Cr, Cs, Cu, Fe, Ga, K, Li, Mg, Mn, Mo, Ni, Pb, Rb, Se, Sb, Sr, Ti, Tl, V, and Zn. For the majority of these elements, recovery of the NIST SRM is within 15% of the certified values.     

铜锌含量对肿瘤的诊断价值

探讨了血清、头发中Cu、Zn及Cu／Zn比值对肺癌、肝癌及胃肠道肿瘤的诊断价值，检测了171例样品，并与156名健康者进行对比研究．结果显示血清和头发Cu、Cu／Zn可作为恶性肿瘤的筛选指标，发Cu、Cu／Zn有助于肺癌临床分期，血清Cu有助于肝癌诊断和预示进展程度，而Cu／Zn可能对胃肠道肿瘤的诊断和预后更有用．     

Synthesis and electrochemical properties of Zn3V3O8 as novel anode material

Zn₃V₃O₈ two-dimensional micro sheets are successfully synthesized by combination of solvothermal method and heat treatment. The Zn₃V₃O₈ has better electrochemical performances after calcinations.     

用原子捕获技术提高火焰原子吸收光谱法的灵敏度

采用简易的石英原子捕获器，使Ｃｕ，Ａｇ，Ａｕ，Ｚｎ，Ｃｄ，Ｐｂ，Ｓｂ，Ｂｉ等易挥发元素在空气－乙炔火焰原子吸收光谱法中的灵敏度提高了３～５倍，并有较好的精密度，相对标准偏差在１％左右，方法中用此技术测定了标准物质中Ｐｂ、Ｃｄ的含量，获得了满意的结果，它较之石墨炉原子吸收光地具有快速，简便的特点，具有较大的实用价值。     

Determination of anionic trace impurities in glycerol by capillary isotachophoresis with enlarged sample load

Glycerol of different quality classifications served as a model for a neutral excess component in the isotachophoretic determination of low-molecular-mass anionic trace impurities. Potential anionic contaminants such as nitrate, sulphate, chlorate, nitrite, oxalate, fluoride formate and phosphate were analysed up to an analyte-to-excess ratio of 1:4·10⁷, thus providing the possibility of checking the sample for the mentioned analytes in the order of 2.5·10⁻⁶–9.5·10⁻⁶%. Because we used a column-coupling isotachophoretic instrument the electrolyte system consisted of two different leading electrolytes, one for the pre-separation (10 mmol/l HCl, β-alanine, pH 3.2) in the first capillary and one for the final separation (5 mmol/l HCl, 1,3-bis[tris(hydroxymethyl)methylamino]propane, β-alanine, pH 3.6) in the second capillary. The terminating electrolyte was citric acid. Due to an increased injection volume of 300 μl, limits of detection (LODs) in the nanomolar range were realised by conductivity detection. The developed method allows simultaneous analysis without sample preparation and/or preconcentration within 25 min and is for that reason suitable for in-place process control.     

高血压类风湿症疗效与锌,钙关系初探

以临床典型病案为例，探讨了中医中药传统理论和现代微量元素研究的关系，重点讨论了向量元素锌、宏量元素钙与高血压、风湿症的病因病机和治疗关系。     

Speciation of inorganic arsenic by electrochemical hydride generation atomic absorption spectrometry

A simple procedure was developed for the speciation of inorganic arsenic by electrochemical hydride generation atomic absorption spectrometry (EcHG–AAS), without pre-reduction of As(V). Glassy carbon was selected as cathode material in the flow cell. An optimum catholyte concentration for simultaneous generation of arsine from As(III) and As(V) was 0.06 mol l⁻¹ H₂SO₄. Under the optimized conditions, adequate sensitivity and difference in ratio of slopes of the calibration curves for As(III) and As(V) can be achieved at the electrolytic currents of 0.6 and 1 A. The speciation of inorganic arsenic can be performed by controlling the electrolytic currents, and the concentration of As(III) and As(V) in the sample can be calculated according to the equations of absorbance additivity obtained at two selected electrolytic currents. The calibration curves were linear up to 50 ng ml⁻¹ for both As(III) and As(V) at 0.6 and 1 A. The detection limits of the method were 0.2 and 0.5 ng ml⁻¹ for As(III) and As(V) at 0.6 A, respectively. The relative standard deviations were of 2.1% for 20 ng ml⁻¹ As(III) and 2.5% for 20 ng ml⁻¹ As(V). The method was validated by the analysis of human hair certified reference material and successfully applied to speciation of soluble inorganic arsenic in Chinese medicine.