Platinum carbonyl derived catalysts on inorganic and organic supports: a comparative study

Fumed silica, silica gel, silica-alumina and cross-linked (5.5%) polystyrene have been functionalized with quaternary ammonium groups and the Chini cluster [Pt₁₂(CO)₂₄]²⁻ has been anchored onto these functionalized materials by ion pairing. A catalyst has also been prepared by the adsorption of Na₂[Pt₁₂(CO)₂₄] on unfunctionalized fumed silica. The catalytic activities of the resultant materials, and that of commercially purchased 5% platinum on alumina have been studied for the hydrogenation of a variety of unsaturated compounds. The substrates studied are: α-acetamidocinnamic acid, cyclohexanone, acetophenone, methyl pyruvate, ethyl acetoacetate, nitrobenzene and benzonitrile. Compared to the polystyrene supported catalyst, the inorganic oxide supported catalysts have higher surface areas and for most of the substrates have notably higher activities. The functionalized fumed silica-based catalyst gives higher conversions than functionalized silica gel and silica-alumina-based catalysts. In the hydrogenation of acetophenone and ethyl acetoacetate, the functionalized fumed silica-based catalyst show superior activity compared to the commercial platinum catalyst, and the catalyst made by conventional adsorption method. In benzonitrile hydrogenation with all the cluster-derived catalysts a hydrazine derivative is selectively formed, but when the commercial platinum catalyst is used benzyl amine is the main product.     

Arsenic Speciation Analysis in Solutions Treated with Zeolites

Experiments have been carried out to study the behaviour of organoarsenicals treated with zeolites by means of speciation analysis. IC-ICP-MS was applied to identify and quantify arsenite, arsenate and the following organoarsenicals: monomethylarsonic acid (MMA), dimethylarsinic acid (DMA), trimethylarsine oxide (TMAO), tetramethylarsonium bromide (TMA⁺), arsenobetaine (AsB) and arsenocholine (AsC). Zeolites loaded with ferrous ions did not significantly increase the retention of inorganic arsenic species compared to the native zeolites, while there was a ten-fold removal of arsenate relating to arsenite. The formation of As(V) and DMA in the leachates containing clinoptilolites and mordenites was confirmed in the presence of natural and synthetic zeolites. Arsenobetaine and arsenocholine yielded higher levels of arsenate than the methylated species.     

New ferrocene-containing structures: Poly(silyl ester)s

Two new polymeric structures containing ferrocene units along the chains, namely poly(silyl ester)s, have been synthesized and characterized: a geminal poly(silyl ester) (g-PSE) and one having a disiloxane spacer between the silyl ester groups (s-PSE). The condensation polymerization of AA/BB monomer systems in solution was used in both cases as preparation method involving a silicon-containing diol, (diphenylsilane diol or 1,3-bis(hydroxy)-tetramethyldisiloxane), and 1,1′-di(chlorocarbonyl)ferrocene. The polymers were investigated by differential pulse voltammetry in order to evaluate the redox behavior. Due to the presence of the silyl ester groups in the chain, these polymers are hydrolytically degradable.     

卡尔曼滤波分光光度法同时测定钢样中的硅、磷、砷

研究了在聚乙烯醇存在下,硅、磷、砷钼杂多酸与罗丹明6G形成离子缔合物的反应,建立了能同时测定硅、磷、砷的卡尔曼滤波分光光度法。用于钢样中微量硅、磷、砷的同时测定,操作简便快速,相对误差小于8％。     

表面热电离质谱的进展

本文评述了表面热电离质谱（ＴＩＭＳ），特别是负离子质谱（ＮＴＩ－ＭＳ）对非金属和具有高电离电位的金属元素的同位素测定的进展，引用文献３４篇。     

鲁米诺-双氧水-铬(Ⅲ)化学发光体系测定化探样品中痕量砷

用鲁米诺－双氧水－铬（Ⅲ）化学发光体系结合巯基棉对Ａｓ（Ⅲ）的富集分离，建立了快速的测定化探样品中痕量砷的新方法，检测线性范围为１．０×１０－４～１．０×１０１ｍｇ／Ｌ，检出限为３．４×１０－５ｍｇ／Ｌ。用于实际化探样品测定，相对标准偏差为５．５％～９．０％。     

Silicalite-1膜反应器中的丙烷芳构化

在丙烷芳构化反应中，氢气起着相当重要的作用；根据理论分析，消除氢气将会有利于芳构化反应的进行。在Ｓｉｌｉｃａｌｉｔｅ－１沸石分子筛膜反应器，丙烷芳构化反应中的芳烃选择性提高了１０％－２０％。针Ｓｉｌｉｃａｌｉｔｅ－ｌ膜反应器与氧化铝膜反应器中的反应结果相比较，表明膜反应器效果不仅取决于膜的渗透选择性，而且还取决于膜的渗透率。     

Electrochemical synthesis of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles in alkaline aqueous solutions containing complexing agents

Ultrafine magnetite particles are prepared through an electrochemical process, at room temperature, from an iron-based electrode immersed in an alkaline aqueous medium containing complexing compounds. XRD and chemical analysis indicate that the product is pure magnetite, Fe₃O₄. The size and morphology of the particles are studied by SEM. The magnetite nanoparticles present a magnetoresistance of almost 3%, at 300 K, under a magnetic field of 1 T. A reactive mechanism for the electrochemical process is proposed.     

The Electrochemical Behavior of Keggin Polyoxometalate Modified by Tricyclic,Aromatic Entity

The inorganic‐organic hybrid polyoxometalates (POMs), (pbpy)₄H[PMo₁₂O₄₀(VO)] ( 1 ) and (pbpy)₄H₄[SiMo₁₂O₄₀] ( 2 ) (pbpy=5‐phenyl‐2‐(4‐pyridinyl)pyridine), have been synthesized and were, respectively, used as a solid bulkmodifier to fabricate a three‐dimensional bulk‐modified carbon paste electrode (CPE) by direct mixing. The electrochemical behavior and electrocatalysis of 1 and 2 modified CPE ( 1 ‐CPE and 2 ‐CPE) have been studied in detail. Both 1 ‐CPE and 2 ‐CPE show remarkable stability that can be ascribed to the doped organic conjugated pbpy, which is very important for practical applications in electrode modification.     

Analysis of metabolites of glucose pathways in human erythrocytes by analytical isotachophoresis

A method for the quantitative determination of the major anionic constituents of fountain solutions, typically mono-, di- and hydroxycarboxylates, alkylbenzenesulfonates, and inorganic anions, including orthophosphate and polyphosphates, is presented here for the first time. The analytical problems arising from extensive co-elution of many of these analytes on an ion-exchange column have been resolved through a combination of (i) careful selection of the concentration gradient of the sodium hydroxide eluent; (ii) parallel analysis by ion-exclusion chromatography; and (iii) determination of total phosphorus by inductively coupled plasma atomic emission spectrometry.