Magnetic properties of the bond and crystal field dilution spin-3/2 Blume–Capel model in an external magnetic field

Magnetic properties of the bond and crystal field dilution spin-3/2 Blume–Capel model in an external magnetic field (h)$(h)$ on simple cubic lattice are studied by using the effective field theory. In the m−T$m-T$ plane, the degeneracy of the magnetization (m)$(m)$ is affected by the concentration of bond or crystal field dilution at low temperature (T)$(T)$. The magnetization curves can appear to fluctuate in certain regions of negative crystal field. In the m−h$m-h$ plane, the initial magnetization curve has an irregular behavior due to the introduction of bond dilution. The crystal field dilution has the influence on the process of magnetic domain displacement. In the χ−h$\chi -h$ plane, there exists one susceptibility (χ)$(\chi )$ shoulder and one step for different negative crystal field. The susceptibility curve takes on the feature of multi-peaks distribution under bond and crystal field dilution conditions.     

Preparation and characterization of carbonyl iron/glass composite absorber as matched load for isolator

Composite absorbers made from 66 wt% carbonyl iron and 34 wt% low melting point glass powder were prepared by a pressureless sintering technique in a nitrogen atmosphere. Apparent porosity and bending strength of the as-prepared composites were investigated. The microstructure, heat resisting properties and electromagnetic properties were characterized by scanning electron microscopy, thermal gravimetric analysis–differential scanning calorimetry and vector network analyzer. The results show that the carbonyl iron/glass composite absorbers were difficult to densify. As the sintering temperature and soaking time increased, the apparent porosity first decreased and then increased, whereas the bending strength showed the opposite change. The composite absorber sintered at 520 °C for 40 min achieved the minimum apparent porosity of 13.08% and the highest bending strength of 52 MPa. Compared to the carbonyl iron/silicone rubber absorber, the carbonyl iron/glass composite absorber exhibited better heat resisting properties, and the initial oxidation temperature was increased about 200 °C. The composite absorber with a thickness of 1.25 mm showed a good microwave absorbing property in 8–12 GHz.     

Enhancement of electrical properties due to Cr substitution in Co-ferrite nanoparticles synthesized by two chemical techniques

Nanocrystalline cobalt ferrites with nominal composition CoCr_xFe_2−xO₄ ranging from x=0.0 to 0.5 with step increment of 0.25 were prepared by sol–gel auto combustion and chemical co-precipitation techniques. A comparative study of structural, electrical and magnetic properties of these ferrites has been measured using different characterization techniques. Structural and micro-structural studies were measured using X-ray diffraction, Fourier transform infra-red spectroscopy (FTIR), scanning electron microscopy and atomic force microscopy. Crystallite sizes of the series are within the range of 12–29±2 nm. Lattice parameters decrease by increasing Cr³⁺ concentration. FTIR confirms the presence of two lattice absorption bands. DC electrical resistivity increases to a value of ∼10¹⁰ Ω-cm with increase in Cr³⁺ concentration, but the most significant increase is in samples prepared by sol–gel combustion. Dielectric properties have been measured as a function of frequency at room temperature. Dielectric loss decreases to 0.1037 and 0.0108 at 5 MHz for chemical co-precipitation and sol–gel combustion, respectively. Impedance measurements further helped in analyzing the electrical properties and to separate the grain and grain boundary resistance effects using a complex impedance analysis. Magnetic parameters were studied using a vibrating sample magnetometer in the applied field of 10 kOe. The saturation magnetization decreased from 63 to 10.8 emu/gm with increase in Cr³⁺ concentration.     

Effects of oxygen-containing defect complex on the electronic structures and transport properties of single-walled carbon nanotubes

The electronic structures and transport properties of (10,0)$(10,0)$ single-walled carbon nanotube ((10,0)$(10,0)$ (SWNT)) with oxygen-containing defect complex are investigated using density functional theory in combination with nonequilibrium Green?s function method. The complex delocalizes the local states of (10,0)$(10,0)$ SWNT induced by mono- and di-vacancy but strengthens the localization of the states induced by the Stone–Wales defect. As a result, the complex partially restores the transport properties of (10,0)$(10,0)$ SWNT with vacancies, but reduces the transmission of (10,0)$(10,0)$ SWNT with Stone–Wales defect. However, the oxygen-containing defect complex only slightly influences the transmission gap and threshold voltage of the system.     

Effect of the thermal and hydrothermal treatment on textural properties of Zr-MCM-41 mesoporous molecular sieve

Zr-containing mesoporous molecular sieves were synthesized by hydrothermal method using cetyltrimethyl ammonium bromide as a template and sodium silicate and zirconium sulfate as raw materials. The structure and morphology of the synthesized samples were characterized via various physicochemical methods, including X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectroscopy, solid state nuclear magnetic resonance (²⁹Si MAS-NMR) techniques, thermal gravimetric-differential scanning calorimeter (TG-DSC) and N₂ physical adsorption, respectively. The effect of the different initial ZrO₂:SiO₂ molar ratio, the different thermal treatment temperature and the different hydrothermal treatment time on textural property was investigated. The experimental results reveal that the as synthesized samples possess a typical mesoporous structure of MCM-41. On the other hand, the specific surface area and pore volume of the synthesized Zr-MCM-41 mesoporous molecular sieve decrease with the increase of the amount of zirconium incorporated in the starting material, the rise of thermal treatment temperature and the prolonging of hydrothermal treatment time, the mesoporous ordering becomes poor. Also, when the molar ratio of ZrO₂:SiO₂ in the starting material is 0.1, the mesoporous structure of the Zr-MCM-41 mesoporous molecular sieve still retains after calcination at 750 °C for 3 h or hydrothermal treatment at 100 °C for 6 d, and have specific surface areas of 423.9 and 563.9 m²/g, respectively.     

食用香料的太赫兹时域光谱

食用香料是人们在烹饪过程中必不可少的调味品,对食用香料的鉴别和食用安全性检测也尤为重要.本文利用太赫兹时域光谱技术对食用香料进行测试,得到了黑胡椒、白胡椒、花椒、大料、姜粉、甘草、香叶以及五香粉、十三香等香料在太赫波段的吸收谱和折射率谱.结果表明,不同种类的香料都有其独特的特征吸收光谱,样品的吸收谱在0.2～1.25THz频段内以不同的斜率单调递增,在1.25～2.0THz频段呈现出不同的吸收峰.样品的折射率值在1.3～1.8之间变化,并且,样品的折射率在其吸收峰所对应的频率处出现了反常色散.通过对吸收系数的斜率、峰值位置以及折射率进行定标分析,太赫兹时域光谱技术可以用于不同种香料的定性检测.实验数据为食用香料的鉴别提供了依据,可以用于建立食用香料的太赫兹波谱数据库.     

Analysis of magnetic disaccommodation in La-Co-substituted strontium ferrites

M-type strontium ferrites substituted by La³⁺-Co²⁺(Sr_1−xLa_xFe_12−xCo_xO₁₉) were prepared by ceramic process. Effects of the substituted amount of La³⁺ and Co²⁺ on structure and magnetic properties of Sr_1−xLa_xFe_12−xCo_xO₁₉ compounds have systematically been investigated by X-ray diffraction (XRD), vibrating sample magnetometer (VSM) and magnetic disaccommodation. In the measurement range from 80 to 500 K, the magnetic disaccommodation is represented by means of isochronal curves. It is well known that magnetic disaccommodation cannot be obviously found in the M-type of pure strontium ferrites. However, three peaks were observed in Sr_1−xLa_xFe_12−xCo_xO₁₉, and this behavior is explained in terms of the presence of Fe²⁺ cation and to the site occupation by the magnetic Co²⁺ ionic within the hexagonal structure.     

AlN/Al dual protective coatings on NdFeB by DC magnetron sputtering

AlN/Al dual protective coatings were prepared on NdFeB by DC magnetron sputtering in a home-made industrial apparatus. Comparing with Al coating, AlN/Al coatings have a denser structure of an outmost AlN amorphous layer following an inner Al columnar crystal layer. The coatings and NdFeB substrate combine well, and moreover, there is occurrence of metallurgy bonding in the interface layer. Both Al and AlN/Al coatings have a good protective ability to NdFeB. Especially, the corrosion resistance of AlN/Al coated NdFeB is improved largely. AlN/Al and Al protective coatings not only do not deteriorate the magnetic properties of NdFeB, but contribute to their slight increase.     

纤锌矿结构AlInN电子及光学性质的第一性原理研究

本文通过基于密度泛函理论的第一性原理,研究了纤锌矿结构Al1-xInxN在不同In浓度下的稳固结构,以及电子和光学性质的变化规律。研究表明,AlInN不同In浓度的晶格结构都很稳定,说明AlInN的兼容性很好。晶格常数随In浓度的增大不断增大,而混晶的带隙则不断减小。并且随In浓度的增大,混晶在紫外光区的吸收系数、反射系数及折射率增大,吸收边、吸收峰和反射峰蓝移,且这两个峰的峰值减小。AlInN的吸收、反射和折射率曲线在Eg处出现峰值行为,此Eg处的峰值大小随In浓度的增加而增大。当In浓度达到87.5%时,混晶AlInN在紫外光区的吸收、反射和折射能力均达到最强,表明此时的掺杂效果最好。     

Electrical, dielectric and surface wetting properties of multi-walled carbon nanotubes/nylon-6 nanocomposites

This paper reports that the multi-walled carbon nanotubes(MWCNT)/nylon-6 (PA6) nanocomposites with different MWCNT loadingshave been prepared by a simple melt-compounding method. Theelectrical, dielectric, and surface wetting properties of theCNT/PA6 composites have been studied. The temperature dependence ofthe conductivity of the CNT/PA6 composite with 10.0 wt{\%} CNTloading ($\sigma _{\rm RT} \sim 10^{-4}$ S/cm) are measured, andafterwards a charge-energy-limited tunnelling model (ln $\sigma (T)\sim T^{-1/2})$ is found. With increasing CNT weight percentage from0.0 to 10.0 wt%, the dielectric constant of the CNT/PA6composites enhances and the dielectric loss tangent increases twoorders of magnitude. In addition, water contact angles of theCNT/PA6 composites increase and the composites with CNT loadinglarger than 2.0 wt%even become hydrophobic. The obtainedresults indicate that the electrical and surface properties of thecomposites have been significantly enhanced by the embedded carbonnanotubes.