Comparability of analytical results obtained in proficiency testing based on a metrological approach

A “yes–no” type of criterion is proposed for the assessment of comparability of proficiency testing (PT) results when the PT scheme is based on a metrological approach, i.e. on the use of a reference material as the test sample, etc. The criterion tests a null hypothesis concerning the insignificance of a bias of the mean of the results from a traceable value certified in the reference material used for the PT. Reliability of such assessment is determined by the probabilities of not rejecting the null hypothesis when it is true, and rejecting it when it is false (the alternative hypothesis is true). It is shown that a number of chemical, metrological and statistical reasons should be taken into account for careful formulation of the hypotheses, enabling the avoidance of an erroneous assessment of the comparability. The criterion can be helpful for PT providers and laboratory accreditation bodies in analysis of PT results.     

Preparation of apolar glass capillary columns by the barium carbonate procedure

As an extension of previous reports, the barium carbonate procedure has been optimized in detail for the preparation of apolar columns. The aim was to produce optimum overall column characteristics, and to maintain them unchanged under the prolonged influence of the highest possible temperature. The main parameters under optimization were glass variety, leaching of glass surface with aqueous HCl, and amount of barium carbonate deposited, while deactivation and coating were kept constant. The basic column characteristics were adsorption properties and thermostability of deactivation, acid/base behaviour and separation efficiency. They were determined by a new, quantitative testing procedure. Intense leaching was able to eliminate almost totally the differences between glass varieties and to create a well-defined glass surface. While untreated glass, leached glass, and barium carbonate treated glass showed specific weak points in the respective column quality, the combination of leaching and barium carbonate treatment yielded the highest and most stable quality. Some technical modifications of the preparation procedure are described, including deactivation in the gas phase, and use of pentane as a solvent for static coating.     

Statistical treatment of proficiency testing data

 There are three stages to evaluating a laboratory's results in an interlaboratory proficiency test: establishing the correct result for the test item, determining an evaluation statistic for the particular result, and establishing an acceptable range. There are a wide variety of procedures for accomplishing these three stages and a correspondingly wide variety of statistical techniques in use. Currently in North America the largest number of laboratory proficiency test programs are in the clinical laboratory field, followed by programs for environmental laboratories that test drinking water and waste water. Proficiency testing in both of these fields is under the jurisdiction of the federal government and other regulatory and accreditation agencies. Many of the statistical procedures are specified in the regulations, to assure comparability of different programs and a fair evaluation of performance. In this article statistical procedures recommended in International Organization for Standardization Guide 43, Part 1, are discussed and compared with current practices in North America. Received: 22 April 1998 · Accepted: 12 May 1998     

磁性纳米标记检测技术在生物医学即时检测领域的研究进展

基于磁性纳米材料的磁标记检测技术具有灵敏度高、线性范围广、信号检测便捷等优点。由于生物样品自身磁背景信号极低,相比于光学标记检测技术,磁标记检测技术在蛋白质、核酸、细胞、病原体及生物组织检测中均表现出更高的灵敏度,在生物医学即时检测领域展现了良好的应用前景。该文围绕磁性纳米粒在即时检测领域的最新研究进展,重点介绍了其在蛋白质、核酸以及几类病原体检测方面的应用,并对基于磁性纳米粒的即时检测技术发展方向及应用前景进行了展望。     

原油乳状液破乳的动态法研究

The stability of different crude oil emulsions from ASP flooding production well is studied by the method of a stirred tank. The demulsifying of crude-oil emulsion by different demulsifying agents is discussed. The breakage of the crude oil emulsions from the well PO11 by the different types and concentrations of the emulsifying agents is also discussed. The breaking mechanism of the demulsifying agent is described microscopically.     

Effect of initiators on grafting in the initial stage of the emulsion polymerization of methyl methacrylate using poly(vinyl alcohol) as a protective colloid

 To make clear the reason of unsuitability of poly(vinyl alcohol) (PVA) protective colloid for the emulsion polymerization of conjugated monomers, a model experiment of emulsion polymerization of methyl methacrylate (MMA) was carried out with ammonium persulfate (APS) or azobis(isobutyronitrile) (AIBN) initiators, where a small amount of MMA (1/100th of the concentration compared with ordinary emulsion polymerization) was employed. This corresponds to the initial stage of the emulsion polymerization. Grafting of MMA onto PVA took place remarkably irrespective of the kind of the initiators. Formation of homo-poly(MMA) was observed to a small extent. The formation of new emulsion particles smaller than 100 nm continued to increase to almost the end of the polymerization. PVA molecules in the grafted polymer are supposed to act as stabilizers of newly formed particles. From kinetic treatment using the experimental data, the important issues were derived as follows. Firstly, the sulfate anion radical from APS is much more reactive than the isobutyronitrile radical from AIBN in terms of hydrogen abstraction from PVA. Secondly, high grafting ability of the latter initiator system, notwithstanding the much lower reactivity in the hydrogen abstraction compared with the APS system, is attributed to the relative reactivity of the primary radicals, i.e., hydrogen abstraction reaction from PVA to initiation reaction with MMA. The much slower rate of addition of the isobutyronitrile radical to the monomer compared with that of hydrogen abstraction from PVA facilitates the grafting, although the rate constant of hydrogen abstraction is far smaller than that with the sulfate anion radical by 10⁻⁴ times. Received: 26 April 2001 Accepted: 6 September 2001     

The determination of adsorbable organically bound halogens (AOX) in soil: interlaboratory comparisons and reference materials

The interlaboratory variability in the quantification of adsorbable organically bound halogens (AOX) in industrially contaminated soil is presented. Three consecutive rounds of a proficiency testing scheme, in which between 88 and 119 routine laboratories participated, yielded relative reproducibility standard deviations between 7 and 20% at AOX contents between 10.9 and 268 mg kg⁻¹. Nineteen laboratories with established proficiency were invited to participate in the certification of the AOX content in three soil reference materials meant for the internal quality control in analytical laboratories. The certified values are (1349 ± 59) mg kg⁻¹, (80 ± 7) mg kg⁻¹ and (102 ± 8) mg kg⁻¹, respectively.     

化学镀非晶态Ni—P层的初期沉积过程研究

化学镀非晶态Ｎｉ－Ｐ镀层初期沉积过程和沉积层状态是影响结合强度的决定性因素．对不同基体材料初期沉积的观察发现，有些非晶态镀层的初期沉积中含有微晶．微晶的产生与否与基体材料以及镀层材料晶格的错配度有关，当镀层与基体材料点阵常数相差不大，镀层的初期沉积沿基体晶格外延生长出现微晶层，反之，点阵常数相差较大时，初期沉积物中未发现微晶．     

A Family of Fifth-Order Runge-Kutta Pairs

The construction of a Runge-Kutta pair of order with the minimal number of stages requires the solution of a nonlinear system of order conditions in unknowns. We define a new family of pairs which includes pairs using function evaluations per integration step as well as pairs which additionally use the first function evaluation from the next step. This is achieved by making use of Kutta's simplifying assumption on the original system of the order conditions, i.e., that all the internal nodes of a method contributing to the estimation of the endpoint solution provide, at these nodes, cost-free second-order approximations to the true solution of any differential equation. In both cases the solution of the resulting system of nonlinear equations is completely classified and described in terms of five free parameters. Optimal Runge-Kutta pairs with respect to minimized truncation error coefficients, maximal phase-lag order and various stability characteristics are presented. These pairs were selected under the assumption that they are used in Local Extrapolation Mode (the propagated solution of a problem is the one provided by the fifth-order formula of the pair). Numerical results obtained by testing the new pairs over a standard set of test problems suggest a significant improvement in efficiency when using a specific pair of the new family with minimized truncation error coefficients, instead of some other existing pairs.