Photorefractive shearing interferometer

A novel method of obtaining shearing interferogram by slightly moving the crystal in a photorefractive interferometer is proposed. This method can measure the phase of an object itself instead of its diffraction field, and it is easy to realize continuously changeable shearing distance in any lateral direction and introduce carrier fringes at the same time. Both the theoretical analysis and experimental verification are given.     

Experimental investigation of the aquatic propulsion caused by localised flexural wave propagation in immersed wedges and plates

This paper describes the results of the experimental verification of the idea of wave-like aquatic propulsion of autonomous and man-inhabited vessels first published about 10 years ago by one of the present authors (V.V.K.). The idea is based on employing the unique type of localised flexural elastic waves propagating along edges of wedge-like structures immersed in water (wedge elastic waves). Such wedge-like structures supporting localised elastic waves can be attached like fish fins to a body of a small ship or a submarine and used for their propulsion. The proposed principle of employing localised flexural waves as a source of aquatic propulsion has been biologically inspired by the specific swimming mode used in nature by stingrays. To verify the idea experimentally, the first working prototype of a small catamaran using the above-mentioned wave-like propulsion via the attached rubber keel has been build and tested in Loughborough University. The tests have been carried out in two phases, in a water tank and then in open water. The test results have shown that the catamaran was propelled very efficiently and could achieve the speed of 36 cm/s, i.e., about one vehicle length per second, thus demonstrating that the idea of wave-like propulsion of small man-inhabited craft is viable. The reported proof of the viability of this idea may open new opportunities for marine craft propulsion, which can have far reaching implications.     

定位定量检测光电内窥系统

本文分析定位定量窥测系统设计中普遍存在的问题,提出一种检测方案,并预示窥测仪器的发展趋势。     

Recognition of ring pairs in the data analysis of Cherenkov detectors

We present a new algorithm for the identification of ring pairs in Cherenkov detectors. The approach combines linear regression methods for the construction of an appropriate reference quantity, methods from statistics for the evaluation of hypotheses and Monte Carlo simulation runs for the tuning of threshold levels.     

在H－ZSM－5沸石上甲醇转化为汽油的初始产物分布

在Ｈ－ＺＳＭ－５沸石上甲醇转化为汽油的初始产物分布姜玄珍（浙江大学化学系，杭州３１００２７）Ｒ．Ｆ．Ｈｏｗｅ（新南威尔士大学物理化学系，澳大利亚）关键词Ｈ－ＺＳＭ－５沸石，甲醇转化汽油，产物分布以氢型ＺＳＭ－５沸石作催化剂转化甲醇为汽油（ＭＴＧ），在...     

Use of participant EQA results to assess sample homogeneity and stability for qualitative analytes

International requirements for PT and EQA state that providers must demonstrate that samples are homogeneous and stable. However, testing for homogeneity and stability can be expensive, use samples that could otherwise serve as quality-control materials, and can also fail to detect significant inhomogeneity and instability. In some situations it may be preferable to use the results from participants to identify problems with sample lots, if historic results follow predictable distributions and a statistical decision rule can be produced. An unusually high proportion of incorrect results may indicate that samples were inhomogeneous or unstable. Conditions under which this can be demonstrated are discussed, and the efficacy of the proposal is demonstrated with two examples. This procedure is especially effective when there are a large number of participants and/or a historic small proportion of incorrect results. Providers who adopt this proposal will need to retain samples for testing and assume the risk of distributing bad samples.Presented at the Eurachem PT Workshop September 2005, Portorož, Slovenia     

Electrochemical instability of bis(trifluoromethylsulfonyl)imide based ionic liquids as solvents in high voltage electrolytes for potassium ion batteries

1. Download : Download high-res image (153KB)
2. Download : Download full-size image

     

Proficiency testing programmes as a tool in food quality assurance: Overview of Italian experiences

Proficiency testing involves the performance of test procedures on routine samples by a number of laboratories. Interlaboratory proficiency testings provide multiple benefits to participants since they play a key-role in the total quality control of laboratory activities. They serve as a means of self-improving, as a mechanism of continuing education and as a source of information for accreditation agencies. This review highlights basic principles, benefits, criteria and capabilities of a proficiency testing programme for food analysis laboratories as well as their role in the implementation of rapidly developing food control legislation.     

仪器分析测试技术信息化教学探索与实践

针对高职学生的特点，以仪器分析测试技术课程实训教学为例，按照课前布置学习任务，学生翻转课堂学习，"教、学、做"一体化课堂教学，课后复习巩固的形式，开展信息化教学的探索与实践，并对信息化教学的效果和存在的问题进行了分析。通过信息化教学改革，仪器分析测试技术课程突破了传统教学时空的限制，激发了学生学习的兴趣，构建了"学生主体、教师主导"的教学新模式，提高了课堂教学效果，对推动高职课堂信息化教学的改革具有一定的借鉴意义。     

The effect of (natural) polyols on the initial colour of heavy metal- and zinc-free poly(vinyl chloride)

The propensity of (natural) polyols dispersed in heavy metal- and zinc-free PVC sheets to improve the initial colour, e.g. the colour during the first minutes of exposure to high processing temperatures (short-term stability), has been investigated. It is shown using W(Lab) values that the initial colour improves upon addition of polyols containing primary hydroxyl groups. The polyols act as HCl scavengers, presumably via an acid-catalysed S_N2 substitution of the primary hydroxyl groups by chloride ions. In contrast, polyols with only secondary or tertiary hydroxyl groups accelerate the thermal degradation of PVC. Notwithstanding, the efficacy of the (natural) polyols containing primary hydroxyl groups will be reduced if the polyol is susceptible to competitive acid-catalysed intramolecular cyclodehydration reactions under the processing conditions. This is substantiated by a comparison of the behaviour of mannitol and 3,4-di-O-methyl-d-mannitol. The methylated derivative, which is less prone to undergo intramolecular cyclodehydration, improves the initial colour of heavy metal- and zinc-free PVC sheets more significantly than mannitol itself.