一类非线性发展方程整体弱解的存在性和稳定性

该文考虑一类新的非线性方程(｜ut｜r-2ut)t-Δutt-Δu-ρ(t)Δut=f(u) 的初边值问题，利用小扰动法证明了整体弱解的 存在性，借用位势井的概念得到了解的稳定性.〖HT5”H〗关键词:〖HT5”SS〗非线性发展方程;初边值问题;整体弱解;稳定性.     

利用计算机辅助装调检测矩形大口径离轴非球面的方法研究

通过非球面的零位补偿法,完成了对矩形大口径离轴非球面镜的检测。先用光学设计软件Zemax从理论上分析了在检测中会出现的现象,并结合计算机辅助装调技术,确定在检测过程中相对敏感的自由度,然后控制这些量,使补偿器和非球面的相对关系与理论设计相吻合,在Zygo相位干涉仪上测得最终结果。在λ=632.8nm时,中心圆口径与两个边缘圆口径面形误差RMS分别为0.022λ,0.037λ,0.032λ。检测结果,达到预期目的。     

Development of a Millimeter Wave Compact Equipment for NDT of Materials

We developed a compact equipment working at 94 GHz to replace the commonly used network analyzer for nondestructive testing of materials. The compact equipment was designed to measure the variations in the amplitude and phase of the reflected signal from the material relative to a reference signal. A good accuracy of the amplitude and phase measurement of the equipment was obtained in the confirmative experiments. The distribution of a drop of water in a wood plate is clearly visible in the millimeter wave images obtained by the amplitude and phase measurement.     

基于分层光学扫描的三维数字化测量技术

采用切削分层光扫描测量与计算机数据信息合成相结合的方法，有效地解决了具有复杂内外腔结构零件的三维数字化测量。该方法比传统三维测量速度快、自动化程度高，能同时准确测量零件内外腔表面，零件边缘测量误差可控制在CCD两个像素内。利用获取的铝合金精密小箱体三维数据，在计算机上重构了零件的三维模型，并用RP技术制造出了零件物理原形。     

On the optimization of the initial boundary value problem for a conservation law

In the present note, the theory of shift differentiability for the Cauchy problem is extended to the case of an initial boundary value problem for a conservation law. This result allows to exhibit an Euler-Lagrange equation to be satisfied by the extrema of integral functionals defined on the solutions of initial boundary value problems of this kind.     

On the concept of point value in the infinite-dimensional realization theory

In this article, we study the effect of the chosen representation of a point value (and point evaluation) on the class of periodic signals realizable using a certain type of infinite-dimensional linear system. By suitably representing the point evaluation at the origin in a Hilbert space, we are able to give a complete characterization of its extensions. These extensions involve a new concept called δ-sequence, the use of which as an observation operator of an infinite-dimensional linear system is studied in this article. In particular, we consider their use in the realization of periodic signals. We also investigate how the use of δ-sequences affects the convergence properties of such realizations; we consider the rate and character of convergence and the removal of the Gibbs phenomenon. As still a further demonstration of the significance of the chosen concept of a point value, we discuss the use of distributional point values in the realization of periodic distributions. The possible applications of this work lie in regulator problems of infinite-dimensional control theory, as is indicated by the well-known internal model principle.     

Plastic multipliers as driving variables of numerical simulation in elastoplasticity

Statics of elasto-plastic media is stated in terms of eigenstrains acting upon a background elastic problem with fixed (initial) stiffness. In order to minimize the number of unknowns and to provide computationally cheap algorithms plastic multipliers are used as main driving variables. Fixed-point type iterations are suggested for computing plastic multipliers within the load increment. Numerical experiments results are shown to be in good correlation with other software results. A range of problems is outlined where the usage of the proposed algorithms can be advantageous.     

偏振小孔干涉仪

偏振小孔干涉仪是一种可实用的新型干涉仪。它综合小孔衍射技术、偏振技术和共光路设计为一体,具有条纹对比度可调、抗干扰能力强和非接触检验等优点,可广泛用于各种光学元件及其胶合层的检验。目测精度达1/10λ,计算机条纹处理精度可调。     

浅议物理实验教学环节改革

为进一步提高大学物理实验的教学质量，本文就实验课的预习、操作、实验报告的撰写及考核方法进行了探讨。     

解初值问题y″=g(x，y)的含参数块方法

1引言对于二阶常微分方程的初值问题y″=g(x,y),y(x_0)=y_0,y′(x_0)=y_0′,x_0(?)x(?)T(1)的数值解法的研究引起人们的广泛兴趣．对于直接积分(1),自从1976年J．D．Lambert和I．A．Waston提出二阶P-稳定方法和1978年G．Dahlquist证明P-稳定常系数线性多步方法的最高相容阶不超过2的重要结论以来,截止目前,已积累了许多高于2阶的P-稳定方法．例如,修正的Numerov方法,混合法(特殊形式RK的方法),多导法,Obrechkoff方法,显式RKN方法,单隐方法和对角隐式RKN方法等(顺便指出,文献[5,16]中所说的高阶方法的相容阶均不超过4)．所有这些方法,有些相