Surface modification of polyethylene terephthalate using PEO-polybutadiene-PEO triblock copolymers

The initial step of thrombus formation on blood-contacting biomaterials is known to be adsorption of blood proteins followed by platelet adhesion. It is generally accepted that surface modification of the biomaterials with poly(ethylene oxide) (PEO) substantially reduces protein adsorption and cell adhesion. Dacron® (polyethylene terephthalate) fabric, which is one of the biomaterials commonly used in blood-contacting devices, was grafted with PEO. A simple two-step procedure for covalent grafting of PEO onto the surface of Dacron® fabric was used. The surface was first treated with PEO-polybutadiene-PEO (PEO-PB-PEO) triblock copolymer, to introduce a layer of double bonds onto the surface. The Dacron® surface was then exposed to a solution of Pluronic® F108 (PF108), a commercially available PEO-poly(propylene oxide)-PEO (PEO-PPO-PEO) triblock copolymer. The surface with two adsorbed layers of PEO-PB-PEO and PF108 was γ-irradiated in the presence of PF108 in the bulk solution for a total radiation dose of 0.8 Mrad. The bulk concentrations of PEO-PB-PEO and PF108 were varied to maximize the efficiency of PEO grafting. Fibrinogen adsorption on PEO-grafted surfaces was reduced more than 90%, compared with that on control surfaces, irrespective of the bulk concentrations of polymers used for grafting. Platelet adhesion was also reduced substantially by PEO grafting. Only a few round platelets were able to adhere to the PEO-grafted surface, while the control surface was fully covered with aggregates of activated platelets. PEO grafting on polyethylene terephthalate using PEO-PB-PEO and PEO-PPO-PEO block copolymers is a simple approach that can be used for various other biomaterials.     

SYNTHETIC STUDIES ON BLOOD COMPATIBLE BIOMATERIALS 13:A NOVEL SEGMENTED POLYURETHANE CONTAINING PHOSPHORYLCHOLINE STRUCTURE:SYNTHESIS,CHARACTERIZATION AND BLOOD COMPATIBILITY EVALUATION

A new phosphorylcholine, (6-hydroxy) hexyl-2-(trimethylammonio) ethyl phosphate (HTEP), was synthesized andcharasterized. Segmented polyurethane (SPU) containing phosphorylcholine structure was synthesized based ondiphenylmethane diisocyanate (MDI), soft segment polytetramethylene glycol (PTMG) and HTEP, with 1,4-butanediol (BD)as a chain extender. The existence of phosphorylcholine structure on the surface of SPU was revealed by attenuated totalreflectance Fourier transform infrard spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS) and water contactangle measurements. The blood compatibilities of the polymers were evaluated by hemolytic testing and a platelet-richplasma (PRP) adhesion experiment, which was viewed by scanning electron microscopy (SEM) with polyurethane as areference. The novel segmented polyurethane containing phosphorylcholine structure showed improved blood compatibility.     

An investigation of dynamic mechanical, thermal, and electrical properties of housing materials for outdoor polymeric insulators

The present paper reports the results about a study of mechanical, thermal, dynamic mechanical and electrical properties of housing (weather shed) materials for outdoor polymeric insulators. Silicone rubber, ethylene-propylene-diene monomer (EPDM) and alloys of silicon-EPDM are known polymers for use as housing in high voltage insulators. The result of dynamical mechanical measurement shows that the storage modulus of blends enhances with increase EPDM in formulation. It can be seen from the result of TGA measurement that initial thermal degradation of silicone rubber improves by the effect of EPDM in blends. The blends of silicone-EPDM show good breakdown voltage strength compared to silicone rubber. Surface and volume resistance of silicone rubber improve by EPDM content. The mechanical properties of EPDM such as strength, modulus and elongation at break improve by silicone.     

Surface modification of polypropylene microfiltration membranes by graft polymerization of N-vinyl-2-pyrrolidone

A hydrophilic polymer, poly(N-vinyl-2-pyrrolidone), was tethered on the surface of polypropylene microfiltration membrane (PPMM) by UV photo-assisted and γ-ray pre-irradiation induced graft polymerizations. Results revealed that the γ-ray pre-irradiation graft polymerization was more efficient in view of the grafting degree. The chemical changes of the membrane surface were confirmed by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. Pure water contact angle on poly(N-vinyl-2-pyrrolidone)-grafted PPMM decreased with the increase of grafting degree, which indicated an enhanced hydrophilicity for the modified membrane. Both bovine serum albumin adsorption and static platelets adhesion were measured to evaluate the bio-compatibility of the poly(N-vinyl-2-pyrrolidone)-modified PPMM. The statistical amounts of adsorbed bovine serum albumin and adhered platelets on unit membrane area decreased significantly, which to a certain degree demonstrated that the hemocompatibility of PPMM was improved. The N₂ permeability and the mean pore diameters of different PPMMs increased at first, then decreased after certain grafting degree. The changes of water flux followed a similar tendency. These indicated that at low grafting degree pore degradation induced by γ-ray irradiation had a major impact on permeability, while this was overcompensated by the grafted polymer at high grafting degrees.     

Computational studies on glyceraldehyde and glycine Maillard reaction—I

Mechanisms for the initial stage of glyceraldehyde and glycine Maillard reaction under different pH conditions have been proposed, following usually the Hodge-scheme. Computations have been performed on the mechanisms at the standard state to test the possibility of the formation of different compounds, through evaluating the changes in Gibb's free energy during the reaction. Electronic energy changes during the reaction have also been evaluated. Glyceraldehyde+deprotonated glycine reaction has been found to be the most favorable for the formation of the Amadori rearrangement products in both gaseous and aqueous states. Due to the possibility of the production of both enol and keto forms of the Amadori rearrangement product, the rate of browning in glyceraldehyde+deprotonated glycine reaction is assumed to be faster than the others. Glyceraldehyde+unionized glycine reaction has been found to be more plausible for the formation of the keto form of the Amadori rearrangement products, particularly, in the gaseous phase. Glyceraldehyde+protonated glycine and glyceraldehyde+glycine zwitterion reactions are not favorable for the formation of the Amadori rearrangement products. Formation of hydroxyacetaldehyde from glyceralaldehyde, as one of the possible C2-fragmentation product, has been found to be favorable in the aqueous state.     

The use of inverse gas chromatography to study surface thermal oxidation of polypropylene

Thermo-oxidative effects on the surface energy of polypropylene were measured by inverse gas chromatography as a function of exposure time and temperature. Unaltered polypropylene had a surface energy of 33 mJ/m². Oxidized polypropylene, after exposure to air at temperatures of 100 °C and 110 °C, had a range of maximum surface energies from 38 to 41 mJ/m². Comparisons between FTIR carbonyl peak growth and the surface energy showed that both methods detect oxidation, though the increase in surface energy is detected before the carbonyl peak growth is noticeable. The work of adhesion predicted by the surface free energies obtained in this work between a coated calcium carbonate and polypropylene changes by 10% due to the oxidation of the polymer at 110 °C.     

明胶改性聚醚醚酮微载体的制备、表征及性能

微载体因其具有较高的表面积/体积比等优点可以大大提高哺乳动物细胞培养效率,被广泛应用于生物制药和组织工程等领域。 但微载体多为一次性使用,不耐高温,且主要依赖进口,价格昂贵,因而限制了其国内的应用和推广。 聚醚醚酮(PEEK)材料具有良好的生物相容性、化学稳定性及耐高温等特性,是一种优异的微载体材料,但存在熔点高,加工方法单一和生物惰性等缺陷。 本文以浓硫酸为溶剂,乙醇溶液为萃取剂,采用气流辅助滴注/相分离法,将PEEK制备成448 μm左右,尺寸均匀的微球;经氨丙基三乙氧基硅烷(APTES)处理,获得表面氨基化修饰的PEEK微球(PEEK-N);进一步,以N,N'-羰基二咪唑(CDI)为活性中间体,将明胶分子接枝到PEEK-N微球表面,获得表面明胶修饰的PEEK微载体(PEEK-G)。 对材料的物理化学性质、表面接枝量进行表征;并通过体外细胞实验评估其细胞毒性、细胞粘附效率和细胞增殖能力。 结果显示,通过该方法制备成功了3种不同明胶接枝含量的PEEK细胞微载体(PEEK-G1,PEEK-G2,PEEK-G3),其中明胶含量较高的PEEK-G3毒性最低,细胞粘附和增殖效果最理想。     

Effect of Al2O3 nanoparticles on the steel-glass/epoxy composite joint bonded by a two-component structural acrylic adhesive

This paper reports a study on the effect of Al₂O₃ nanoparticles on the adhesion strength of steel-glass/epoxy composite joints bonded by a two-component structural acrylic adhesive. The addition of Al₂O₃ nanoparticles to the two-component acrylic adhesive led to a remarkable enhancement in the shear and tensile strength of the composite joints. The shear and tensile strength of the adhesive joints increased by addition of Al₂O₃ up to 1.5 wt%, which decreased by further addition of the nanofiller. Introduction of the nanoparticles caused a reduction in the peel strength of the joints. DSC analysis revealed that the glass transition temperature (Tg) of the adhesives rose by increasing the nanofiller content. The advancing water contact angle was decreased for adhesives containing nanoparticles. SEM micrographs indicated good dispersions of the Al₂O₃ nanoparticles within the acrylic matrix in the specimens with up to 1.5 wt% Al₂O₃ and revealed that addition of nanoparticles altered the fracture morphology from smooth to rough fracture surfaces.     

Numerical analysis of the initial conditions in fractional systems

Fractional dynamics is a growing topic in theoretical and experimental scientific research. A classical problem is the initialization required by fractional operators. While the problem is clear from the mathematical point of view, it constitutes a challenge in applied sciences. This paper addresses the problem of initialization and its effect upon dynamical system simulation when adopting numerical approximations. The results are compatible with system dynamics and clarify the formulation of adequate values for the initial conditions in numerical simulations.