An investigation of dynamic mechanical, thermal, and electrical properties of housing materials for outdoor polymeric insulators

The present paper reports the results about a study of mechanical, thermal, dynamic mechanical and electrical properties of housing (weather shed) materials for outdoor polymeric insulators. Silicone rubber, ethylene-propylene-diene monomer (EPDM) and alloys of silicon-EPDM are known polymers for use as housing in high voltage insulators. The result of dynamical mechanical measurement shows that the storage modulus of blends enhances with increase EPDM in formulation. It can be seen from the result of TGA measurement that initial thermal degradation of silicone rubber improves by the effect of EPDM in blends. The blends of silicone-EPDM show good breakdown voltage strength compared to silicone rubber. Surface and volume resistance of silicone rubber improve by EPDM content. The mechanical properties of EPDM such as strength, modulus and elongation at break improve by silicone.     

Titania membrane preparation with chemical stability for very hash environments applications

The high-quality tubular titania MF membranes are successfully prepared by dip-coating techniques and systematically investigated with regard to their corrosive resistances. The experiments show that dispersants PAA and anatase powder were preferably employed to prepare desired suspensions with solid loading 10–15 wt.% and that suspensions properties significantly affect the final membranes quality. The titania MF membranes with pure water permeability 742.42 l m⁻² h⁻¹ bar⁻¹ and 0.1 μm pore diameter have been obtained using the prepared suspensions. The corrosion resistance of titania membranes exhibits that the anatase layers are more stable than the alumina supports in boiling corrosive medium and that the poor quality titania MF membranes become more deteriorated due to its top layer pore blockages and fouling layer formation, which provides a wide range of practical application fields in very hash environments with reliable data supports.     

Synthesis of 2′-O-[2-[(N,N-dialkylamino)oxy]ethyl]-modified oligonucleotides: hybridization affinity, resistance to nuclease, and protein binding characteristics

Synthesis of a series of 2′-O-[2-[(N,N-dialkylamino)oxy]ethyl]-modified 5-methyluridine nucleoside phosphoramidites and solid supports are described. Using these monomers, modified oligonucleotides containing phosphodiester linkages were synthesized in high yields. These modified oligonucleotides showed enhanced binding affinity to the complementary RNA (and not to DNA) and excellent nuclease stability with t_1/2>24 h. The human serum albumin binding properties of modified oligonucleotides have been evaluated to assess their transport and toxicity properties.     

青霉素G钾盐在CTAB胶束中的水解及其抑制

以紫外光谱法研究了青霉素G钾盐(Pen-K)在十六烷基三甲基溴化铵（CTAB）胶束体系中的水解反应, 并探讨了水解反应机理.结果表明, CTAB胶束对Pen-K的水解具有抑制作用; Pen-K在CTAB胶束体系水解时,体系pH值的变化与在水中相似, 表明H＋浓度对这种抑制作用影响较小.红外光谱和微极性研究表明,部分Pen-K钾盐定位于CTAB胶束栅栏层中, 增加了其稳定性.     

阻抑-褪色光度法测定痕量间苯二酚

在NH3 NH4Cl介质中 ,间苯二酚能阻抑Fe(Ⅲ )为催化剂 ,邻菲罗啉为活化剂的过氧化氢氧化甲酚红的褪色反应。研究了该反应的最佳条件和动力学参数。建立了一种测定痕量间苯二酚的新方法。方法检出限为 3 5× 1 0 - 4 g·L- 1 ,测定范围为 0 .30mg/L～ 7.0mg/L ,方法可用于废水中间苯二酚的测定     

Characterisation of inhibitors of acetylcholinesterase by an automated amperometric flow-injection system

Acetylcholinesterase was immobilised on magnetic particles and integrated in a flow-injection system via a magnetic reactor. Enzyme activity was determined amperometrically using acetylthiocholine chloride as enzyme substrate. This system was applied to enzyme inhibition tests. Inhibition constants and lower detection limits were determined for carbofuran, paraoxon, malaoxon and paraoxon-methyl. The resulting data were compared to those obtained with a photometric test, i.e. the determination of thiocholine via its reaction with the Ellman's reagent 5,5'-dithio-bis-2-nitrobenzoic acid using the same flow system. As they correlated well to those reported for the native enzyme the flow-injection analysis device can be applied to automated determination and characterisation of enzyme inhibitors.     

耐超高温SiC(Al)纤维先驱体——聚铝碳硅烷纤维的研究

以聚硅碳硅烷(PSCS)与乙酰丙酮铝(Al(AcAc)3)为原料,在常压高温条件下反应制备出聚铝碳硅烷(PACS),经过熔融纺丝制备了PACS纤维.应用GPC、IR、XPS、29Si-NMR、27Al-NMR、TG、SEM、元素分析和增重等一系列分析,分别对PACS纤维的微观组成、结构以及性能进行了分析.研究结果表明,以原料质量配比为6∶100(Al(AcAc)3∶PSCS)合成的PACS化学式为SiC2.0H7.5O0.13Al0.018,数均分子量为1700左右,最适宜制备PACS纤维;PACS纤维中主要存在SiC4、SiC3H等结构,同时存在Si—O—Al键;在氮气气氛中,PACS纤维的陶瓷产率达到52%左右;预氧化处理,PACS纤维中Si—H键与空气中的氧反应形成Si—O—Si交联结构,较聚碳硅烷(PCS)纤维易于氧化,经过预氧化的PACS纤维陶瓷产率达到80%左右,是制备耐超高温SiC(Al)陶瓷纤维的合适纤维;用预氧化PACS纤维制备的SiC(OAl)纤维和SiC(Al)纤维抗拉强度高,耐高温性能好.     

Synthesis of a Novel Core-shell Type Acrylic-polyurethane Hybrid Emulsion Containing Siloxane and Fluorine as well as Water and the Oil Resistances of Cured Film

Aqueous acrylic-polyurethane dispersions have become one of the major types of materials used in coating, paint and adhesive industries, because of excellent properties and environmental advantages1-5. However, some properties for cured film such as water…     

Structure and microporous formation of cellulose/silk fibroin blend membranes: Part II. Effect of post-treatment by alkali

Blend membranes (RCF1) were prepared from mixture solution of cellulose and silk fibroin (SF) in cuoxam by coagulating with acetone–acetic acid (4:1 by volume). The blend membranes were subjected to post-treatment with 10% NaOH aqueous solution, and their structure and properties were characterized by FT-IR, X-ray diffraction, DSC, SEM and DMTA. In previous work, cellulose/SF blend membranes (RCF2) prepared by coagulating with 10% NaOH aqueous solution formed a microporous structure, in which the SF as a pore former was almost completely removed from the membrane. However, when the blend membranes RCF1 were immersed in 10% NaOH aqueous solution for post-treatment, a strong hydrogen bonding between cellulose and SF inhibited the removal of SF. Although alkali is a good solvent for SF, the blend membranes RCF1 such obtained from cellulose and SF were alkali resistant. The crystallinity and the mean pore size of the blend membranes slightly decreased with increasing post-treatment time. This work provided a cellulose/silk blend membrane, which can be used under alkaline medium.