Ion Drift Measurements Around a Grounded Sphere in Magnetized Sub‐Sonic Plasma Flows

The ion kinetics around a spherical object immersed in a sub‐sonic flowing plasma has been investigated by non‐invasive laser induced fluorescence for direct measurement of the ion velocity distribution function. The measurements are compared to Langmuir probe and emissive probe measurements. Indications for ion focusing as observed by previous works were observed. The plasma under observation was varied in magnetization and mean parallel plasma drift. The experiments were conducted in the linear plasma device VINETA at the Max‐Planck‐Institute for Plasma Physics in Greifswald. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

用改进的格点哈密顿量计算2+1维QCD 0++胶球质量

用改进的格点哈密顿量和截断本征方程法计算2＋1维QCD 0^ 胶球质量,结果显示较好的标度行为。     

Generation and characterization of millimeter-scale plasmas for the research of laser plasma interactions on Shenguang-III prototype

In order to produce millimeter-scale plasmas for the research of laser-plasma interactions （LPIs）, gasbag target is designed and tested on Shenguang-III prototype laser facility. The x-ray pinhole images show that millimeter-scale plasmas are produced with the gasbag. The electron temperature inferred from the stimulated Raman scattering （SRS） spectrum is about 1.6 keV. The SRS spectrum also indicates that the electron density has a fiat region within the duration of 200 ps. The obvious differences between the results of the gasbag and that of the void half hohlraum show the feasibility of the gasbag target in creating millimeter-scale plasmas. The LPIs in these millimeter-scale plasmas may partially mimic those in the ignition condition because the duration of the existence of a flat plasma density is much larger than the growth time of the two main instabilities, i.e., SRS and stimulated Brillouin scattering （SBS）. So we make the conclusion that the gasbag target can be used to research the large-scale LPIs.     

有压腔式吸热器复杂耦合换热机理数值研究

本文建立了有压腔式太阳能吸热器(PVSR)轴对称计算模型,运用蒙特卡罗光线追踪法(MCRT)模拟了二次聚光器(SC)与有压腔式吸热器(PVR)系统内聚光过程与光热转换过程,进而与计算流体与传热的有限容积方法(FVM)结合研究了高温高压吸热器内复杂耦合传热过程.在此基础上,进一步对比考察了考虑不同换热过程的换热机理,分析...     

Bandgap characteristics of 2D plasma photonic crystal with oblique incidence:TM case

A novel periodic boundary condition (PBC), that is the constant transverse wavenumber (CTW) method, is introduced to solve the time delay in the transverse plane with oblique incidence. Based on the novel PBC, the FDTD/PBC algorithm is proposed to study periodic structure consisting of plasma and vacuum. Then the reflection coefficient for the plasma slab from the FDTD/PBC algorithm is compared with the analytic results to show the validity of our technique. Finally, the reflection coefficients for the plasma photonic crystals are calculated using the FDTD/PBC algorithm to study the variation of bandgap characteristics with the incident angle and the plasma parameters. Thus it has provided the guiding sense for the actual manufacturing plasma photonic crystal.     

不稳定分布的碳烟消光表征方法及规律分析

碳烟的消光表征方法有很多种,但对于评价不稳定分布的碳烟体系,需要花费较大的代价。基于RDG-FA理论提出了一种相对简便易行的适用于不稳定分布碳烟的消光表征方法,即以碳烟的质量浓度权重的平均质量消光系数来评价碳烟的消光特性。根据理论推导,碳烟的消光系数为平均质量消光系数和总质量浓度之积,而平均质量消光系数表达式中的各项均可通过理论分析、计算和实验方法得到。另外,对平均质量消光系数随碳烟粒径和聚合粒子尺寸的变化规律进行了理论分析,预测随着碳烟粒径和聚合粒子尺寸减小,碳烟的平均质量消光系数先快速减小,然后进入缓变区,慢慢减小。     

一种宽能谱多球中子谱仪能量响应的MC模拟

利用蒙特卡罗程序FLUKA模拟计算了聚乙烯慢化球和辅助材料慢化球对低能中子到高能中子的响应函数曲线。结果表明,对纯聚乙烯球来说,随着聚乙烯层厚度的增加,响应曲线峰逐步右移,峰值在高能区有所下降,对20 Me V以上的中子,无论纯聚乙烯球的尺寸有多大,其响应均下降到很低的程度;对辅助材料慢化球来说,中子能量小于1 Me V时,辅助材料慢化球与聚乙烯慢化球的响应曲线相似,但当中子能量大于20 Me V时,中子与辅助材料层发生(n,xn)反应,慢化球的响应呈显著上升趋势。分析计算结果,最终能够确定宽能谱多球中子谱仪的尺寸组合。     

基于耦合Ginzburg-Landau方程的石墨烯锁模光纤激光器的暗暗孤子解及其稳定性

以耦合Ginzburg-Landau方程为模型,对石墨烯锁模光纤激光器中脉冲的动力学行为进行了详细地研究.首先,采用拟解法推导了该方程组的啁啾类暗暗孤子对解;其次,对啁啾类暗暗孤子对的传输特性及稳定性进行了数值研究.结果表明:合理选择系统参数,不仅可以得到啁啾类暗暗孤子对的精确解,而且该精确解还可以在一定的扰动下稳定传输.相关结果将为设计和改善石墨烯锁模光纤激光器的性能提供一定的理论依据.     

多孔建材中VOC扩散系数的两尺度模型

基于对建材微观结构的分析和压汞实验,提出了预测建材中有机挥发物(VOC)扩散系数的宏观一介观两尺度模型.和传统的从压汞实验计算扩散系数方法不同的是,本模型不仅考虑了孔隙率,还对孔的尺度分布和孔的连接方式进行了研究和分析.三种不同中密度板中VOC的散发实验表明,采用新模型计算的扩散系数比文献中的传统模型更好地吻合实验数据.     

磁约束等离子体推进器磁体系统的电磁力和机械应力分析

根据磁约束等离子体推进器磁体系统的设计参数,通过ANSYS有限元分析软件在电磁-结构耦合场方面的计算,得到磁体系统的轴向电磁力和机械应力的分布。计算超导磁体在通电情况下,磁体中平面上所有节点所受的轴向电磁压缩力以及磁体间的相互作用力;计算出磁体外层用不锈钢钢丝加固前后机械应力分布情况的变化。