Influence of thermal annealing duration of buffer layer on the crystalline quality of In0.82Ga0.18As grown on InP substrate by LP-MOCVD

In_0.82Ga_0.18As epilayers were grown on InP substrates using a two-step growth technique by LP-MOCVD. A homogeneous low-temperature (450 °C) In_0.82Ga_0.18As buffer layer was introduced to improve the crystalline quality of epilayers. The influence of low-temperature buffer layer deposition condition, such as thermal annealing duration, on the crystalline quality of the In_0.82Ga_0.18As epilayer was investigated. Double-crystal X-ray diffraction measurement, Hall measurement, and Raman scattering spectrum were used to evaluate the In_0.82Ga_0.18As epilayers. Atomic force microscope was used to study the surface morphology. It is found that the In_0.82Ga_0.18As epilayer, with buffer layer thermal annealing for 5 min, exhibits the best crystalline quality. The change of the surface morphology of the buffer layer after thermal annealing treatment was suggested to explain the phenomenon.     

高功率980nm垂直腔面发射激光器的亮度特性

在循环水冷却(工作环境温度控制在15℃)和连续注入电流条件下,从垂直腔面发射激光器(VCSEL)亮度基本定义出发,实验测量了不同注入电流时口径为400μm的高功率980nm InGaAs/GaAs应变量子阱垂直腔面发射激光器(VCSEL)的亮度特性。结果表明:在注入电流4 A时,随着注入电流的增加,亮度也跟着增加;当注入电流4A时,尽管输出功率在增加,但是器件的光束质量变差,M2因子升高,表明此时影响器件亮度的主导因素是M2因子,所以亮度减小;在注入电流为4A,输出功率为1.2W时,亮度达到最大值2.43kW/cm2.sr,此时的光束质量最好,M2因子为207。最后,分析了影响高功率VCSEL器件亮度特性的主要因素,提出了提高器件亮度特性的解决方法。     

A study of time over threshold (TOT) technique for plastic scintillator counter

A new charge measurement method, time over threshold (TOT), has been used in some gas detectors lately. Here TOT is studied for TOF system, made of plastic scintillator counter, which can simplify the electronics of the system. The signal characteristics are measured and analyzed with a high quality oscilloscope, including noise, pedestal, signal amplitude, total charge, rise time and the correlation between them. The TOT and charge are related and can be fitted by some empirical formula. The charge measurement resolution by TOT is given and this will help the design of TOF electronics.     

Index for vehicle acoustical comfort inside a passenger car

Sound quality is among the main factors that influence customers’ preference for choosing good automobile products. It all started more than 10 years ago and grows up so fast due to high competition in the automotive industries. A-weighted noise levels and sound power are usually utilised to measure the noise but they are not adequate to characterise the impact sound inside a car. The most popular approach to determine sound quality of a product is to define an annoyance or specific index, which involves both subjective and objective evaluations. Subjective and objective tests should be studied concurrently in order to determine the sound quality inside a passenger car. This approach is used in this paper to evaluate vehicle comfort index according to most frequently used sound quality metrics, namely; Zwicker loudness, sharpness, roughness and fluctuation strength. As a result researchers of different fields of automotive acoustics investigations can use this index according to the type of road (international road roughness) without any need to perform time-consuming jury tests. The metrics are correlated with jury test results that show which of them and how much has affected the acoustical comfort of the vehicle. The relation between road roughness and vehicle acoustical comfort index is another point of interest in this research.     

An analytical model to estimate the performance of an indoor barrier at low-medium frequencies

Indoor barriers are now widely used for sound insulation. This paper examines the performance of indoor barriers in the low-medium frequency range and analyses the interaction between different natural modes of a room-barrier-room system. Morse proposed a theoretical model to calculate the sound field in a coupled-room, but this model neglects the surface integral of the boundary values of sound pressure. To estimate the performance of a barrier in an indoor environment, an analytical model is proposed that modifies the Green’s function for a non-rigid boundary enclosure and approximates the surface integral by a pre-estimated sound pressure based on Morse’s model. An additional approximation has been made in the proposed model to neglect the coupling area in the calculation of the surface integral. The proposed model used to predict the insertion loss of the barrier is verified by the experimental results using a 1:5 scale model. The predicted results agree well with the measured results at lower frequencies.     

用DIS位移传感器研究气垫导轨上的阻尼振动

在简述阻尼振动实验原理的基础上,阐述了用DIS位移传感器研究气垫导轨上阻尼振动的方法,通过对比实验进一步论述了该方法的可行性.     

螺旋管内高压汽水两相流动沸腾干涸点的研究

在较宽的实验参数范围内(系统压力P=8～15 MPa,质量流速G=800～1800 kg·m~(-2)·s~(-1),壁面热流密度q_w=200～950 kW·m~(-2))对一立式螺旋管内(管内径为10 mm,螺旋直径为300 mm,节距为50 mm)汽水两相流动沸腾干涸特性进行了实验研究。通过研究,获得了干涸发生时螺旋管圈壁温的分布特征以及压力、质量流速和壁面热流密度这三个参数对临界干度的影响规律。同时在实验数据的基础上,提出了一个适用于计算螺旋管内高压高含汽率工况下汽水两相流临界干度的经验关系式。     

The optical properties of the laser beam passed through a turbulent shear layer

The related fluid dynamic theory, experimental device and some preliminary results of the study of the optical properties of a laser beam passed through a turbulent shear layer are presented. The method of image processing for the determination of the optical density from a interferogram by means of a Microneye Bullet and a Microcomputer is also described.     

海气相互作用的若干时频特征

本文利用交叉谱分析方法分析了北大西洋、北太平洋以及印度洋六个海区与500百帕四个大气活动区之间的关系,揭示了它们之间的时空特点.进而分析了中低纬度海气相互作用的时频特点,并对三大洋副热带高压之间的相互关系进行了讨论,得到了一些有意叉的结果.这给利用海气关系进行长期天气过程分析提供了可靠依据。