Recyclable carbon fiber‐reinforced plastics (CFRP) containing degradable acetal linkages: Synthesis,properties, and chemical recycling

Two epoxy resins containing degradable acetal linkages were synthesized by the reaction of cresol novolak‐type phenolic resin (CN) with vinyl ethers containing a glycidyl group [cyclohexane dimethanol vinyl glycidyl ether (CHDMVG) and 4‐vinyloxybutyl glycidyl ether (VBGE). Carbon fiber‐reinforced plastics (CFRPs) were prepared by heating laminated prepreg sheets with CN‐CHDMVG resin (derived from CN and CHDMVG) and CN‐VBGE resin (derived from CN and VBGE), in which carbon fibers are impregnated with epoxy resins containing curing agents [dicyandiamide (DICY)] and curing accelerator [3‐(3,4‐dichlorophenyl)‐1,1‐dimethylurea (DCMU)]. CN‐CHDMVG‐based CFRPs and CN‐VBGE‐based CFRPs exhibited almost the same tensile strength as the conventional bisphenol‐A‐based CFRPs. CN‐CHDMVG‐based CFRPs and CN‐VBGE‐based CFRPs underwent smooth breakdown with the treatment of hydrochloric acid in tetrahydrofuran at room temperature for 24 h to regenerate strands of carbon fibers. The surface conditions of the recovered carbon fibers had little changes during degradation and recovery processes on the basis of scanning electron microscopy (SEM) and X‐ray photoelectron spectroscopy (XPS). The recovered carbon fibers exhibited almost the same tensile strength as virgin carbon fibers and hence would be reused for the production of CFRPs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1052–1059     

The Morphology and Mechanical Properties of Isotactic Polypropylene Injection-Molded Samples with the Presence of β-Nucleation Agent and Periodical Shear Field

The pressure vibration injection molding (PVIM) method was used to prepare β-nucleated isotactic polypropylene samples (PVIM β-iPP samples); a relatively low, periodical shear was imposed on the polymer melt in the mold at the filling and packing stages. The crystal structures and crystal orientation of the PVIM β-iPP samples were investigated by polarizing light microscopy (PLM), scanning electron microscopy (SEM), and synchrotron two-dimensional wide-angle X-ray diffraction (2D-WAXD). The PLM observations indicated that a cylindrite layer, rather than the transition layer, was found in PVIM β-iPP samples, which is different from the conventional injection-molded (CIM) samples. In addition, the thickness of the oriented layer of the PVIM samples was obviously greater than that of the CIM samples. The SEM observations demonstrated that a large amount of shish-kebab structures appeared in the shear layer of the PVIM β-iPP samples; at the same time, numerous β-spherulites were formed in the core layer. The 2D-WAXD data indicated that orientation homogeneity, to some degree, could be obtained by the periodical shear during PVIM. As a result, the above-mentioned morphology of the PVIM β-iPP samples leads to potentially useful prominent reinforcement and toughening of the material.     

Simultaneously reinforce and toughen polypropylene by in‐situ introducing polylactic acid microfibrils

A petroleum‐based polymer, isotactic polypropylene (iPP), and a biodegradable polymer, poly(lactic acid) (PLA), were compounded and molded into parts through the micro‐injection technique. A systematic structural investigation indicated that the microfibrillation of PLA minor phase depended on the operation parameter of inter‐mixer, ie, rotor speed. The higher rotor speed, the lower viscosity ratio of the PLA/iPP pair was favorable for microfibrillation occurred during micro‐injection process. The PLA microfibrils with high aspect ratio was successfully introduced into iPP matrix, and the tensile strength and strain at break of iPP/PLA blends were simultaneously improved. This study suggests a promising method for designing special microfibrillar morphology in polymer blend by using conventional melt processing techniques.     

Enthalpic relaxation of silica–polyvinyl acetate nanocomposites

Although the effects of filler nanoparticles size and surface treatment on the glass transition temperature of the matrix phase have received well-deserved attention, nanofiller effects on other physical parameters associated with the glass transition have received less interest. To better understand how the incorporation of nanofillers affects the enthalpic relaxations associated with the glass transition, differential scanning calorimeter measurements were carried out on silica–polyvinyl acetate nanocomposites with respect to filler content, annealing temperature, and annealing period. As expected, longer annealing periods below the glass transition temperature resulted in an increase of the subsequent enthalpic relaxations. However, the presence of filler substantially reduces the enthalpic relaxation relative to that of the neat polymer at longer annealing periods only. The underlying enthalpic relaxations and the effects suppressed by the fillers are specific to the annealing temperature. These results suggest a significant alteration in the physical state of the matrix because of the presence of the filler particles. However, this does not imply the existence of a glassy layer or layers with a glass transition gradient near the filler surface. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2733–2740, 2008     

Insights into the Reinforcement of Butyl Rubber by Carbon Black and Silica with the Aid of Their Dynamic Properties

Carbon black (N234) and silica (Vulksail N) with a silane coupling agent Si-69 were chosen as reinforcing fillers in butyl rubber (IIR). The rheological behavior of the IIR compounds and the dynamic mechanical properties of IIR vulcanizates were investigated with a rubber processing analyzer and dynamic mechanical analysis (DMA) to examine the filler dispersion in the rubber matrix and the interaction between filler and matrix. The data indicated that the N234 filled IIR compounds had more filler networks than those filled with silica. Filler networks first appeared at 30 phr N234 and 45 phr silica with silane coupling agent Si-69. The interaction between N234 and IIR was far stronger than that between silica and IIR. However, the silica Vulksail N filled IIR had better wet-grip and lower rolling resistance compared to the carbon black-filled IIR should IIR be chosen as a substitute of styrene-butadiene rubber (SBR) in tire tread. The reinforcing factor, R, R (related to the difference in tan d peak height at T_g for the filled and nonfilled rubbers), also demonstrated that the N234-IIR interaction was stronger than for the silica. IIR with 30 phr N234 exhibited the largest tensile strength, 20.1 MPa, for those vulcanizates examined. The tensile and tear strengths of N234 filled IIR were higher than those of IIR with similar amounts of silica. Thus, it was concluded that N234 is a more active reinforcing filler in IIR than silica (Vulksail N) even with a silane coupling agent (Si-69).     

In-situ nanoelectrospray for high-throughput screening of enzymes and real-time monitoring of reactions

The in-situ and high-throughput evaluation of enzymes and real-time monitoring of enzyme catalyzed reactions in liquid phase is quite significant in the catalysis industry. In-situ nanoelectrospray, the direct sampling and ionization method for mass spectrometry, has been applied for high-throughput evaluation of enzymes, as well as the on-line monitoring of reactions. Simply inserting a capillary into a liquid system with high-voltage applied, analytes in liquid reaction system can be directly ionized at the capillary tip with small volume consumption. With no sample pre-treatment or injection procedure, different analytes such as saccharides, amino acids, alkaloids, peptides and proteins can be rapidly and directly extracted from liquid phase and ionized at the capillary tip. Taking irreversible transesterification reaction of vinyl acetate and ethanol as an example, this technique has been used for the high-throughput evaluation of enzymes, fast optimizations, as well as real-time monitoring of reaction catalyzed by different enzymes. In addition, it is even softer than traditional electrospray ionization. The present method can also be used for the monitoring of other homogenous and heterogeneous reactions in liquid phases, which will show potentials in the catalysis industry.     

Opinion strength influences the spatial dynamics of opinion formation

Opinions are rarely binary; they can be held with different degrees of conviction, and this expanded attitude spectrum can affect the influence one opinion has on others. Our goal is to understand how different aspects of influence lead to recognizable spatio-temporal patterns of opinions and their strengths. To do this, we introduce a stochastic spatial agent-based model of opinion dynamics that includes a spectrum of opinion strengths and various possible rules for how the opinion strength of one individual affects the influence that this individual has on others. Through simulations, we find that even a small amount of amplification of opinion strength through interaction with like-minded neighbors can tip the scales in favor of polarization and deadlock.     

In situ composites based on blends of PEEK and thermotropic liquid crystalline polymer

A series of blends were prepared by mixing pellets of the thermotropic liquid crystalline polymers (TLCP) with poly (ether ether ketone)(PEEK) in the dry state under injection mouldingmolding conditions. The mechanical properties of blends were measured, and it is proved that the mechanical properties of blends are better than those of their matrix. Compared with the thermoplastic matrix, the tensile modulus and strength of the blends increased obviously, with the addition of only 2 wt% LCP. At the same time, the addition of TLCP decreased the melt viscosity of the blends.     

Models for the Investigation of the Structure of Vulcanizates

For the investigation of vulcanizates structure, new models have been developed relating the modulus of vulcanizates and the volume fraction of filler. The parameters of the models are the filler distribution and the properties of the shell surrounding the filler particles. Three functions of filler distribution have been assumed. Dynamic mechanical properties of a series of vulcanizates were tested and the parameters of the models were computed. The obtained data allows estimating the properties of the shell formed around filler particles in vulcanizates and to distinguish the functions of filler distribution.     

A Learning Algorithm for the Control of Continuous Action Set-Point Regulator Systems

The convergence properties for reinforcement learning approaches, such as temporal differences and Q-learning, have been established under moderate assumptions for discrete state and action spaces. In practice, however, many systems have either continuous action spaces or a large number of discrete elements. This paper presents an approximate dynamic programming approach to reinforcement learning for continuous action set-point regulator problems, which learns near-optimal control policies based on scalar performance measures. The continuous-action space (CAS) algorithm uses derivative-free line search methods to obtain the optimal action in the continuous space. The theoretical convergence properties of the algorithm are presented. Several heuristic stopping criteria are investigated and practical application is illustrated by two example problems—the inverted pendulum balancing problem and the power system stabilization problem.