Is It Worth the Effort to Reinforce Polymers With Carbon Nanotubes?

Carbon nanotubes (CNTs) show exceptional properties that render them attractive for incorporation in a new generation of high‐performance engineering composites with tailored properties. While a great deal of work has been done toward using CNTs as a reinforcing agent in polymer composites, the full potential of CNTs has yet to be reached. In this work, two case studies were proposed in order to analyze the effectiveness of CNTs and carbon fibers (CFs) as reinforcing agents. Micromechanics models for the stiffness and strength of hybrid composites, comprising CNTs and CFs are derived by considering the concept of effective fiber. In addition, the 2009 prices of commercially available CNTs are reviewed. The strongest, the stiffest, and the cheapest CFs commercially available are compared with single walled CNTs (SWCNTs) and multiwalled CNTs (MWCNTs). The simulated results from the micromechanics models show that the use of CFs makes the acquisition of composites with maximum tensile strengths of 4.18 GPa possible. Analysis of the cost versus property relation showed that CNTs are the most viable strengthening option for achieving composites with strengths of up to 11.61 GPa. It is also shown that CFs are the most viable stiffening option, making composites with Young's moduli of up to 383 GPa possible at the expense of the material's toughness. Moreover, it is shown that, in order to achieve CNT's true potential, several challenges have to be faced. CNTs have to be produced with higher purity, longer lengths, better integrity, in larger amounts, and at lower cost. Moreover, issues such as orientation of the CNTs, their concentration, interfacial adhesion, distribution, and dispersion have to be overcome.

     

带时间窗的车间搬运机器人路径优化建模及算法研究

本文以车间搬运机器人为研究对象,在考虑时间窗的前提下,求解机器人进行物料配送和成品回收场景下的路径优化问题。提出一种强化学习遗传蚁群算法,首先利用扫描法求解初始搬运机器人的数量,并将子路径节点的几何中心设置为虚拟节点,利用嵌入遗传算子的蚁群算法求解连接虚拟节点的最优路径,再利用强化学习算法求解子路径的最优结果;最后将基本成本、运输成本和时间惩罚成本的加权和作为目标解,并最终求出满足约束条件的最优解。通过与基准问题求解结果对比,验证了强化学习遗传蚁群算法的优越性。     

Electron paramagnetic resonance investigation of molecular bond rupture due to ozone in deformed rubber

Electron paramagnetic resonance (EPR) provides a sensitive tool by which microscopic bond rupture can be monitored simultaneously with observations of macroscopic deformation and failure. Past techniques for studying fracture in semicrystalline polymers have been extended to investigate degradation of unfilled ruber in the presence of ozone. It was found that the rate of free radical production was linearly proportional to stretch ratio and ozone concentration and that stress relaxation and creep were not directly proportional to this production rate. The latter behavior was attributed to the particular dependence of crack density and growth on stress. It was concluded that at low strains, comparatively few surface cracks form; however, at higher strains, many more crack centers become active. Although many more surface cracks are present, they do not progress into the material as rapidly. Therefore, although more bonds were broken at higher strains and stresses, the stress relaxation rate and creep rates were not significantly increased.     

Effect of Carbon Black Nature on Vulcanization and Mechanical Properties of Rubber

The influence of the basic properties of carbon black, such as structure, panicle size, and surface activity on the vulcanization and mechanical properties of filled natural rubber compounds was investigated in detail. This is important for a better understanding of the rubber performance and the mechanism of reinforcement. In particular, the effect of carbon black surface activity, which was changed by introducing one kind of hindered amine light stabilizer on rubber reinforcement is emphasized.     

Study on the Reinforcing Effect of Milled Carbon Fibers in a Natural Rubber Based Composite

Milled carbon fibers (MCF) have been tested at 2, 4, and 6 phr in a standard natural rubber compound with 45 phr of N375 carbon black. A dramatic increase in the low elongation moduli was observed even with only 2 phr of MCF. The presence of MCF confers anisotropic properties to the rubber compounds that can be measured by an anisotropic factor σ, defined as the ratio between the modulus parallel to the MCF prevalent direction over the modulus orthogonal to the MCF prevalent direction. It has been shown that the presence of MCF is able to reduce the mechanical hysteresis and also the compression set of the natural rubber compound. However, the tear strength properties are affected negatively. The present study demonstrates the feasibility and the advantages derived by the utilization of the carbon fibers as extra reinforcing filler in rubber compounds.     

Performance and Mechanism of Epoxy Resin for Reinforcement of Styrene–Butadiene Rubber

Styrene–butadiene rubber (SBR) vulcanizates reinforced by epoxy resin (EP) have been synthesized by an in-situ vulcanization and curing process. The influences of synthetic parameters, such as the contents of EP, carbon black, and types of compatilizers, on the microstructures, vulcanization, and mechanical properties of SBR have been investigated. It was found that EP in SBR exists in the form of a fibrillar interpenetrating network, which is important for the enhancement of mechanical properties of SBR. The experimental results showed that when the percentage of EP was in the range of 10–20%, the composite materials had the best comprehensive performance. In comparison with pure SBR, the tear strength and the tensile stress at 300% elongation of SBR-EP composite were increased significantly. The method can be applicable for other rubber vulcanizates to improve their mechanical properties.     

A Comparative Study on the Reinforcing Effect of Aramide and PET Short Fibers in a Natural Rubber-Based Composite

Four types of chopped fibers have been studied as reinforcement additives in a standard natural rubber based, carbon black filled formulation. The fibers studied were aramide (2 types) and polyester (2 types). The chopped fibers were added on top of the carbon black filled rubber compound at 2, 4, and 8 phr levels. The extra reinforcing effect in the modulus, especially at low elongation, the increase in hardness, the anisotropic properties, and the stiffening effects have been studied together with the evaluation of the mechanical hysteresis in strain and in compression. The permanent set of the resulting rubber compounds have been evaluated as well. The best compromise in performances and price was found for a certain type of polyester fiber.     

泡沫铜基底原位生长的铜基导电金属有机框架作为双功能电催化剂

以泡沫铜为基底生长氢氧化铜纳米线,通过原位转化合成二维导电金属有机框架(MOF)材料Cu_3HITP_2(HITP=2,3,6,7,10,11-六氨基三亚苯)作为双功能催化剂,可直接用作析氧及氧还原反应的工作电极,而无需使用额外的基底或粘合剂,且无需后续热处理。研究发现以氢氧化铜纳米线为模板的Cu_3HITP_2表现出了更大的电化学比表面积,这种新型的电极可在碱性溶液(0.1和1.0 mol·L~(-1) KOH)中可以稳定运行,析氧反应中在电流密度达到10 mA·cm~(-2)时的过电位仅为1.53 V,超越了商业二氧化钌的催化性能。此外,该催化剂在氧还原反应中的半波电位达到0.75 V,优于大多数MOF材料。     

In-situ Reduction Synthesis of Bi/BiOI Heterostructure Films with High Photoelectrochemical Activity

The Bi/BiOI heterostructure films grew perpendicular to the FTO substrates were synthesized in-situ tlirough an electrochemical deposition and hydrogen reduction metliod. The metallic Bi nanoparticles were decorated onto the surface of BiOI nanosheets via an in-situ reduction, induced 6.3 times improvement of photocurrent density, compared to the pristine BiOI at 1.23 V vs. reversible hydrogen electrode(RHE).The enhancement of photoelectrochemical perfomiance was attributed not only to the efficient separation of charge resulted from surface plasmon resonance efleet, but also to the fast charge transfer at the interface due to the in-situ reduction of the films. This work provided a simple and facile strategy to in-situ construct heterostnicture films, and showed an effective metliod to improve the photoelectrochemical activity of Bi-based semiconductors.