手性丙烯酸酯液晶原位光聚合反应

手性丙烯酸酯液晶原位光聚合反应何流，张树范，金顺子，漆宗能，王佛松（中国科学院化学研究所北京１０００８０）关键词手性丙烯酸酯，原位光聚合，双折射，近晶相手性侧链液晶高分子显示近晶Ｓ！相，具有铁电性，在光电功能材料和非线性光学材料方面有潜在的应用前景’...     

Models for the Investigation of the Structure of Vulcanizates

For the investigation of vulcanizates structure, new models have been developed relating the modulus of vulcanizates and the volume fraction of filler. The parameters of the models are the filler distribution and the properties of the shell surrounding the filler particles. Three functions of filler distribution have been assumed. Dynamic mechanical properties of a series of vulcanizates were tested and the parameters of the models were computed. The obtained data allows estimating the properties of the shell formed around filler particles in vulcanizates and to distinguish the functions of filler distribution.     

Efficient Hybrid Photovoltaic Devices Based on in-situ Electrochemical Copolymerization of 3-Methylthiophene and Bithiophene into Pores of Nanocrystalline TiO2

Novel organic and inorganic hybrid photovoltaic devices were thbricated by in-situ electrochemical copolymerization of 3-methylthiophene（3MT） and bithiophene（BT） into the pores of nanostructured TiO2 sintered on fluorine-doped tin oxide（FTO） substrate. The photoactive layer was investigated by Fourier transform infrared（FTIR） spectroscopy, ultraviolet-visable（UV-Vis） spectrometer, scanning electron microscope（SEM） and cyclic voltammo- gram characterization. Device efficiency based on different molar feed ratios of 3MT and BT during electrochemical polymerization, and the effect of in-situ copolymer state（doped by electrolyte and de-doped） were measured and compared. Under the solar illumination of 100 mW/cm2（AM 1.5）, an optimized device efficiency of 0.938% was obtained when the molar ratio of 3MT to BT was 500：1, polymerization time was 500 s and the system was in doped copolymer state, respectively. The mechanism of overall photovoltaic parameter improvement was discussed.     

Preparation and Characterization of Cyclohexyl Moiety Toughened POSS-Reinforced Epoxy Nanocomposites

Polyhedral oligomeric silsesquioxane (POSS)-reinforced epoxy nanocomposites were prepared by reacting commercially available diglycidyl ether of bisphenol-A (DGEBA) and tetraglycidyl diamino diphenyl methane (TGDDM) epoxy resins with 1,1-bis(3-methyl-4-glycidyloxyphenyl)cyclohexane (Cy-Ep) separately and reinforced with POSS nanocluster. POSS (OAPS)-reinforced hybrid Cy-Ep-epoxy resin castings were characterized for their mechanical and morphological properties. The data obtained from mechanical studies indicated that the incorporation of nano OAPS into Cy-Ep modified hybrid systems results in improved stability. Among the epoxy systems studied, the TGDDM-based hybrid epoxy system exhibited higher values of tensile and flexural properties than that of the DGEBA hybrid epoxy system, whereas the impact strength of the DGEBA system was higher than that of the TGDDM system. The dispersion of POSS was confirmed by scanning electron microscopy and visual observation studies.     

原位聚合法制备聚酰胺/聚苯胺复合导电纤维

研究了原位聚合法制备聚酰胺/聚苯胺导电纤维,并对制备的复合纤维进行红外及光学显微镜测试,结果表明聚苯胺与纤维成功复合。对制备的复合纤维进行电导率测试,采用控制单一变量法探讨了苯胺单体在不同的条件下聚合对纤维电导率的影响,并讨论了反应温度对聚合过程和电导率的影响,得出最佳的工艺条件为:纤维经30%的甲酸溶液预处理20min,苯胺单体浓度为0.8M,氧化剂过硫酸铵浓度为1M,掺杂酸为盐酸,浓度为0.8M,冰水浴条件,反应时间为4h,得到的聚酰胺/聚苯胺导电纤维的电导率为3.7S/m。     

泡沫铜基底原位生长的铜基导电金属有机框架作为双功能电催化剂

以泡沫铜为基底生长氢氧化铜纳米线,通过原位转化合成二维导电金属有机框架(MOF)材料Cu_3HITP_2(HITP=2,3,6,7,10,11-六氨基三亚苯)作为双功能催化剂,可直接用作析氧及氧还原反应的工作电极,而无需使用额外的基底或粘合剂,且无需后续热处理。研究发现以氢氧化铜纳米线为模板的Cu_3HITP_2表现出了更大的电化学比表面积,这种新型的电极可在碱性溶液(0.1和1.0 mol·L~(-1) KOH)中可以稳定运行,析氧反应中在电流密度达到10 mA·cm~(-2)时的过电位仅为1.53 V,超越了商业二氧化钌的催化性能。此外,该催化剂在氧还原反应中的半波电位达到0.75 V,优于大多数MOF材料。     

A study on the preparation and characteristics of zeolite membrane PLOT column by in-situ synthesis

Summary The preparation of a zeolite membrane PLOT column by in-situ synthesis is described. The advantages of this new column are discussed. Some analytical applications to alkanes, arenes, esters, alkyl halides and ethers on the zeolite membrane PLOT column compared with those on a coated zeolite PLOT column are reported.     

现场热引发聚丙烯酸酯类电解质的性能及应用

应用热引发现场聚合方法制备聚丙烯酸酯类电解质,并考察其电化学性能.实验表明:该聚合物电解质具有 4. 5V的电化学稳定窗口,较高的室温电导率及良好的低温性能.当前驱体电解液中液态电解质含量为 85%时,其室温电导率为 3. 2×10-3S·cm-1, -30℃下的电导率达到 5. 6×10-4 S·cm-1.采用现场聚合技术制备的聚合物电池,其电化学性能与液态锂离子电池基本一致,首次充放电效率为 92. 1%, 1. 0C率放电容量为 0. 2C率的 95%, -20℃下的放电容量为室温容量的 72%,以 0. 5C率循环 300周后,仍保持初始容量的 85%以上.     

Preparation,Characterization of Ternary Europium Complex-Doped Thin Sol-Gel Hybrid Film by Fluorescence Spectroscopy

ernary europium complex with dibenzoylmethane(DBM), 1,10-phenanthroline(phen) was in-situ syn thesized in thin SiO₂/polyvinyl butyral(PVB) hybrid films by a two-step sol-gel process, characterized by means of fluorescence spectroscopy. The luminescence spectra, fluorescence lifetimes, photostability were all investigated. The results showed that the hybrid films exhibited the characteristic emission bands of the central rare earth Eu³⁺. In addition, Eu³⁺ presented longer fluorescence lifetime than in an ethanol solution, the complex had a higher photostability in the hybrid film than in the PVB film containing the corresponding pure complex.