DNA Separation by Capillary Electrophoresis with Ultraviolet Detection using Mixed Synthetic Polymers

The mixtures of two polymers, poly (N,N-dimethylacrylamide) (PDMA) and polyvinylpyrrolidone (PVP) were synthesized and used as the separation medium for double-stranded and single-stranded DNA fragments by capillary electrophoresis with UV detector. On optimal conditions, 2%w/v PDMA 2%w/v PVP can be used to separate the doublet 123/124bp in pBR322/Hae Ⅲ Markers.     

Determination of several sugars in serum by high-performance anion-exchange chromatography with pulsed amperometric detection

In this paper, a sensitive, simple and direct method for simultaneous determination of glucose, ribose, isomaltose and maltose in serum sample by high-performance anion-exchange chromatography coupled with integrated pulsed amperometric detection was developed. The four target analytes were easily and completely separated on an anion-exchange column at a flow-rate of 0.25 mL/min by binary step gradient elution in about 16 min and the two eluents were deionized water and 500 mM sodium hydroxide, respectively. The separated four analytes were detected directly by using a gold electrode and quadruple-potential waveform integrated pulsed amperometry without derivatization. Under the optimized conditions, when the injection volume was 25 microL, the detection limits (signal-to-noise ratio equal to 3) for glucose, ribose, isomaltose and maltose were 0.92, 7.50, 12.9 and 10.3 ng/mL, respectively. The calibration graphs of peak area for the four analytes were linear over two to three orders of magnitude with correlation coefficients greater than 0.998. R.S.D. of peak areas of the four analytes for five determinations were no more than 5.6%. The analytical method had been applied to the determination of glucose, ribose, isomaltose and maltose in real serum samples and good results with low relative standard deviation not more than 5.3% were obtained. The accuracy of the proposed method was tested by recovery measurements on spiked samples and good recovery results (98.1-107.9%) were obtained.     

Conducting polymer membranes for low activity potentiometric ion sensing

Conducting polymer (CP) films, used as ion-sensing membranes under open circuit potentiometric conditions, are usually characterised with rather high detection limit, in the range of 10⁻⁴-10⁻⁵ mol dm⁻³. This effect is unfavourable, not only from the point of view of CP applications in potentiometry as ion sensitive membranes, but also when these materials are used as ion-to-electron transducers (solid contacts) for ion-selective electrodes. The theoretical considerations presented underline the crucial role of spontaneous processes of polymer charging/discharging—the source of observed high detection limit of sensors comprising CP layer under zero current conditions. Although the mechanism of occurring process is different from that observed for plastic, solvent polymeric based ion-selective electrodes, the ultimate result—alteration of activity of electrolyte at the membrane/solution interface leading to elevation of the detection limit—is the same.The method of estimation of parameters characterising spontaneous charge transfer processes is presented. The values obtained can be used to calculate the resulting polymer/solution interface activity of electrolyte ions, thus the detection limit of CP membrane can be theoretically predicted.A method of lowering of the detection limit of conducting polymer membranes, applying galvanostatic polarisation to compensate the spontaneous process of polymer charging/discharging, is presented.The experimental results obtained for poly(pyrrole), poly(N-methylpyrrole) and poly(3,4-ethylenedioxythiophene) are in good accordance with predictions of the presented model.     

Simultaneous operation of plural separation modes in capillary electrophoresis with a chemiluminescence detector possessing a micro-space area for reaction/detection

Analysis of alpha-amino acids, proteins, and phenolic compounds was simultaneously performed using three capillaries in capillary electrophoresis with chemiluminescence detection, taking advantage of the micro-space area for reaction/detection at the tip of the capillary. The three capillaries included usual, polymer-containing, and sodium docley sulfate (SDS)-containing migration buffers for separation. The eluted samples from the capillaries, which were inserted into the chemiluminescence detection cell, were mixed with chemiluminescence reagent at the tips of the capillaries to generate visible light. The specific micro-space area for reaction/detection at the tips of the capillaries enabled the simultaneous operation of the three separation modes in the present system.     

Optimisation of a flow injection system with electrochemical detection using the desirability function: Application to the determination of hydroquinone in cosmetics

A procedure is proposed in which the determination of hydroquinone using a flow injection system with electrochemical detection is described. Size and coefficient of variation of the signal are optimised by a desirability function and a central composite design. The robustness of the optimum reached in the optimisation step is evaluated by means a Plackett-Burman design. The optimised FIA system is able to determine hydroquinone with a minimum detectable net concentration of 10 μg l⁻¹ with a false positive probability of 0.05 and a false negative probability less than 0.05. In samples of bleaching cream, the proposed procedure has a recovery of 102.2% with standard deviation of 4.4% and a relative error of 6.2%.     

Rapid measurement of fish freshness indices by an amperometric flow-injection system with a 16-way switching valve and immobilized enzyme reactors

A novel flow-injection system is proposed for the rapid measurement of the fish freshness indices K₁ and K₂: K₁=[([HxR+[Hx])×100/([IMP]+[HxR]+[Hx])] and K₂=[[Hx]×100/([HxR]+[Hx])], where [IMP], [HxR] and [Hx] are inosine-5′-monophosphate, inosine and hypoxanthine concentrations, respectively. For the estimation of index K₁, 5′-nucleotidase immobilized reactor and nucleoside phosphorylase (NP)/xanthine oxidase (XO) coimmobilized reactor were incorporated in series in the flow-injection line made up by a 16-way switching valve with two sample loops. For the estimation of index K₂, NP and XO immobilized reactors were also incorporated in the similar flow-line. Two sample portions passed through the flow-line with different residence times so that two peaks were obtained. The first and second peaks obtained in the K₁-determining system corresponded to the total of HxR and Hx and the total of Hx, HxR and IMP, respectively. Similarly, the first and second peaks obtained in the K₂-determining system corresponded to Hx and the total of Hx and HxR, respectively. Therefore, the indices K₁ and K₂ can be estimated by

where i₁ and i₂ present the peak current of the first and second peaks, respectively, and f the ratio of the peak currents of the first and second peaks for a Hx standard solution. A sea bream was selected as a model fish and it was stored at 4 °C after death. A good correlation was found between the index K₁ and the storage time over a period of 400 h, with a correlation coefficient of 0.992, but no correlation between the index K₂ and the storage time. The measurements could be performed at a rate of 22 samples per hour with satisfactory precision (0.6–1.2% R.S.D.), without calibration for each species, accurate weighing of fish meat and any interferences in fish meat.     

Analysis of microgram amounts of particulate material by simultaneous multiwavelength AES

A unique simultaneous emission spectrograph is utilized to perform qualitative and quantitative analysis on trace quantities of solid particulates. The atomic emission spectroscopic system consists of a direct current plasma source and an echelle spectrograph with a charge injection device detector, enabling the system to simultaneously measure the wavelength range from 220 nm to 520 nm with 0.02 nm resolution at 300 nm. Monitoring all wavelengths simultaneously allows the qualitative and quantitative determination of most major and minor constituent in a trace quantity of sample with little prior knowledge about the sample. The ability to perform qualitative and quantitative analysis on particulates is demonstrated by evaluating NBS certified coal fly ash, as well as a sample taken from the respirator air filter at an acute care unit in a hospital.Presented in part at the 1989 European Winter Conference on Plasma Spectrochemistry, Reutte, Austria     

标准气体在检测可燃气体报警器中的重要性

介绍可燃气体报警器的检测现状，分析可燃气体报警器检测元件中毒的原因，强调了检测可燃气体报警器时使用标准气体的重要性，以及标准气体的正确使用。     

非水体系毛细管电泳-紫外检测法测定苯甲酸和苯甲醛

建立了用非水相体系高效毛细管电泳-紫外检测法同时测定苯甲酸和苯甲醛的新方法，考察了运行电压、非水相介质和电解质等因素的影响，在25℃下，以V（乙腈）：V（碳酸丙烯酯）=1：1的混合液为溶剂，缓冲体系中含15mmol／L十六烷基三甲基溴化铵体积分数1％乙酸，重力进样30S，运行电压20kV，毛细管总长45cm有效长度30cm，φ75μm，检测波长285nm。苯甲酸线性范围为5～40μg／mL，线性方程为：Y=13．473ρ＋13．336，相关系数r=0．9985，检出限为0．92μg／mL，RSD为3．8％。苯甲醛的线性范围75～1125μg／mL线性方程为：Y=5．2449ρ＋564．01，相关系数r=0．9997，检出限为15．60μg／mL，RSD为3．5％。已用于经空气氧化后的苯甲醛中苯甲酸和苯甲醛的测定。