The preparation of nanophase tungsten carbide powder with zeolite-X catalysts

The reduction–carburization of tungsten trioxide (WO₃) under carbon monoxide flow was studied in the temperature range of 300–750 °C. The reduction–carburization of WO₃ was improved by mechanically mixing with zeolite-HX, -NaX and -KX. The interaction between cation in zeolite-X and oxygen in WO₃ affected the improvement of the reduction–carburization of WO₃ to WC. Moreover, the improved reduction–carburization of WO₃ could lead to the decrease of reaction temperature. Because the particle size of WC is in contact with a reaction temperature, the nanophase WC can be prepared at low temperature. In particular, the particle size of WC was controlled by reaction temperature. The particle sizes of produced WC at 550, 650 and 700 °C were 25, 50 and 100 nm respectively.     

数控高精度PWM调制特种电源

介绍了两种斯特林制冷机数控驱动源,分析了单极性驱动方式与双极性驱动方式对红外探测芯片产生的干扰情况,并根据与系统的联试比较了两种数控驱动源的优缺点.说明了数字滤波技术、PID控制算法及V/F转换电路在提高温控精度和减少电源对探测芯片干扰中的优势.     

Shape‐ and Trap‐Controlled Nanocrystals for Giant‐Performance Improvement of All‐Inorganic Perovskite Photodetectors

In the last few years, all‐inorganic perovskite CsPbBr₃ nanocrystals (NCs) have attracted tremendous attention for its high carrier mobility, long carrier diffusion length, excellent visible light absorption, and more importantly superior air stability. In fact, photodetectors (PDs) are designed and fabricated using the CsPbBr₃ NCs with very high performance. Herein, by optimizing the NC shape, size, and surface passivation, the CsPbBr₃ PDs are developed with an even higher performance. It is found that the PDs based on CsPbBr₃ nanoribbons show the best photoresponse among all common NC structures synthesized. Moreover, it is found that 6,6‐phenyl‐C61‐butyric acid ethyl ester can be used to passivate defects on the CsPbBr₃ nanoribbon surface and shows the charge transfer. As a result, the device displays superior photoresponsivity (R = 18.4 A W⁻¹), excellent signal‐to‐noise ratio, as high as 10⁴, and a very sharp rise/decay time (8.7/3.5 ms). The method demonstrated may offer an attractive strategy to improve sensitivity for all‐inorganic perovskite PDs in general.     

塑料光纤拉丝塔控制系统设计

为减小塑料光纤纤芯直径波动造成的非固有散射损耗,设计了一种新型光纤拉丝塔控制系统,详细阐述了其工作原理及软硬件实现过程。采用单片机作为核心处理部件,合理设计传感器测温电路、加热炉温度控制电路、直径测量和控制电路以及友好的人机界面。实验表明系统拉丝芯径范围宽(0.2～3mm),拉制光纤直径均匀,精度可控制在15μm以内。整个系统成本低,实用价值高,满足塑料光纤实验室研究需要,可供实际生产参考。     

Langevin dynamic simulation of hysteresis in a field-swept Landau potential

Numerical simulations are done of Langevin dynamics for a uniform-orderparameter, field-swept Landau model,= –|a/2|m ²+|b/4|m ⁴–mh(t) , to study hysteresis effects. The field is swept at a constant rateh(t)=h(0)+ht. The stochastic jump values of the field {h_J from an initially prepared metastable minimumm(0) are recorded, on passage to a global minimum m(). The results are: (a) The mean jump¯h _J(h) increases (hysteresis loop widens) with h, confirming a previous theoretical criterion based on rate competition between field-sweep and inverse mean first-passage time (FPT); (b) The broad jump distribution(h _J,h) is related to intrinsically large FPT fluctuations ( ²–²)/ ² O(1), and can be quantitatively understood. Possible experimental tests of the ideas are indicated.     

Synchronization between two different noise-perturbed chaotic systems with unknown parameters

In this paper, a general method of synchronizing noise-perturbed chaotic systems with unknown parameters is proposed. Based on the LaSalle-type invariance principle for stochastic differential equations and by employing a combination of feedback control and adaptive control, some sufficient conditions of chaos synchronization between these noise-perturbed systems with unknown parameters are established. The model used in the research is the chaotic system, but the method is also applicable to the hyperchaotic systems. Unified system and noise-perturbed RSssler system, hyperchaotic Chen system and nolse-perturbed hyperchaotic RSssler system are taken for illustrative examples to demonstrate this technique.[第一段]     

自适应遗传算法在光伏发电系统中的应用

针对光伏阵列在受到阴影遮挡时光伏发电系统总功率大幅下降的问题,采用分布式光伏阵列与光伏逆变器的群控方法,通过开关矩阵将多个光伏阵列与多台光伏逆变器相连,形成灵活多变的光伏发电网络拓扑结构,并根据该网络拓扑结构的工作原理,提出了相应的自适应遗传算法来实现分布式光伏阵列与光伏逆变器之间的群控管理.仿真及实验结果表明,光伏阵列受到阴影遮挡时,该算法使得光能的转换效率明显优于常规典型的分布式光伏发电方式,为有效利用光能提供了思路.     

Pragmatical generalized synchronization of chaotic systems with uncertain parameters by adaptive control

A new kind of generalized synchronization of two chaotic systems with uncertain parameters is proposed. Based on a pragmatical asymptotical stability theorem and an assumption of equal probability for ergodic initial conditions, an adaptive control law is derived so that it can be proved strictly that the common null solution of error dynamics and of parameter dynamics is actually asymptotically stable, i.e. these two identical systems are in generalized synchronization and the estimated parameters approach the uncertain values. It is called pragmatical generalized synchronization. Finally, two numerical examples are studied for two Quantum-CNN oscillator chaotic systems to show the effectiveness of the proposed generalized synchronization strategy with a double Duffing chaotic system as a goal system.     

Laser beam alignment by fast feedback control of both linear and angular drifts

A new way to enhance the directional stability of laser beams with alternating intensity by fast feedback control of both linear and angular drifts has been proposed for alignment of laser beams at higher accuracy. Both linear and angular drifts of laser beams, processed through light intensity modulation and primary alignment using single-mode optical fiber (SMOF), are separated using light path arrangement and detected using phase-lock technique, and are controlled using fast feedback control mechanisms according to their detected magnitudes, so that both linear and angular drifts are suppressed to enhance the directional stability of the emitting laser beams. Theoretical analyses and preliminary experimental results indicate that the approach proposed can be used to achieve an alignment accuracy of more than 10⁻⁸ rad.