Kriging‐based optimization applied to flow control

The automatic optimization of flow control devices is a delicate issue because of the drastic computational time related to unsteady high‐fidelity flow analyses and the possible multimodality of the objective function. Thus, we experiment in this article the use of kriging‐based algorithms to optimize flow control parameters because these methods have shown their efficiency for global optimization at moderate cost. Navier–Stokes simulations, carried out for different control parameters, are used to build iteratively a kriging model. At each step, a statistical analysis is performed to enrich the model with new simulation results by exploring the most promising areas, until optimal flow control parameters are found. This approach is validated and demonstrated on two problems, including comparisons with similar studies: the control of the flow around an oscillatory rotating cylinder and the reduction of the intensity of a shock wave for a transonic airfoil by adding a bump to the airfoil profile. Copyright © 2011 John Wiley & Sons, Ltd.     

Coexistence and harvesting control policy in a food chain model with mutual defense of prey

A model is proposed to understand the dynamics in a food chain (one predator‐two prey). Unlike many approaches, we consider mutualism (for defense against predators) between the two groups of prey. We investigate the conditions for coexistence and exclusion. Unlike Elettreby's (2009) results, we show that prey can coexist in the absence of predators (as expected since there is no competition between prey). We also show the existence of Hopf bifurcation and limit cycle in the model, and numerically present bifurcation diagrams in terms of mutualism and harvesting. When the harvest is practiced for profit making, we provide the threshold effort value that determines the profitability of the harvest. We show that there is zero profit when the constant effort is applied. Below (resp. above) , there will always be gain (resp. loss). In the case of gain, we provide the optimal effort and optimal steady states that produce maximum profit and ensure coexistence. Recommendations for resource managers As a result of our investigation, we bring the following to the attention of management:

• 1. In the absence of predators, different groups of prey can coexist if they mutually help each other (no competition among them).
• 2. There is a maximal effort to invest in order to gain profit from the harvest. Above , the investment will result in a loss.
• 3. In the case of profit from harvest, policy makers should recommend the optimal effort to be applied and the optimal stock to harvest. This will guarantee maximum profit while ensuring sustainability of all species.

     

Free boundary problem for a fully nonlinear and degenerate parabolic equation in an angular domain

This paper concerns with the problem of how to running an insurance company to maximize his total discounted expected dividends. In our model, the dividend rate is limited in $[0,M]$ and the company is allowed to transfer any proportion of risk by reinsuring. So there are two strategies which we call dividend strategy and reinsurance strategy. The objective function and the corresponding optimal two strategies are the solution and the two free boundaries of the following Barenblatt parabolic equation

$v_t?\underset{0\le a\le 1}{\max }?(\frac{1}{2}{a}^2{\sigma }^2{v}_{xx}+a\mu v_x)+cv?\underset{0\le l\le M}{\max }?[(1?v_x)l]=0$

under certain boundary conditions on an angular domain

$Q_T=\{(x,t)|0<x<Mt,0<t\le T\}.$

The main effort is to analyze the properties of the solution and the free boundaries to show the optimal decision for the insurance company.     

An improved generalized predictive control algorithm based on the difference equation CARIMA model for the SISO system with known strong interference

ABSTRACT

The single input single output (SISO) system with known strong interference is widely used in various occasions. Due to its strong interference, the control accuracy is hard to guarantee. To solve this problem, an improved generalized predictive control (IGPC) algorithm is developed. The IGPC firstly builds the difference equation CARIMA (Controlled Auto-Regressive Integrated Moving-Average) model of the SISO system and then treats the system as a two input single output (TISO) system and calculates its predictive vector, then transforms it into a SISO system and uses the TISO system predictive vector to calculate the SISO system control increment. A new parameter called phase coefficient is added to inhibit the control lag. Simulations are performed to make the comparison among the traditional GPC, PID control, velocity synchronization control (VSC), fuzzy adaptive PID control (FAPID), model-based robust PID control (BPID) and the IGPC. Results show that IGPC has best performance compared to the others. Finally, experiments are developed which proved that the IGPC algorithm has a higher accuracy in the SISO system with known strong interference than that of VSC.     

Plasma generation in silicon-based inductive grid arrays

Selective illumination of a silicon wafer can be used for the construction of non-permanent inductive grids. A numerical model is used for the calculation of plasma density distribution in silicon as a function of time. Some indicative results on the microwave properties of the device are presented.     

Probing defect species on real surfaces from the analysis of the spectral profile of admolecules

The analysis of changes in the vibrational spectrum of infrared active molecules adsorbed on a ionic surface containing point or extended defects can be an efficient method to determine the nature and density of surface defects. We study the infrared response of ammonia molecules deposited on a ionic surface of MgO containing charge vacancies and dipolar defects in various concentrations and distributions and show significant changes assigned to the defects signature. A Monte Carlo approach is used to randomly deposit the probe molecules on the surface displaying random or regularly arranged defects at low temperature.     

Practical synthesis of C1–8 fragment of autolytimycin via a chelation-controlled diastereoselective addition of diisopropenylzinc to α-methoxy aldehyde

The C1–8 fragment of autolytimycin was synthesized via a reliable 10-step route capable of delivering 41% overall yield at multi-gram scale. As a key step, a chelation-controlled isopropenylation of α-oxygenated aldehydes was established with a reagent combination of diisopropenylzinc, magnesium halide, and a dichloromethane/toluene mixed solvent. Cram-chelate isopropenylation products dominated for aldehydes with a small α-substituents, such as –OMe and –OBn groups, while the Felkin product could be obtained with a bulky –OTBS group.     

Direct Blue 71 staining as a destaining‐free alternative loading control method for Western blotting

In Western blotting, a suitable loading control is indispensable for correcting errors in the total amount of loaded protein. Immunodetection of housekeeping proteins and total protein staining have traditionally been used as loading control methods. Direct Blue 71 (DB71) staining—a novel, sensitive, dye‐binding staining method compatible with immunodetection—may offer advantages over these traditional loading control methods. Three common neuroscientific samples (human plasma, human oligodendrocytes, and rat brain) were employed to assess DB71 staining as a loading control method for Western blotting. DB71, CBB, one traditional housekeeping protein, and one protein of interest were comparatively assessed for reliability and repeatability and linear dynamic range over 2.5–40 μg of protein loaded. DB71's effect on the reliability and repeatability and linear dynamic range of immunoreaction were also assessed. Across all three sample types, DB71 was either equivalent or superior to CBB and housekeeping protein‐based methods in terms of reliability and repeatability and linear dynamic range. Across all three sample types, DB71 staining did not impair the reliability and repeatability or linear dynamic range of immunoreaction. Our results demonstrate that the DB71 staining can be used as a destaining‐free alternative loading control method for Western blotting.     

系留气球差压数据的三余度设计

鉴于气囊差压数据对系留气球压力调节的至关重要性,提出了一种差压数据的余度设计方法。在分析差压传感器组成特点的基础上,采用硬件双余度差压传感器配置实现了气囊差压数据的三余度设计,并给出了基于互比监控的故障判定逻辑和故障处置方法,以较低的成本大幅提高了系留气球差压测量的容错能力。