交变暨静态剪切流对湍流抑制的互斥性分析

把剪切流对湍流抑制的解析理论应用于同时包含静态剪切流和周期交变剪切流的情况。所得到的结果表明：当两者单独存在时对湍流有定量上大体相同的抑制效应;当两者同时存在时对湍流的抑制效应不仅不是简单的迭加,反而在很大的区域上呈现互相削弱的趋势,特别是这种互斥性在两种剪切流强度相等时为最大。这与Maeyama等人的数值模拟结果相符合-。采用的渐近理论平均法表明导致两种剪切流在抑制湍流上不对等是由交变剪切流与它所诱发的交变相对位移之间的耦合所造成。     

开口薄壁梁的扭转理论与应用

以Vlasov薄壁构件理论为基础, 推导了开口薄壁构件一阶扭转理论. 该理论考虑了翘曲剪应力对截面转角的影响, 截面的转角分为自由翘曲转角和约束剪切转角, 在约束扭转中, St.Venant扭矩仅仅与自由翘曲转角有关, 而翘曲扭矩仅与约束剪切转角有关. 利用半逆解方法求出了约束扭转中薄壁构件的St.Venant扭矩表达公式; 依据能量方法, 建立了约束剪切转角和翘曲扭矩之间的关系, 并提出了翘曲剪切系数概念, 给出了一阶扭转理论的微分方程. 为了有效求解微分方程, 给出了求解微分方程的初参数法方程和相应的影响函数矩阵; 当St.Venant扭矩可以忽略时, 得到与一阶弯曲理论(Timoshenko梁理论)相似的一阶扭转理论简化形式. 最后利用算例证明了一阶扭转理论和简化理论的有效性.      

Hydromagnetic flow through uniform channel bounded by porous media

The combined effects of the magnetic field, permeable walls, Darcy velocity, and slip parameter on the steady flow of a fluid in a channel of uniform width are studied. The fluid flowing in the channel is assumed to be homogeneous, incompressible,and Newtonian. Analytical solutions are constructed for the governing equations using Beavers-Joseph slip boundary conditions. Effects of the magnetic field, permeability,Darcy velocity, and slip parameter on the axial velocity, slip velocity, and shear stress are discussed in detail. It is shown that the Hartmann number, Darcy velocity, porous parameter, and slip parameter play a vital role in altering the flow and in turn the shear stress.     

Dispersion equation of magnetoelastic shear waves in irregular monoclinic layer

This paper studies the propagation of horizontally polarized shear waves in an internal magnetoelastic monoclinic stratum with irregularity in lower interface. The stratum is sandwiched between two magnetoelastic monoclinic semi-infinite media. Dispersion equation is obtained in a closed form. In the absence of magnetic field and irregularity of the medium, the dispersion equation agrees with the equation of classical case in three layered media. The effects of magnetic field and size of irregularity on the phase velocity are depicted by means of graphs.     

Elastoplasticity of crack loaded by two pairs of isolated shear forces in finite width plate

The failure behavior of an elastic-perfectly plastic body with a crack loaded by two pairs of concentrated shear forces is discussed. The analytical solutions of an eccentric crack in a finite plate loaded by two pairs of point shear forces are obtained. It includes the unit normal vector of the elastic-plastic boundary near the crack line, the elastic-plastic stress fields near crack line and the law of the plastic zone along the crack line with external loads. The solutions of this paper are sufficiently precise near the crack line in elastic-perfectly plastic materials. Subsequently, the present results are compared with solutions based on the minimum strain energy density theory and elastic-plastic solutions under small scale yielding condition. On the basis of the minimum strain energy density (SED) theory, the minimum values of SED in the vicinity of the crack tip are determined, the initial growth orientation of crack are determined. It is found that the normalized load under large scale yielding condition is higher than those under small scale yielding condition when the length of the plastic zone is the same.     

A new finite element of spatial thin-walled beams

Based on the theories of Timoshenko＇s beams and Vlasov＇s thin-walled members, a new spatial thin-walled beam element with an interior node is developed. By independently interpolating bending angles and warp, factors such as transverse shear deformation, torsional shear deformation and their Coupling, coupling of flexure and torsion, and second shear stress are considered. According to the generalized variational theory of Hellinger-Reissner, the element stiffness matrix is derived. Examples show that the developed model is accurate and can be applied in the finite element analysis of thinwalled structures.     

压缩剪切测试中载荷传递行为的数字光弹性研究

结合光弹性四步彩色相移法,提出改进的六步相移法来计算全场剪应力,对径压缩圆盘实验证实了该方法的正确性,并进一步研究了同质材料连接结构在压缩剪切测试中的层间剪切行为。实验结果表明:全场等色线条纹级数和剪应力连续分布且随载荷而增加;中线附近剪应力趋于零,而条纹级数为峰谷。在连接界面上的条纹级数和剪应力出现峰值,特别是在连接界面端部为最高,在最大载荷下可分别达3.5级和2.4MPa,是导致连接界面脱粘开裂的危险区域。连接结构通过层间剪应力进行应力传递,在连接界面上剪应力与外载基本保持平衡。     

???????????????????????????????????

对于连续截面直梁平面横力弯曲情形, 分析了剪切变形引起横截面翘曲的影响. 基于位移模式假定, 用材料力学方法得到相应的正应力与切应力表达式, 并以均布力作用的矩形截面简支梁为例说明截面翘曲对于应力的影响. 该分析方法及其结果适用于材料力学教学.     

Evaluation of both composition and strain distributions in InGaN epitaxial film using x-ray diffraction techniques

The composition and stain distributions in the InGaN epitaxial films are jointly measured by employing various x-ray diffraction (XRD) techniques, including out-of-plane XRD at special planes, in-plane grazing incidence XRD, and reciprocal space mapping (RSM). It is confirmed that the measurement of (204) reflection allows a rapid access to estimate the composition without considering the influence of biaxial strain. The two-dimensional RSM checks composition and degree of strain relaxation jointly, revealing an inhomogeneous strain distribution profile along the growth direction. As the film thickness increases from 100 nm to 450 nm, the strain status of InGaN films gradually transfers from almost fully strained to fully relaxed state and then more In atoms incorporate into the film, while the near-interface region of InGaN films remains pseudomorphic to GaN.     

高层建筑风振时地基土材料阻尼比取值范围的初探

高层建筑风振响应分析中考虑土与结构相互作用后地基土的材料阻尼比幅值是多少,这是考虑土与结构相互作用对高层建筑结构风振响应有利还是不利的关键问题.通过对无桩基桩架-剪力墙结构的顺风向风振响应分析,发现考虑土-结构相互作用时结构基础底面土体的动剪应变幅值处于弹性应变范围,根据土动力学中土的动剪应变与土的阻尼比的关系,土体的材料阻尼比较小,其值不超过0.03,据此计算出相应的结构最大层间位移和结构顶层的最大加速度比将地基视为刚性的结构有较大增长;因此,在高层结构风振响应分析中应考虑土-结构相互作用的影响.文章通过实例分析给出无桩基高层建筑土体材料阻尼比的建议值,该研究为有桩基高层建筑的土体材料阻尼比的计算提供了借鉴.