硼掺杂还原态氧化石墨烯催化剂的制备及其蒽催化加氢性能的研究

制备了一系列硼掺杂的还原氧化态石墨烯催化剂并应用于蒽加氢反应。结果表明，随着催化剂处理温度的升高，催化剂中有序碳结构会发生变化，硼会取代材料骨架中的碳，进而影响蒽和氢气的吸附活化。经硼改性后，催化剂对蒽加氢反应表现出了很高的加氢活性，蒽的最高转化率可达97%，深度加氢产物八氢蒽的最高选择性可达19%。     

PHEMA hydrogels obtained by a novel low-heat curing procedure with a potential for in situ preparation

In this work, we report on poly(2-hydroxyethyl methacrylate) (PHEMA) hydrogels obtained by a low heat curing reaction. These materials are suitable for in situ preparation and therefore endowed with a potential for several biomedical applications. The novel procedure adopted involves as the first step the synthesis of a soluble oligomeric PHEMA precursor containing polymerizable functions as side substituents. As the second step, the precursor is dissolved in equal amounts of 2-hydroxyethyl methacrylate (HEMA) and water, to form a viscous but still injectable syrup. A low temperature water soluble initiator is then added. The curing reaction starts promptly and is completed within few minutes. During the entire process the internal temperature never rises above 40 degrees C. Preliminary mechanical characterizations performed on the hydrogels in their water-swollen state and diffusion tests in absorption/desorption experiments clearly indicated that on all respects the novel hydrogels are comparable with conventional PHEMA hydrogels obtained according to literature from HEMA in the presence of divinyl crosslinkers. However, the much shorter curing time combined with the far lower curing temperature endow the new hydrogels with a higher potential in view of specific surgical requirements, and particularly for in situ preparation.     

Fluorescence quenching of anthropogenic fulvic acids by Cu(II), Fe(III) and UO(2)(2+)

The quenching of the fluorescence of three anthropogenic fulvic acids (FA) provoked by Cu(II) (pH 6.0), Fe(III) (pH 4.0) and UO₂²⁺ (pH 3.5), was analyzed by a non-linear method and by Stern-Volmer plots. The FA samples were extracted from composted sewage sludges (csFA), composted municipal wastes (mwFA) and composted livestock wastes (lsFA). Synchronous-scan fluorescence (SyF) spectra were collected as a function of metal ion concentration. Spectral data were treated by a self-modeling mixture analysis method (SIMPLISMA) to detect the SyF spectral band with the strongest quenching and to calculate the corresponding quenching profile. The analysis of these profiles by a non-linear method allowed the estimation of conditional stability constants (K) and of the percentage of non-complexing fluorophores. The same quantitative information was obtained by the modified Stern-Volmer equation taking into account the existence of fluorophores that do not participate in the complexation. Good agreement was found between the results of the two procedures. The log K calculated by the non-linear method were (standard deviation in parenthesis): csFA, Cu(II), 4.22 (5); Fe(III), 5.0 (1); UO₂²⁺, 5.2 (2); mwFA, Cu(II), 4.21 (3); Fe(III), 5.6 (2); UO₂²⁺, 4.7 (3); lsFA, Cu(II), 4.51 (8); Fe(III), 5.5 (2); UO₂²⁺, 3.6 (2).     

PREPARATION OF POLY（METHYL METHACRYLATE）/LAYERED DOUBLE HYDROXIDES NANOCOMPOSITES via in situ SOLUTION POLYMERIZATION

An exfoliated layered double hydroxides/poly(methyl methacrylate)(LDHs/PMMA)nanocomposite was prepared by in situ solution polymerization of methyl methacrylate(MMA)in the presence of 4-vinylbenzenesulfonate intercalated LDHs(MgAl-VBS LDHs).MgAl-VBS LDHs was prepared by the ion exchange method,and the structure and composition of the MgA1-VBS LDHs were determined by X-ray diffraction(XRD),infrared spectroscopy and elemental analysis.XRD and transmission electron microscopy(TEM)were employed to examine the structure of LDHs/PMMA nanocomposite.It was indicated that the LDHs layers were well exfoliated and dispersed in the PMMA matrix.The grafting of PMMA onto LDHs was confirmed by the extraction result and the weight fraction of grafted PMMA increased as the weight fraction of LDHs in the nanocomposites increased.     

废水中偏二甲肼在Ni/Fe催化剂上的催化分解研究

研究了Ni/Fe催化剂对废水中偏二甲肼臭氧化分解的催化作用,考察了组分含量、体系的pH值和偏二甲肼初始浓度对催化反应的影响.结果表明,Ni/Fe催化剂对水中偏二甲肼的臭氧化具有良好的催化活性.催化剂组分含量、体系的pH值和初始浓度对反应的影响程度不大.对催化剂的XRD表征结果表明,催化剂主要由尖晶石结构的铁酸盐和FeNi3合金相组成,催化剂的良好催化性能与催化剂中尖晶石结构的铁酸盐和FeNi3合金相的形成有关.     

Selective Electroanalytical Assay for Cysteine at a Boron Doped Diamond Electrode

The electrochemical oxidation of the cysteine‐quinone adduct has been examined as a means of providing an electroanalytical cysteine specific detection protocol. The appliance of square‐wave voltammetry allowed 0.5 μM as a limit of detection. The effects of various biologically relevant interferences including other thiols were studied and found to present no change in the voltammetric profile. The practical applicability and efficiency of the methodology was probed through the determination of cysteine concentration in growth tissue medium.     

簇合物[Fe（DMF）6][W2S6]的合成,结构和性能研究

以(NH_4)_2WS_4、FeCl_3和NaS_2CNC_5H_(10)为原料,合成出[Fe(DMF)_6][W_2S_6]簇合物,用X射线衍射法测定了晶胞结构.其晶胞参数为a=0.8778(1)nm,b=0.9467(3)nm,c=1.1362(6)nm,α=71.506(1)°,β=74.775(2)°,γ=74.775(2)°,ν=0.84806nm~3,Z=1.晶体结构经块矩阵最小二乘法精修后,最终偏离因子R=0.0811.此外还进行了红外光谱、紫外可见光谱的测定.     

用MES及XRD研究FT合成催化剂的活性结构

采用穆斯堡尔谱及Ｘ光衍射法研究了共沉淀法制备的不同Ｆｅ／Ｍｎ比催化剂在焙烧、合成气还原及ＦＴ反应后体系相结构的变化。结果表明：锰助剂的加入使催化本相由铁磁性逐渐转化为超顺磁性，相应使催化剂还原逐渐难，Ｍｎ助剂促进了ＦＴ合成反应进行。反应性能与Ｆｅ／Ｍｎ尖晶石（Ｆｅ１－ｙＭｎｙ）３Ｏ４组成含量及式中ｙ大小密切相关，与ＭｎＣｏ３及ＭｎＯ的存在也有一定关系。富铁催化剂中Ｍｎ主要起电子助剂作用，而富锰催化     

现场表面拉曼光谱研究Fe-Mo合金诱导共沉积

现场表面拉曼光谱结果显示，在0．2mol·L-1Na2MoO4,pH＝4．0的溶液中，电位正于0．5V（vsSCE）时只观察到多钼酸盐的拉曼峰（940、880和450cm-1）．负于-0．5V时，出现中心位于730cm-1的宽峰．同时电极表面有蓝色膜生成．表明混合氧化态（MO（Ⅳ），MO（Ⅴ））氧化膜的形成．730cm-1的峰在-1．9V时仍然存在，说明氧化膜没有被进一步还原．在钼酸钠溶液中同时含有0．1mol·L-1FeSO4和0．2mol·L-1柠檬酸时，中间态氧化膜的拉曼峰的中心移到740cm-1．且峰强度随着电位从-1．3V负移到-1．9V而逐渐减弱并最终消失．电极表面沉积层呈银白色，说明由于Fe2 的存在，钼的中间态氧化膜的结构发生了变化，能够被进一步还原形成Fe－Mo合金，表现出诱导共沉积的特征．     

A Theoretical Study on the Conductivity of Carbon Doped BNNT

From the changes in energy band, density of state (DOS) and electronic structure calculated by the DFT/B3LYP method, the conductivity of carbon doped boron‐nitride nanotube (BNNT), which is formed by C‐C bond substituting B‐N bond, was discussed. The results indicate that the substitution will strengthen the conductivity of the tube, and its semi‐conductivity might be adjusted by controlling the substitution.