活泼配盐[(μ-RE)(μ-E′)Fe_2(CO)_6][Et_3NH][E,E′=S,Se]的亲电反应研究——蝶状Fe_2SSe及Fe_2Se_2簇合物的合成及表征

本文由［（μｔＢｕＳ）（μＣＯ）Ｆｅ２（ＣＯ）６］［Ｅｔ３ＮＨ］和硒粉形成的［（μｔＢｕＳ）（μＳｅ）Ｆｅ２（ＣＯ）６］［Ｅｔ３ＮＨ］，分别与溴化苄，二碘甲烷及邻一、间一、对一双（溴甲基）苯反应，合成了蝶状Ｆｅ２ＳＳｅ单簇物（μｔＢｕＳ）（μＰｈＣＨ２Ｓｅ）Ｆｅ２（ＣＯ）６（３ａ）和双簇物［（μｔＢｕＳ）Ｆｅ２（ＣＯ）６］２（μＳｅＺＳｅμ）［Ｚ＝ＣＨ２，ｏ．ｍ．ｐ双（亚甲基）苯］（４ａｄ）。类似地，由［（μＰｈＳｅ）（μＣＯ）Ｆｅ２（ＣＯ）６］［Ｅｔ３ＮＨ］和硫粉或硒粉所形成的［（μＰｈＳｅ）（μＳ）Ｆｅ２（ＣＯ）６］［Ｅｔ３ＮＨ］或［（μＰｈＳｅ）（μＳｅ）Ｆｅ２（ＣＯ）６］［Ｅｔ３ＮＨ］分别与对一双（溴甲基）苯反应合成了蝶状Ｆｅ２ＳＳｅ和Ｆｅ２Ｓｅ２双簇物［（μＰｈＳｅ）Ｆｅ２（ＣＯ）６］２［μＳ（ｐＣＨ２Ｃ６Ｈ４ＣＨ２）Ｓμ］（５ａ）及［（μＰｈＳｅ）Ｆｅ２（ＣＯ）６］２［μＳｅ（ＰＣＨ２Ｃ６Ｈ４ＣＨ２）Ｓｅμ］（５ｂ）。所有产物均经元素分析、ＩＲ和１ＨＮＭＲ表征。     

氟化γ-Al2O3表面酸性的NMR和FTIR表征

用红外光谱和核磁共振技术研究了氟化作用对γ-Al2O3的表面酸性（酸中心类型、强度及数量）的影响。吡啶和二甲基吡啶在氟化γ-Al2O3（F／γ-Al2O3）表面上吸－脱附的IR光谱和三甲基膦在F／γ-Al2O3表面上吸附的^31P MAS NMR结果表明，F／γ-Al2O3表面上既存在Lewis酸位又存在Broensted酸位。L酸的总量随氟含量的增加而减少。但其强度随之增加，且同时产生几种新的L酸位。B酸的数量和强度在样品含氟量为2％－3％间存在极大值。研究还表明，三甲基膦是一种测量F／γ-Al2O3表面酸性的灵敏的NMR探针分子，^31P MAS NMR和红外光谱的测试结果基本一致。同时，对氟化过程中酸位形成和变化机理进行了探讨。     

Preparation of flame retardant polyamide 6 composite with melamine cyanurate nanoparticles in situ formed in extrusion process

This paper is focused on in situ preparation of melamine cyanurate (MCA) nanoparticles from reaction of melamine (MEL) and cyanuric acid (CA) and their flame retardant polyamide 6 (PA6) composite in the extrusion process through a novel reactive processing method. Fourier transform infrared (FT-IR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and scanning electron microscopy (SEM) were utilized to characterize the in situ formed MCA nanoparticles and their blends with PA6. Introduction of pentaerythritol (LTP) and water-bound plasticizer dioctyl phthalate (DPT) into the extrusion reaction system greatly inhibits the evaporation of water required for melamine and cyanuric acid reaction at high temperature (higher than 180 °C), laying a foundation for successful in situ preparation of MCA through reactive processing. XRD and FT-IR measurements indicate that under the effect of pentaerythritol, dioctyl phthalate and water, melamine really reacts with cyanuric acid to in situ form MCA in extrusion process. The reaction degree is close to 100%. A very important finding through SEM is that the in situ formed MCA particles, which were found to have aspect ratio of about 7.5, radial size in the range of 70-300 nm (mostly 70-90 nm) and crystallite size of less than 22 nm, are uniformly dispersed in the matrix PA6 at nanoscale. The in situ formed MCA nanoparticles greatly improve the flame retardancy and the mechanical properties of flame-retarded PA6 materials, and the introduced plasticizer dioctyl phthalate also ameliorates the related impact property. The obtained flame-retarded PA6 materials have good comprehensive performance with flame retardancy UL-94 V-0 rating at 1.6 and 3.2 mm thickness, tensile strength 48.0 MPa, elongation at break 106.3% and Izod notched impact strength 8.92 kJ/m². Compared with flame-retarded PA6 material with in situ formed MCA, the one prepared through conventional blending of PA6 with commercial MCA product has improved tensile strength but deteriorated impact strength and flame retardancy.     

Structure of thiocyanate adlayers on Rh(111): an in situ STM study

In situ scanning tunneling microscopy (STM) was used to examine the structure of thiocyanate adlayers specifically adsorbed on Rh(111) in solutions of potassium hydroxide and perchloric acid, both containing potassium thiocyanate (KSCN). An atomically flat terrace-step structure was consistently observed on Rh(111) surfaces prepared by the flame-annealing-quenching method. The Rh(111)-(1 × 1) atomic structure was discerned on the atomically flat terrace even in the alkaline solution. High-resolution STM images disclosed two different structures of the SCN⁻ adlayers, () and (2 × 2), in the alkaline and the acidic media, respectively. In each structure, an individual adsorbed SCN⁻ ion appeared as a single spot with a constant corrugation height in STM images, suggesting that SCN⁻ ions adsorbed predominantly with their S-ends at particular bonding sites on Rh(111). The difference in the adlayer structure in the two solutions can be attributed to the interaction between adsorbed SCN⁻ and coadsorbed K⁺ in the alkaline solution, and is different from that between adsorbed SCN⁻ and H⁺ in the acidic solution. Received: 26 February 1997 / Accepted: 3 March 1997     

Anodic Stripping Voltammetry of Heavy Metals at Nanocrystalline Boron‐Doped Diamond Electrode

Boron‐doped Diamond (BDD) electrode has become one of the important tools for heavy metal detection. By studying some analytical parameters of DPASV method, like deposition time and potential in different electrolyte concentrations (acetate buffer), the conditions for detecting very low metal ion levels (Zn, Cd, Pb, and Cu) could be chosen. Diluted electrolyte (0.01 M buffer) was one of the factors favoring low detection and quantification limits, but its quantification range is short in comparison to more concentrated media. For ?1.7 V deposition potential, the detection of single metal at ppb levels was reached in 60 s deposition time. Understanding different metal‐metal interactions shows the limits to the simultaneous determination of heavy metals at BDD. Quantification was possible for the simultaneous determination of Zn, Cd and Pb despite the overlapping of Zn and Cd peaks. The performance of the BDD was compared with that of another C‐based solid electrode: the glassy carbon electrode (without mercury plating). A lower base line current, wider potential range, higher sensitivity (3 to 5 times higher than GC) and longevity of the material were noticed for the BDD.     

CATALYTIC BEHAVIOR OF DOPED MTiO_3 CATALYSTS FOR OXIDATIVE DEHYDROGENATION OF ETHANE

用Ｌｉ＋部分替代ＭＴｉＯ３（Ｍ＝Ｃａ、Ｓｒ）催化剂中的Ｔｉ４＋，明显地提高了乙烷氧化脱氢（ＯＤＨＥ）反应中乙烯的选择性。在ＣａＴｉ０．９Ｌｉ０．１Ｏ３－δ催化剂上，反应温度为８５０℃时，乙烯选择性为７７．４％，乙烷转化率为８１．７％。Ｌｉ掺杂的作用是增加了催化剂的Ｐ型半导性和未充分还原的氧物种数目。     

Properties of cerium-zirconium mixed oxides partially substituted by neodymium: Comparison with Zr-Ce-Pr-O ternary oxides

CeO₂ doped with praseodymium, neodymium and/or zirconium atoms were prepared by coprecipitation and by the sol-gel method. Structural properties were investigated by in situ XRD and Raman spectroscopy while oxygen storage capacity (OSC) was measured by transient CO oxidation. All the compounds, except pure Nd₂O₃, have a fluorite-type structure as well as a Raman band at 560 cm⁻¹ characteristic of the oxygen vacancies involving non-stoichiometric oxides. The lattice parameter under hydrogen, being dependent on the temperature, revealed two reduction mechanisms: one at a low temperature at the surface and another at a high temperature in the bulk. Ce-Nd binary oxides show a strong tendency towards crystallite aggregation, which reduces accessibility to gases and OSC properties. Zirconium improves the thermal resistance to sintering of both Ce-Nd and Ce-Pr oxides. The Zr-Ce-Pr-O followed by Zr-Ce-Nd-O compounds displaying high oxygen mobility at a low temperature, appear to be very promising for practical applications such as OSC materials.     

担载液相催化剂的研究——Ⅳ.催化剂的原位红外光谱表征

本文利用原位红外光谱方法对铑基担载液相催化剂(SLPC)在接近于实际反应条件下进行了表征。结果表明,新鲜催化剂上,铑膦络合物主要以二聚物的形式存在,如Rh_2(CO)_2(PPh_3)_4而在合成气或反应气氛中,催化剂铑膦络合物以单核络合物HRh(CO)_2(PPh_3)_2的形式存在。文中还对SLPC在CO,H_2,C_2-H_4,空气和HCl中处理时铑络合物种的变化进行了原位观察。实验结果表明,SLPC上活性铑络合物与对应的均相过程完全一致,进一步证实了SLPC催化在微观上就是一个均相催化过程。     

C(2×2)S/Fe(001)吸附体系的SCF-Xa-MS研究

采用SCF-X_α-MS方法, 对于C(2×2)S/Fe(001)吸附体系, 选择Fe_5S和Fe_9S两种原子簇模型, 研究了该吸附体系的电子结构、吸附成键特征及其相互作用图象。结果表明, S吸附于Fe(001)单晶表面具有较强的定域性质, S原子与底物Fe原子之间的吸附相互作用主要表现为S(3p)-Fe(4s,3d)之间的轨道相互作用。通过对表面吸附键长的优化, 其结果与X.S.Zhang等的ARPEFS的实验结果一致。     

ToF‐SIMS studies of the oxidation of Fe by D2O vapour: comparison with XPS

The oxidation of iron (Fe) by water (D₂O) vapour at low pressures and room temperature was investigated using time‐of‐flight (ToF) SIMS. The results supported those found previously using XPS and the QUASES^? program in that a duplex oxide structure was found containing a thin outer surface hydroxide (Fe(OD)₂) layer over an inner oxide (FeO) layer. The extraordinary depth resolution of the ToF‐SIMS profiles assisted in identifying the two phases; this resolution was achieved by compensation for surface roughness. A substantial concentration of deuterium was found in the subsurface oxide layer. This observation confirmed previous assessments that the formation of FeO was from the reaction of Fe(OD)₂ with outward‐diffusing Fe, leaving deuterium as a reaction product. Copyright © 2005 John Wiley & Sons, Ltd.