在位分散聚合聚甲基丙烯酸甲酯/二氧化硅纳米复合材料研究

应用在位分散聚合方法制备了分散相粒径介于１３０ｎｍ左右的聚甲基丙烯酸甲酯／二氧化硅ＰＭＭＡ／ＳｉＯ２纳米复合材料，并利用ＳＥＭ，ＤＭＡ，ＴＧＡ等手段研究了该体系的性能．结果表明，经表面处理的ＳｉＯ２无机填料在复合材料基体中分散均匀，界面粘结好．ＳｉＯ２填充粒子的用量对基体的热稳定性，动态力学行为，光学行为以及拉伸强度，弹性模量，断裂伸长率等力学性能都有较大影响     

Low Dimension Semiconducting Composite Nanomaterials

Recently, low dimension nanostructures have gained considerable attention due to their technological potential as unique types of nanoscale building blocks for future optoelectronic devices and systems. Semiconducting composite nanomaterials, which can combine the advantages of two or more components, have been the focus in the area of nanomaterials synthesis and device application.In this paper, we report our work on the preparation of composite nanomaterials based on CNTs.CNTs were coated by organic or inorganic species via novel and facile methods (Fig. 1 and Fig.2).These functional CNTs based composites show eminent prospects and opportunities for new applications in a wide variation of areas.     

氟化γ-Al2O3表面酸性的NMR和FTIR表征

用红外光谱和核磁共振技术研究了氟化作用对γ-Al2O3的表面酸性（酸中心类型、强度及数量）的影响。吡啶和二甲基吡啶在氟化γ-Al2O3（F／γ-Al2O3）表面上吸－脱附的IR光谱和三甲基膦在F／γ-Al2O3表面上吸附的^31P MAS NMR结果表明，F／γ-Al2O3表面上既存在Lewis酸位又存在Broensted酸位。L酸的总量随氟含量的增加而减少。但其强度随之增加，且同时产生几种新的L酸位。B酸的数量和强度在样品含氟量为2％－3％间存在极大值。研究还表明，三甲基膦是一种测量F／γ-Al2O3表面酸性的灵敏的NMR探针分子，^31P MAS NMR和红外光谱的测试结果基本一致。同时，对氟化过程中酸位形成和变化机理进行了探讨。     

Tribological properties of ormosil coatings

Transparent plastics are not scratch resistant. The damage leads to a loss of optical properties. Coatings prepared using either tetraethoxysilane or colloidal silica particles embedded in glymo is a way to avoid these disadvantages. Tribological experiments are carried out to better understand the surface modification due to a sliding friction. It is shown that the wear track is not directly related to usual mechanical properties such as Young's modulus and the hardness of the coating. The different stages leading to material loss are discussed in term of particle removal and debris circulation (accumulation or elimination) through the friction track. The mechanical properties of the film combined with the film to substrate adhesion are expected to play an important role as it can be deduced from results obtained as a function of the coating composition.     

A scratch-resistant single-layer antireflective coating by a low temperature sol-gel route

A novel quarterwave-thick narrow-bandwidth antireflective coating has been developed for both plastic and vitreous substrates by a sol-gel route. This coating has revealed pronounced scratch- and climatic-resistance under adverse conditions. The single-layer coating consists basically of a composite material made of silica as the discontinuous phase and of a polytetrafluoroethylene-derived (Teflon¹) organic polymer as the continuous phase. This leads to fluorine-containing colloidal silica product, or a so-called Flucosil coating. The coating is applied by spinning or dipping from specific solutions at room temperature followed by a mild and short heat treatment. In addition to remarkable abrasion and environmental resistance properties, such coatings have displayed excellent laser-induced damage threshold levels, surpassing uncoated substrates.We hope such a product might open new perspectives concerning household articles, architectural optical thin-films, ophthalmic uses, and so on.     

Preparation of flame retardant polyamide 6 composite with melamine cyanurate nanoparticles in situ formed in extrusion process

This paper is focused on in situ preparation of melamine cyanurate (MCA) nanoparticles from reaction of melamine (MEL) and cyanuric acid (CA) and their flame retardant polyamide 6 (PA6) composite in the extrusion process through a novel reactive processing method. Fourier transform infrared (FT-IR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and scanning electron microscopy (SEM) were utilized to characterize the in situ formed MCA nanoparticles and their blends with PA6. Introduction of pentaerythritol (LTP) and water-bound plasticizer dioctyl phthalate (DPT) into the extrusion reaction system greatly inhibits the evaporation of water required for melamine and cyanuric acid reaction at high temperature (higher than 180 °C), laying a foundation for successful in situ preparation of MCA through reactive processing. XRD and FT-IR measurements indicate that under the effect of pentaerythritol, dioctyl phthalate and water, melamine really reacts with cyanuric acid to in situ form MCA in extrusion process. The reaction degree is close to 100%. A very important finding through SEM is that the in situ formed MCA particles, which were found to have aspect ratio of about 7.5, radial size in the range of 70-300 nm (mostly 70-90 nm) and crystallite size of less than 22 nm, are uniformly dispersed in the matrix PA6 at nanoscale. The in situ formed MCA nanoparticles greatly improve the flame retardancy and the mechanical properties of flame-retarded PA6 materials, and the introduced plasticizer dioctyl phthalate also ameliorates the related impact property. The obtained flame-retarded PA6 materials have good comprehensive performance with flame retardancy UL-94 V-0 rating at 1.6 and 3.2 mm thickness, tensile strength 48.0 MPa, elongation at break 106.3% and Izod notched impact strength 8.92 kJ/m². Compared with flame-retarded PA6 material with in situ formed MCA, the one prepared through conventional blending of PA6 with commercial MCA product has improved tensile strength but deteriorated impact strength and flame retardancy.     

Structure of thiocyanate adlayers on Rh(111): an in situ STM study

In situ scanning tunneling microscopy (STM) was used to examine the structure of thiocyanate adlayers specifically adsorbed on Rh(111) in solutions of potassium hydroxide and perchloric acid, both containing potassium thiocyanate (KSCN). An atomically flat terrace-step structure was consistently observed on Rh(111) surfaces prepared by the flame-annealing-quenching method. The Rh(111)-(1 × 1) atomic structure was discerned on the atomically flat terrace even in the alkaline solution. High-resolution STM images disclosed two different structures of the SCN⁻ adlayers, () and (2 × 2), in the alkaline and the acidic media, respectively. In each structure, an individual adsorbed SCN⁻ ion appeared as a single spot with a constant corrugation height in STM images, suggesting that SCN⁻ ions adsorbed predominantly with their S-ends at particular bonding sites on Rh(111). The difference in the adlayer structure in the two solutions can be attributed to the interaction between adsorbed SCN⁻ and coadsorbed K⁺ in the alkaline solution, and is different from that between adsorbed SCN⁻ and H⁺ in the acidic solution. Received: 26 February 1997 / Accepted: 3 March 1997     

球形SiO2-Al2O3的制备、结构和性能

将Na2SiO3·9H2O 溶液通过强酸性阳离子树脂进行离子交换得到酸性硅溶胶,再将硅溶胶与铝溶胶及六次甲基四胺混合后采用油柱成型法制备了球形SiO2-Al2O3复合氧化物. 通过XRD、BET 及TPD等手段对样品进行测试和表征, 结果表明, 600 ℃焙烧得到的SiO2-Al2O3中SiO2以无定型形式存在, 其比表面、孔容与表面酸性随SiO2含量的增加而提高, 孔径、堆密度随SiO2含量的提高而减小, 压碎强度基本保持不变.     

复合Fe2O3纳米粒子的高分子微球的结构表征

近年来，复合有机、无机粒子的高分子微球及其特殊性质越来越引起人们的兴趣与关注［1］．获得有机、无机复合微球的方法很多，如在无机粒子存在下的乳液或无皂乳液聚会[2，3]，通过可聚合的表面活性剂在粒子表面形成胶囊化层[4]以及共沉淀法等[5]．这些无机粒子包括氧化钛、氧化铁、氧化铝及氧化硅等．Haga等[6]增发现包覆在聚合物粒子中的CdS与其本体的光电性质不同；单分散的聚合物微球可以在基片上被组装成二维乃至三维有序的结构[7]．这为信息存储、立体印刷等领域提供了新途径．因此，将无机粒子与聚合物复合成为功能化粒子是一项有…     

Luminescence Properties of Tb-Doped Yttrium Disilicate Prepared by the Sol–Gel Method

A sol–gel method for the synthesis of nanosized powders of yttrium disilicate doped with Tb^{3 +} is presented. The influence of grain size and annealing temperature on the structure and luminescence properties of the materials obtained has been investigated. The preparation of glass-ceramic composite has been also described. The effect of incorporating the nanocrystals into sol–gel silica glasses on their physicochemical properties has been shown and discussed. A lack of influence of the annealing above 1300°C on the lifetimes measured for the nanocrystals embedded in the glass, as compared to the Y₂Si₂O₇:Tb^{3 +} powders, has been observed.