锂锰尖晶石红外光谱的研究

本文对锂锰尖晶石的红外光谱进行了研究。由于锂锰尖晶石的晶体结构属于Fd3m空间群,锂离子占据四面体空隙(8a位置),锰离子占据八面体空隙(16d位置)。根据群论的知识,对锂锰尖晶石晶体中离子的振动方式与红外活性之间的内在关系进行了讨论。并列出了锂锰尖晶石的红外光谱实验数据。通过理论分析,我们推断:位于618.6和501.5cm~(-1)的红外吸收带分别来源于Mn(Ⅳ)-O和Mn(Ⅲ)-O键在晶体中的不对称伸缩振动(单元为Mn(Ⅳ)O_6和Mn(Ⅲ)O_6八面体),位于1124cm~(-1)的弱红外吸收带来源于Li-O键的不对称伸缩(单元为LiO_4四面体)。还有一些低于400cm~(-1)的可能吸收带在400～4000cm~(-1)范围内未能检测到。这一结论的可靠性通过锂锰尖晶石和掺杂的锂锰尖晶石的红外光谱实验数据得到证实。     

25MeV/u6He+9Be反应的轻粒子发射

在25MeV/u ⁶He与⁹Be靶的反应中,107°和128°处明显地观察到了轻粒子发射.粒子能谱形状与平衡热源蒸发相一致,分析得到热源的核温度为完全熔合条件下的5.6MeV或非完全熔合条件下的5.2MeV .实验发现发射氚的数量特别大,这可能与目前广泛研究的⁶He的集团结构和同位旋效应有关.     

用玻色子组态混合和玻色子表面δ相互作用研究核谱

用玻色子组态混合波函数和玻色子表面δ相互作用研究了三玻色子核⁴⁶Ti和⁵⁴Cr的sdgIBMI的能谱和E2跃迁概率,理论计算结果令人满意,比sdIBMI能拟合出更多的能级和E2跃迁概率,而且它们的误差更小. 说明g玻色子在振动区也起着重要的作用,同时进一步证明了这种玻色子组态混合模型是成功的.     

Gauge-invariant treatment of the exponential decay of an unstable atomic state

Summary By using a self-consistent projection-operator method, developed recently by the present author, a gauge-invariant Markovian treatment of the spontaneous decay of an unstable atomic state is presented. Without ignoring retardation and electron-spin effects a gauge-invariant result for the probability amplitude of finding the atom in the unstable state is obtained.     

红外光谱中溶剂效应机理初探——配位机制的提出

本文就红外光谱中溶剂效应机理提出了溶质和溶剂分子间的瞬时配位作用机制，认为同－溶质在不同溶剂中的振动波数不同，是由于这种瞬时配位作用改变了溶质价电子运动状态所致。据此提出了溶剂效砂的定量关系式，测定了七种溶剂配位效应常数。用这一套经验参数处理了几种取代苯甲酸的羰基伸缩振动的溶剂效应，得较好的线性关系。还发现羰基的振动波数与取代基的Ｈａｍｍｅｔｔ常数σ之间，羰基伸缩振动对溶剂效应的敏感度与σ之间，Ｈ     

Neue Spiroverbindungen aus Cyclophosphazenen und Cyclodi[phosphadiazan]en

New Spiro Compounds from Cyclophosphazenes and Cyclodi[phosphadiazanes] Chlorocyclophosphazenes (Cl₂P = N)₃ and (Cl₂p = N)₄ react with dihydrazidophosphoric acid derivatives in THF in the presence of triethylamine to give the spirocyclic compounds Cl₄N₃P₃(NHN(CH₃))₂P(S)OC₆H₅, Cl₆N₄P₄(NHNH)₂P(S)OC₆H₅. Constitutions have been confirmed by MS, NMR, IR and elemental analysis.     

Radical copolymerization of 2‐trifluoromethylacrylic monomers. II. Kinetics,monomer reactivities,and penultimate effect in their copolymerization with norbornenes and vinyl ethers

Radical copolymerizations of electron‐deficient 2‐trifluoromethylacrylic (TFMA) monomers, such as 2‐trifluoromethylacrylic acid and t‐butyl 2‐trifluoromethylacrylate (TBTFMA), with electron‐rich norbornene derivatives and vinyl ethers with 2,2′‐azobisisobutyronitrile as the initiator were investigated in detail through the analysis of the kinetics in situ with ¹H NMR and through the determination of the monomer reactivity ratios. The norbornene derivatives used in this study included bicyclo[2.2.1]hept‐2‐ene (norbornene) and 5‐(2‐trifluoromethyl‐1,1,1‐trifluoro‐2‐hydroxylpropyl)‐2‐norbornene. The vinyl ether monomers were ethyl vinyl ether, t‐butyl vinyl ether, and 3,4‐dihydro‐2‐H‐pyran. Vinylene carbonate was found to copolymerize with TBTFMA. Although none of the monomers underwent radical homopolymerization under normal conditions, they copolymerized readily, producing a copolymer containing 60–70 mol % TFMA. The copolymerization of the TFMA monomer with norbornenes and vinyl ethers deviated from the terminal model and could be described by the penultimate model. The copolymers of TFMA reported in this article were evaluated as chemical amplification resist polymers for the emerging field of 157‐nm lithography. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1478–1505, 2004     

Influence of preparation methods on structure and properties of PA6/PA66 blends: A comparison of melt‐mixing and in situ blending

The blends composed of polyamide 6 (PA6) and polyamide 66 (PA66) were obtained using two different preparation methods, one of which was the melt‐mixing through a twin‐screw extruder and the subsequent injection molding; and the other, the in situ blending through anionic polymerization of ε‐caprolactam in the presence of PA66. For the former, there existed a remarkable improvement in toughness but a drastic drop in strength and modulus; however, for the latter, a reverse but less significant trend of mechanical properties change appeared. Various characterizations were conducted, including the analyses of crystalline morphology, crystallographic form, and crystallization and melting behaviors using polarized optical microscopy (POM), wide‐angle X‐ray diffraction (WAXD), and differential scanning calorimetry (DSC), respectively; observation of morphology of fractured surface with scanning electron microscope (SEM); measurement of glass transition through dynamic mechanical analysis (DMA); and the intermolecular interaction as well as the interchange reaction between the two components by Fourier transform infrared spectrometry (FT‐IR) and ¹³C solution NMR. The presence and absence of interchange reaction was verified for the in situ and melt‐mixed blends, respectively. It is believed that the transreaction resulted in a drop in glass transition temperature (T_g) for the in situ blends, contrary to an increase of T_g with increasing PA66 content for the melt‐mixed ones. And the two kinds of fabrication methods led to significant differences in the crystallographic form, spherulite size and crystalline content and perfection as well. Accordingly, it is attempted to explain the reasons for the opposite trends of changes in the mechanical properties for these two blends. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1176–1186, 2007     

Auditory evoked responses: A tool to assess the fetal neurological activity

An intact auditory system at birth is requisite for the successful accomplishment of many developmental skills. Evoked responses to auditory stimuli have been used as a sensitive test to determine the functional status of the adult and neonatal brain. It has been established that fetuses can hear in utero and respond to external acoustic stimuli. We present an overview of the transmission of sound through the maternal abdomen to the fetal ear and the recordings of an auditory evoked response obtained from the fetus using a non-invasive magnetoencephalography technique. The investigation of cortical activity of the fetus in response to auditory stimulation can help understand and track the neurological development of the fetus.     

Evidence for the short-period oscillations in spin-resolved photoemission of thin Cr(110) films

The spin-resolved electronic structure of thin Cr overlayers on top of the Fe(110) surface was investigated by means of spin- and angle-resolved photoelectron spectroscopy. The initial fast drop of photoelectron spin-polarization at the Fermi level, followed by weak oscillatory behavior with the period of about 2 ML, can give an evidence for the first time spectroscopic observation of the short period oscillations in (110)-oriented thin Cr films.