PHASE INVERSION AND ITS MECHANICAL MODEL STUDIES FOR THE TWO-PHASE POLYMER BLEND SYSTEMS (Ⅱ)——DYNAMIC VISCOELASTIC RESPONSE

The dynamic viscoelastic response of the two-phase polymer blend systems shows the characteristics of the thermorheologically complex materials. In this paper theoretical equations for describing the dynamic viscoelastic response of such polymer blend systems have been established by means of the mechanical modeling technique. The dynamic viscoelastic response of the blend systems at any blend composition can be predicted theoretically by using the equations established, provided that the dynamic viscoelastic response of the two pure components and the mechanical model parameters are known in advance. Thus, we provide an effective method for studying the dynamic mechanical properties and the molecular relaxation characteristics of the two-phase polymer blend systems.     

低电流密度下恒电流法制备的聚苯胺修饰电极

研究了低电流密度下恒电流法制备的聚苯（ＰＡ）修饰电极的性质及其影响因素，探讨了低电流密度聚合的ＰＡ膜的优点。发现此种条件下聚合的ＰＡ膜具有较好的电荷传输能力，它不仅对Ｂｒ＾－，Ｔｌ＾＋／Ｔｌ等电对的氧化还原反应有更好的电催化活性，而且对Ｈ＾＋的Ｎｅｒｎａｓｔ响应也更接近理论值。     

LiCoO2中锂离子固相扩散系数随循环次数的变化

The solid diffusion coefficient of lithium-ion in LiCoO₂ cathode material has been investigated by the capacity intermittent titration technique (CITT) at different voltages and at different charge/discharge cycles. By SEM, XRD and FTIR techniques, the structure of LiCoO₂ was studied before and after charge-discharge cycles, and the relationship between solid diffusion coefficient and crystal structure was further discussed. CITT results show that the value of Li⁺ solid diffusion coefficient of LiCoO₂ is about 10^-12 cm²·s^-1. During the whole charge-discharge cycles, the Li⁺ solid diffusion coefficient decreased within the voltage of 4.0～4.3 V, which is attributed to the change of the structure of LiCoO₂.     

溶液酸度和反应温度对CaMoO4薄膜电化学制备的影响

本工作研究了恒电流电化学技术制备CaMoO₄薄膜工艺中，溶液酸度和反应温度对薄膜形成的影响。结果表明，酸度会影响薄膜的生长时间和光致发光特性，在较低酸度沉积薄膜时，容易造成薄膜的团簇生长和不确定相的形成；适当升高反应温度会加快晶粒的生长、提高薄膜的纯度、增加薄膜发射光谱的相对强度。在CaMoO₄薄膜电化学制备工艺中，溶液pH值控制在12.0附近和反应温度控制在60 ℃的左右比较好。     

自动化流动注射停流动力学分析仪的研制及其性能测试

本文研制了一套自动化流动注射停流动力学分析仪，该仪器由苹果Ⅱ型微机通过１２位ＡＤ／ＤＡ卡，流动注射停流控制仪及用ＢＡＳＩＣ语言编制的软件控制泵的起动和停止，试样的输送和混合，数据采集和处理，结果显示和打印，通过以铁（Ⅲ）与硫氰酸盐的反应体系采用固定时间法和以钒（Ｖ）的胶束催化反庆体系采用安始速法的现场测试证明，该仪器具有结构简单，操作方便，恒温性能好，通用性强等特点。     

脱蜡剂DF-1的气相色谱-傅里叶变换红外光谱联用分析

脱蜡剂ＤＦ－１是一种含多种有机成分的碳氢化合物，经气相色谱－红外光谱联用分析后，确定了这些组分的组成与含量。     

Fluorine containing poly(amide-imide)s: synthesis and formation of Langmuir-Blodgett monolayers

Soluble fluorine containing poly(amide-imide)s, PAI(1-4), were synthesized from diimide-dicarboxylic acid, 2,2-bis[N-(4-carboxyphenyl)-phthalimide-1,4-yl]hexafluoropropane with various diamines by direct polycondensation in N-methyl-2-pyrrolidone (NMP) containing CaCl₂ and using triphenyl phosphite and pyridine as condensing agents. The polymers were readily soluble in aprotic polar solvents such as NMP, N,N-dimethylacetamide, dimethyl sulfoxide and tetrahydrofuran. Their Langmuir monolayers were studied at the air/water interface. The monolayers were generally stable at the water surface and could be reproducibly transferred onto solid substrates to build up Langmuir-Blodgett (LB) multilayers. The LB mono- and multilayers were characterized by ultra-violet/visible spectroscopy (UV-Vis), surface plasmon resonance, atomic force microscopy.     

Three-way-output response system by electric potential: UV-vis, CD, and fluorescence spectral changes upon electrolysis of the chiral ester of tetracyanoanthraquinodimethane

The newly prepared tetracyanoanthraquinodimethane (TCNAQ) derivatives 1a,b with a chiral auxiliary are good electron acceptors and exhibit weak circular dichroism (CD) based on the absorption of TCNAQ. The twin-type electron acceptor 1c with two TCNAQ units shows larger ellipticity by exciton coupling. UV-vis, CD, and fluorescence spectra were changed drastically upon electrochemical reduction of 1c, which demonstrates the unprecedented three-way-output response system.     

Development of the FTIR properties of nano-structure silica gel doped with different rare earth elements,prepared by sol-gel route

Structural characteristics of pure silica gel (silica-xerogel, SiO₂) and silica gel doped with some rare earth elements (REEs) such as, praseodymium Pr³⁺, and Europium Eu³⁺, Erbium Er³⁺ and Holmium Ho³⁺ ions, with different concentrations ranging from 1 up to 6%, in the form of monolith materials were prepared by sol-gel technique, Using tetra-ethoxysilane as precursor materials, which are of particular interest for sol-gel integrated optics applications. Some structural features of sol-gel derived monolith are analyzed, namely the structure of nano-particle momolith samples, based on X-ray diffraction (XRD) and Fourier Transform Infrared (FTIR). We show that the XRD spectra of α-crystobalite are obtained for the pure samples at 1100°C and even by doping with the four REEs ions.