纤维素基磁性聚偕胺肟树脂的研究——锌副族金属离子在树脂上的吸附

研究了Ｚｎ２＋、Ｃｄ２＋、和Ｈｇ２＋离子在碱式纤维素基磁性聚偕胺肟树脂（ＢＭＡＯ）上的吸附动力学。结果表明，吸附速度受粒内扩散所控制。测得粒内扩散系数分别是１．２２×１０－４、２．４２×１０－４和３．９０×１０－４ｃｍ２·ｓ－１；Ｈｇ２＋离子在树脂上的吸附行为符合Ｆｒｅｕｎｄｌｉｃｈ和Ｌａｎｇｍｕｉｒ等温吸附方程；浓集因数随Ｈｇ２＋离子浓度降低而上升，有利于从稀溶液中除去Ｈｇ２＋离子。将树脂加至Ｚｎ２＋、Ｃｄ２＋或Ｈｇ２＋离子浓度为５０ｐｐｍ的溶液中，离子去除率分别是９６．１、９９．９和９９．３％。     

弱酸树脂D113对S-腺苷-L-蛋氨酸的交换行为及分离应用研究

考察了S-腺苷-L-蛋氨酸 (S-adenosyl-L-methionine, SAM) 在弱酸树脂争光D113上的静态吸附及分离行为,利用Langmuir等温式对平衡等温线进行了拟合,实验表明,随着pH的提高,平衡交换量增加,提高温度和SAM的初始浓度在一定程度上能促进内扩散过程,利用D113树脂在f 1.7×30.0cm小型柱上从酵母提取液中分离SAM的得率为90%以上,纯度达87%以上。     

Ti4+修饰阳离子交换树脂催化制备环已烯

在Ti^4 修饰阳离子交换树脂催化剂上进行了环己醇脱水制备环己烯的反应，考察了催化剂吸附毗啶的FT-IR，证实了该催化剂表面具有Bronsted酸和Lewis酸性住是催化环己烯脱水反应的物质基础，实验结果表明：修饰树脂具有较高的热稳定性，Ti^4 交换容量对阳离子交换树脂的催化活性存在着明显的影响，催化剂对环己醇脱水制环己烯反应的活性高，并得到该反应的优化条件如下：环己醇40g，催化剂5g，反应温度175℃，反应时问60min，在此条件下，环己烯的产率达89％。     

时间分辨激光光散射测量系统

自选设计，装配了一套时间分辨的激光光散射测量系统，该系统摄像机，录像机，计算机和自编的软件实现了一体化的数据采集，显示和分析过程，本文给出了该系统的应用实例，球晶的光散射和环氧树脂的固化反应诱导的相分离过程。     

Elastic Moduli and Activation Energies for an Epoxy/m-XDA System by DMA and DSC

The influence of the resin/diamine ratio on the properties of the system diglycidyl ether of bisphenol A (BADGE n=0/m-xylylenediamine) (m-XDA) was studied. Variation of this ratio resulted in significant effects on the cure kinetics and final dynamic mechanical properties of the product material. The study was made in terms of storage modulus (E′), vss modulus (E″) and molecular mass between cross-links (M_c) at different ratios. Two geometries (cylindrical and rectangular) were considered. The influence of temperature was studied through the activation energy (E_a>), which depends on the epoxy/amine ratio and the geometry of the samples. Glass transition temperatures (T_g>) and glass transition temperatures for thermosets with null degree of conversion (T_go>) were determined by DSC. T_g> decreases when amounts of curing agent greatly in excess of the stoichiometric composition were used. This revised version was published online in July 2006 with corrections to the Cover Date.     

2-HBR负载树脂分离富集金的研究及其分析应用

本文探讨了２－羟基苄叉罗丹宁（２－ＨＢＲ）负载树脂对金的吸附性能及用ＡＡＳ吸附金的酸效应、吸附动力学、吸附机理、吸附热力学、动态试验等。     

On-line preconcentration using dual mini-columns for the speciation of chromium(III) and chromium(VI) and its application to water samples as studied by inductively coupled plasma-atomic emission spectrometry

On-line preconcentration system for the selective, sensitive and simultaneous determination of chromium species was investigated. Dual mini-columns containing chelating resin were utilized for the speciation and preconcentration of Cr(III) and Cr(VI) in water samples. In this system, Cr(III) was collected on first column packed with iminodiacetate resin. Cr(VI) in the effluent from the first column was reduced to Cr(III), which was collected on the second column packed with iminodiacetate resin. Hydroxyammonium chloride was examined as a potential reducing agent for Cr(VI) to Cr(III).The effects of pH, sample flow rate, column length, and interfering ions on the recoveries of Cr(III) were carefully studied. Five millilitres of a sample solution was introduced into the system. The collected species were then sequentially washed by 1 M ammonium acetate, eluted by 2 M nitric acid and measured by ICP-AES. The detection limit for Cr(III) and Cr(VI) was 0.08 and 0.15 μg l⁻¹, respectively. The total analysis time was about 9.4 min.The developed method was successfully applied to the speciation of chromium in river, tap water and wastewater samples with satisfied results.     

Preparation of crosslinked polystyrene-supported ethylenediamine via a S-containing spacer and adsorption properties towards metal ions

Two novel chelating resins were prepared by anchoring ethylenediamine to crosslinked polystyrene via a spacer containing sulfide. Their structures were characterized by Fourier transform-infrared spectra (FTIR) and scanning electron microscopy (SEM). Porous structure parameters of the resins were measured by ASAP 2020 using BET and BJH methods. Their adsorption capacities for several heavy metal ions especially Hg²⁺ were investigated. The results showed that for the two resins, the more N contents did not mean the better adsorption capacity and the saturated adsorption capacity of poly(2-ethylenediamidomercaptomethylstyrene) (PSM-EDA) for Hg²⁺ could reach to 3.0 mmol/g at room temperature. Isothermal adsorptions of the resins for Hg²⁺ could be described by Langmuir formula. The adsorption mechanism of the resins for Hg²⁺, Cu²⁺ and Ag⁺ was confirmed by X-ray photoelectron spectroscopy (XPS) and FTIR.     

Preconcentration and speciation of chromium using a melamine based polymeric sequestering succinic acid resin: its application for Cr(VI) and Cr(III) determination in wastewater

A new melamine based polymeric sequestering resin was prepared for preconcentration and separation of hexavalent chromium from water, and its sequestering action was investigated. The water-insoluble, cross-linked sequestering resin was formed by reaction with bromosuccinic acid and cross-linking of melamine. The active sequestering group on the resin is NH-(Succinic acid) or salt thereof. The resulting chelating resin was characterized by infrared spectra. The newly prepared resin quantitatively retained Cr(VI) at pH 2.0-4.0 when the flow rate was maintained between 1 and 5 ml min⁻¹. The retained Cr(VI) was instantaneously eluted with 25 ml of 0.1 M NaOH. The chromium species were determined by a flame atomic absorption spectrometer. The limits of detection for Cr(VI) and Cr(III) were found to be 5.3 and 4.2 μg l⁻¹, respectively. The precision and accuracy of the proposed procedure was checked by the use synthetic and reference steel samples. The established preconcentration method was successfully applied to the determination and selective separation of Cr(VI) in electroplating industry wastewater. Total concentrations determined by the spectrophotometric method (110.3±0.6 g l⁻¹ Cr(VI) and 1.2±0.3 g l⁻¹ Cr(III)) are compared with those found by FAAS and the obtained results (110.4±1.8 g l⁻¹ Cr(VI) and 1.4±0.5 g l⁻¹ Cr(III)) show good agreement.     

Curing of liquid epoxy resin in plasma discharge

Epoxy resins in the solid state, liquid state and during polymerisation were treated by microwave oxygen plasma and analysed by FTIR spectra. Curing, etching and oxidation kinetics of epoxy resin were observed. In the liquid resin and polymerising mixture the effect of structure modification was observed more intensively than in the case of solid sample due to a mixing process. A modification of bulk layers of liquid epoxy resin was observed under plasma action. The polymerisation reaction of epoxy resin with amine hardening agent can be released in plasma discharge at low pressure.