A novel approach for introducing particulate matter into thermal plasmas: The triple-cathode arc

A coalesced high-intensity dc discharge is maintained between three cathodes and a single anode, stabilized by using resistors on each cathode leg. Jets of plasma gas are produced from either the cathode area or the anode area of the device. Cathode jets are generated by the self-induced pumping at the cathode tips and augmented by central gas injection. Arc voltage-current characteristics show classical convection-stabilized arc behavior. Anode heat transfer rates may be substantially increased by central gas injection toward the anode. Temperature fields in the coalesced, axially symmetric portion of the arc are determined spectrometrically and compared to those of a classical single-cathode free-burning arc.     

工作用玻璃液体温度计温度修正值的测量不确定度分析

依据JJF1059－1999，利用二等水银湿度计标准装置，分析了工作用玻璃液体温度计温度修正值的测量不确定度。当温度测量点为20℃时，工作用玻璃液体温度计温度修正值的扩展不确定度为0.054℃，当温度测量点为95℃时，工作用玻璃液体温度计温度修正值的扩展不确定度为0.055℃。     

Conformational studies of basic poly (α-amino acid)s in reversed micelles

The conformation of various basic poly (-amino acid)s was investigated by CD measurements in aqueous solutions containing bis (2-ethylhexyl)sodium sulfosuccinate (AOT) as well as in the AOT reversed micelles. The addition of AOT into an aqueous solution of poly(L-lysine) induces the conformational transition from coil to ordered structure, followed by aggregation. On the other hand, poly(L-lysine) assumes-structure in the reversed micelles at low w_ovalue (w_o=[H₂O]/[AOT]). Similarly to poly(L-lysine), poly(L-ornithine) takes an ordered structure in the aqueous solution containing AOT and-structure in the reversed micelles. In this case, however, these ordered structures are not so stable, compared with that of poly(L-lysine). Poly(L-arginine) undergoes the conformational transition from coil to helix by addition of AOT into the aqueous solution. Further addition of AOT allows transformation into-structure. Copoly(L-lysyl-L-leucine) with 63% leucine residue was shown to take a stable helical conformation even in pure water. In the reversed micelles, however, this ordered structure is significantly changed probably because the hydrophobic interaction among the leucyl residues is lowered in the reversed micelles.     

Determination of uncertainty for hardness measurement: proposal of the standard,available software

After the next revision of the ISO-standards for hardness testing (ISO 6506–6508) an estimation of the uncertainty (ISO/IEC 17025, ISO 5725) is mandatory. The two proposed approaches of part one (ISO 6506–6508) of the ISO Standards for hardness are exemplified. The calculation approach implemented in an Excel-based file, which is available via , is announced.Presented at the Metro Trade Workshop on Traceability and Measurement Uncertainty in Testing, 30–31 January 2003, Berlin, Germany     

Conductivities and silver electrode polarization resistance of solid electrolyte ceramics from ZrO2-Y2O3 powder synthesized in air plasma

Ceramic specimens have been obtained from the powder of ZrO₂-7.5 mol% Y₂O₃ having a specific surface area of 30 m²/g synthesized in air plasma. The novelty of this research lies in the fact that the plasma process makes it possible to prepare so-called nanopowders with a particle size less than 100 nm, possessing specific physical, chemical and technological properties. The sintered density of the specimens was 94–96% of the theoretical value, 6.001 g/cm³. The X-ray diffraction pattern of the specimens corresponded to a face-centered cubic lattice. Impedance in the frequency range of 100 Hz–15 MHz and d.c. polarization curves in a potential range of −10 to 10 mV were measured in the temperature range 200–850 °C in heating and cooling cycles. The intragrain, the grain boundary and the total bulk conductivities, the electrode polarization resistance and their activation energies were determined. The thermal stability of the studied system was proved in three measurement series up to 600–850 °C in heating and cooling cycles. The results obtained have shown that the conductivity of ZrO₂-7.5 mol% Y₂O₃ ceramics is not solely a function of temperature, but also depends on the previous thermal state of the ceramics. Received: 16 October 1997 / Accepted: 19 January 1998     

腔长失调对光腔衰荡法测量精度的影响

 只考虑腔长失调因素下建立了反射率模拟测量的理论模型。根据高斯光束传输规律分析了腔长失调对衰荡腔模式耦合的影响，推导了腔长失调与谐振腔输出脉冲信号、衰荡信号与反射率之间的关系，模拟了腔长失调在±10mm范围内的光脉冲衰荡现象。结果表明：对于光敏面直径为0.2mm的高速探测器，为了保证10^-6的测量精度，腔长的失调量应控制在±1mm之间。在光路调节中采用具有对数变换功能的示波器和动态范围较大的探测器，可以提高测量精度。     

Observations of Bell Inequality Violations with Causal Isolation between Source and Detectors

We report the experimental observations of Bell inequality violations (BIV) in entangled photons causally separated by a rotating mirror. A Foucault mirror gating geometry is used to causally isolate the entangled photon source and detectors. We report an observed BIV of CHSH-S=2.30±0.07>2.00. This result rules out theories that explain correlations with traveling communication between source and detectors, including super-luminal and instantaneous communication.     

苯乙烯/丙烯酸正丁酯乳液聚合反应过程中残余单体含量的实时监测

采用近红外光谱分析技术在线测量苯乙烯(St)/丙烯酸正丁酯(BA)乳液聚合体系中残余单体的含量. 共设计9个半连续方式的St/BA乳液共聚反应, 在反应过程中实时取样测量其残余单体含量, 并记录取样时刻对应的聚合体系的近红外光谱. 采用多元散射校正法(MSC)处理光谱, 有效地克服了乳胶粒子散射效应对近红外光谱分析的影响. 采用主成分分析法(PCA)对乳液体系的近红外光谱数据进行了解析. 选取6个聚合反应对应不同反应时间的72个样品, 用于建立校正模型, 另外3个聚合反应共取36个样品用于校正模型的验证, 并在反应设计上体现了乳化剂用量的变化, 从而使校正模型对乳化剂用量的变化具有一定的适应性. 研究结果表明, 所得模型对残余单体St和BA含量的预测结果标准差(SEP)分别为0.08026和0.05305.