有机分析研究进展——单原子、单分子、单细胞的分析进展

简要地对单原子、单分子、单细胞的分析方法和研究进展情况进行了评述 ,共引用文献 193篇     

燃料电池用质子交换膜的研究进展

质子交换膜燃料电池 (PEMFC)以质子交换膜 (PEM )作为电解质和隔膜 ,其性能强烈地依靠PEM的性质 .本文分析了PEMFC对PEM的要求 ,对全氟化、部分氟化和非氟化的PEM进行了分类介绍 ,着重讨论了膜的结构、制备、性质以及它们在PEMFC中的应用     

Evaluation of photodynamic therapy (PDT) procedures using microfluidic system

A hybrid PDMS/glass microfluidic system for evaluation of the efficiency of photodynamic therapy is presented. 5-aminolevulinic acid (ALA) was used as a precursor of photosensitizer. The geometry of the microdevice presented in this paper enables to test different concentrations of the photosensitizer in a single assay. The viability of the A549 cells was determined 24 h after PDT procedure (irradiation with light which induced a photosensitizer accumulated in carcinoma cells, λ = 625 nm). The presented results confirmed the possibility to perform the photodynamic therapy process in vitro in microscale and the possibility to assess its effectiveness. Moreover, because two identical microstructures on a single chip were performed, the microchip can be used for examination simultaneously various cell lines (carcinoma and normal) or various photosensitizers.     

Physics-based plasticity model incorporating microstructure changes for severe plastic deformation

During machining processes, materials undergo severe deformations that lead to different behavior than in the case of slow deformation. The microstructure changes, as a consequence, affect the materials properties and therefore influence the functionality of the component. Developing material models capable of capturing such changes is therefore critical to better understand the interaction process–materials. In this paper, we introduce a new physics model associating Mechanical Threshold Stress (MTS) with Dislocation Density (DD) models. The modeling and the experimental results of a series of large strain experiments on polycrystalline copper (OFHC) involving sequences of shear deformation and strain rate (varying from quasi-static to dynamic) are very similar to those observed in processes such as machining. The Kocks–Mecking model, using the mechanical threshold stress as an internal state variable, correlates well with experimental results and strain rate jump experiments. This model was compared to the well-known Johnson–Cook model that showed some shortcomings in capturing the stain jump. The results show a high effect of rate sensitivity of strain hardening at large strains. Coupling the mechanical threshold stress dislocation density (MTS–DD), material models were implemented in the Abaqus/Explicit FE code. The model shows potentialities in predicting an increase in dislocation density and a reduction in cell size. It could ideally be used in the modeling of machining processes.     

双光子激发荧光成像技术对小鼠植入前胚胎的实时观测

双光子激发的蓝移效应可使利用同一束超快激光同时激发多种不同荧光特性的生物荧光染料的设想得以实现。选取锁模飞秒掺钛蓝宝石(Ti-sapphire)激光器输出的730nm激光,分别激发Hoechst33342,Fluo-4,PI和Indo-1四种常用生物荧光染料,分别利用(455±15)nm,(540±15)nm,(580±16)nm和(500±15)nm四种滤光片获得特异性荧光图像。结合双光子激发荧光成像技术穿透深,光损伤小,信噪比好等优势,选取合适的荧光染料组,应用单束激光激发、双染双通道成像方法,对小鼠植入前胚胎内细胞中的钙信号和染色体进行三维、四维实时成像,为探究小鼠植入前胚胎发育规律提供一种全新的多参数观测手段。     

新型BODIPY荧光染料的合成及光谱性质研究

传统的BODIPY荧光染料具有荧光量子效率高、摩尔消光系数大、紫外吸收和荧光发射峰窄等优点,然而这类荧光染料普遍存在荧光发射波长短和Stokes位移小的缺点,因而限制了它们在体内生物传感及成像方面的广泛应用。为了得到荧光发射波长较长和Stokes位移大的BODIPY荧光染料,以BODIPY母核为基本结构,通过在它的8位连接吸电子性质的酯基来增加分子内电荷转移程度,同时在其3,5位引入供电子的芳香取代基增加分子的π共轭结构,合成得到了一类8位酯基取代的新型BODIPY荧光染料。所得到的新型BODIPY荧光染料的化学结构经过1H NMR, 13C NMR和HR-MS得以确认。光谱测试结果表明,这类染料的紫外吸收光谱(λ_abs=536 nm)和荧光发射光谱(λ_em=592 nm)与普通的BODIPY相比都发生显著红移(80 nm),并且保持了较高的荧光量子效率(Ф=0.43)。此外,这类BODIPY荧光染料的紫外可见吸收光谱和荧光发射光谱几乎完全分开,Stokes位移长达60 nm,可以有效地避免自吸收和生物样品的背景干扰。密度泛函理论计算结果表明,这种相对较大的Stokes位移主要是由于染料分子在基态和激发态下不同的几何构型所造成的。该类化合物的光物理性能受溶剂的影响小,是一类性能优良的新型荧光染料。细胞成像结果表明,染料1具有良好的细胞渗透性和光稳定性,可以实现对细胞的荧光成像。     

极低频高压脉冲电场对萌发玉米种子超弱发光的影响

生物超弱发光是来自细胞的电磁信号,在揭示电磁生物学效应的机理研究中具有重要作用.为了研究极低频脉冲电场生物学效应及其机理,采用基于玉米细胞电位波动频率的1 Hz极低频高压脉冲电场处理萌发玉米种子,结果发现玉米种子的萌发过程明显加快,根长和芽长均有显著增长.对萌发种子的自发发光和延迟发光的测量结果显示,1 Hz极低频高压脉冲电场对萌发过程中玉米种子的自发发光和延迟发光积分强度都有明显的促进作用,表明1 Hz极低频高压脉冲电场加速了玉米种子萌发过程中的DNA合成和细胞代谢.     

火焰原子吸收光谱法测定钴-镍合金镀层中的钴和镍

利用原子吸收光谱法研究了在氨基磺酸钴-镍镀液中，赫尔槽试片上不同电流密度区合金镀层中钴、镍的含量。实验表明，该方法简便，快捷，结果准确，精密度高。相对标准偏差（RSD）为0.30%-0.62%，加标回收率为97.0%-104.0%。     

细胞培养基的吸收光谱研究

使用日本岛津UV 310 1分光光度计分别测量培养了宫颈癌细胞 (Hela)和鼻咽癌细胞 (CNE)的RP MI 16 4 0培养基和DMEM高糖培养基的紫外吸收光谱 ,分析了培养基中蛋白质的紫外吸收特性。RPMI16 4 0培养基的 2 2 7nm吸收峰在培养细胞生长过程中位移至 2 2 2或 2 18nm ,2 78nm的吸收峰位移至 2 80nm ;而DMEM高糖培养基 2 2 4nm吸收峰在培养细胞生长过程中位移至 2 2 1nm附近 ,2 78nm吸收峰基本没有位移。这些位移说明培养基中芳香族氨基酸中各种氨基酸如色氨酸和酪氨酸的含量有变化。也就是说 ,癌细胞在生长过程中对色氨酸和酪氨酸的消耗不是按等量比的。实验也说明Hela和CNE在生长过程中 ,对RPMI 16 4 0培养基和DMEM高糖培养基中氨基酸的消耗是不同的。实验结果为癌细胞生长过程中所需培养基中氨基酸的含量提供了依据     

A cell functional minimization scheme for parabolic problem

We are interested in a robust and accurate finite volume scheme for 2-D parabolic problems derived from the cell functional minimization approach. The scheme has a local stencil, is locally conservative, treats discontinuity rigorously and leads to a symmetric positive definite linear system. Since the scheme has both cell centered unknowns and cell edge unknowns, the computational cost is an issue and a parallel algorithm is then suggested based on nonoverlapping domain decomposition approach. The interface condition is of the Dirichlet–Robin type and has a parameter λ. By choosing this parameter properly, the convergence of the iteration process could be sped up. Numerical results for linear and nonlinear problems demonstrate the good performance of the cell functional minimization scheme and its parallel version on distorted meshes.