In-situ grown metal organic framework synergistic system for the enantioseparation of three drugs in open tubular capillary electrochromatography

Metal organic frameworks have received great attention as the chiral stationary phase for racemic drug separation because of their fascinating structures and properties. However, the most homochiral metal organic frameworks were constructed by rare and precious chiral organic ligands. In this work, an achiral metal organic framework, together with a natural chiral selector carboxymethyl β-cyclodextrin built a synergistic separation system in the open tubular capillary electrochromatography. The novel coated columns were developed by inducing metal organic framework nanoparticles to grow on the imidazolyl functional capillary inner wall. The baseline separations of hydroxychloroquine, ofloxacin, and atenolol were achieved in the synergistic separation system. The effects of the concentration of chiral selector, pH, voltage, and the concentration of organic additives were studied. Compared with chiral selector auxiliary bare capillary, the resolutions of three drugs were remarkably improved. The relative standard deviations for the retention time of intraday (n = 6), interday (n = 6), and column-to-column were less than 2.1, 2.6, and 5.2%, respectively. These results demonstrate that affordable synergistic separation systems are prospective for racemic drug enantioseparation in capillary electrochromatography.     

Characterization of a highly stable zwitterionic hydrophilic interaction chromatography stationary phase based on hybrid organic–inorganic particles

We have characterized a sulfobetaine stationary phase based on 1.7 μm ethylene-bridged hybrid organic–inorganic particles, which is intended for use in hydrophilic interaction chromatography. The efficiency of a column packed with this material was determined as a function of flow rate, demonstrating a minimum reduced plate height of 2.4. The batch-to-batch reproducibility was assessed using the separation of a mixture of acids, bases, and neutrals. We compared the retention and selectivity of the hybrid sulfobetaine stationary phase to that of several benchmark materials. The hybrid sulfobetaine material gave strong retention for polar neutrals and high selectivity for methyl groups, hydroxy groups, and configurational isomers. Large differences in cation and anion retention were observed among the columns. We characterized the acid and base stability of the hybrid sulfobetaine stationary phase, using accelerated tests at pH 1.3 and 11.0, both at 70°C. The results support a recommended pH range of 2–10. We also investigated the performance of columns packed with this material for metal-sensitive analytes, comparing conventional stainless steel column hardware to hardware that incorporates hybrid surface technology to mitigate interactions with metal surfaces. Compared to the conventional columns, the hybrid surface technology columns showed a greatly improved peak shape.     

Scale-Up Preparation of Crocins I and II from Gardenia jasminoides by a Two-Step Chromatographic Approach and Their Inhibitory Activity Against ATP Citrate Lyase

Crocins are highly valuable natural compounds for treating human disorders, and they are also high-end spices and colorants in the food industry. Due to the limitation of obtaining this type of highly polar compound, the commercial prices of crocins I and II are expensive. In this study, macroporous resin column chromatography combined with high-speed counter-current chromatography (HSCCC) was used to purify crocins I and II from natural sources. With only two chromatographic steps, both compounds were simultaneously isolated from the dry fruit of Gardenia jasminoides, which is a cheap herbal medicine distributed in a number of countries. In an effort to shorten the isolation time and reduce solvent usage, forward and reverse rotations were successively utilized in the HSCCC isolation procedure. Crocins I and II were simultaneously obtained from a herbal resource with high recoveries of 0.5% and 0.1%, respectively, and high purities of 98.7% and 99.1%, respectively, by HPLC analysis. The optimized preparation method was proven to be highly efficient, convenient, and cost-effective. Crocins I and II exhibited inhibitory activity against ATP citrate lyase, and their IC₅₀ values were determined to be 36.3 ± 6.24 and 29.7 ± 7.41 μM, respectively.     

酰胺修饰杂化硅胶整体柱的制备及其在莱克多巴胺检测中的应用

以氧化琼脂糖（AG）和四甲氧基硅烷（TMOS）为前驱体,通过溶胶－凝胶法制备 AG/SiO2整体柱,利 用酰胺化反应对整体柱进行酰胺基团修饰。通过X射线光电子能谱（XPS）、傅里叶变换红外光谱（FTIR）、N2 吸附－脱附和扫描电镜（SEM）等表征手段对所制备材料的结构和形貌进行分析。结果显示酰胺基团被成功修 饰至整体柱,该材料具有良好的通透性及较大的比表面积。以其为固相微萃取介质对羊肉中的莱克多巴胺进 行萃取富集,在优化的样品前处理条件下,采用基质添加标准曲线法,结合高效液相色谱－紫外（HPLC－ UV）检测,建立了羊肉中痕量莱克多巴胺的分析方法。该方法在 1. 94～1 170 ng/g范围内线性良好,相关系 数（r 2 ）为 0. 993 1,检出限（LOD）和定量下限（LOQ）分别为0. 618、1. 94 ng/g,3个不同加标水平下样品的平均回 收率为86. 6%～103%,相对标准偏差（RSD,n = 5）为4. 8%～7. 3%。该方法具有检出限低、回收率高、样品用 量少等特点,可用于羊肉中痕量莱克多巴胺的灵敏检测。     

碳柱热电极的制备及应用

用铅笔芯制作了不同直径的碳柱热电极,表征了碳柱热电极的电化学和温敏等各种性质。结果表明,碳柱热电极在多次加热过程中均表现出对温度变化的快速响应以及良好的热稳定性。将其应用于痕量铅的方波阳极溶出伏安法测定,65℃时灵敏度比常温高,Pb2＋浓度在1~22μg/L呈线性关系,线性回归系数r=0.995 5,检测限0.5μg/L。     

毛细管柱气相色谱法测定食品中甜蜜素

应用毛细管柱气相色谱法测定了食品中甜蜜素。选择弱极性的DB-5型毛细管色谱柱(0.53mm×30m,1.0μm)作为分离柱,采用氢火焰离子化检测器。对固体样品的处理方法改用粉碎机打碎,并按样品的类别分别用水或经石油醚提取去脂后,再用水超声提取,离心分离并过滤后取其滤液供色谱分析。甜蜜素的质量浓度在0.01~1.0g·L-1范围内与峰面积呈线性相关,检出限(3S/N)为1ng。在3个浓度水平进行加标回收试验,回收率在90.9%~99.5%之间,测定值的相对标准偏差(n=5)在2.9%~6.8%之间。按此法测定了30个食品样品中甜蜜素的含量,所得测定值与欧盟标准方法(EN 12857)测定值相符。     

Rapid,simple and selective determination of 2,4-dinitrophenol by molecularly imprinted spin column extraction coupled with fluorescence detection

A rapid, simple and selective method based on molecularly imprinted, spin column extraction coupled with fluorescence detection was successfully established for the determination of 2,4-dinitrophenol in serum samples. The 2,4-dinitrophenol imprinted polymers exhibited highly selective recognition for the template molecule and the maximum adsorption capacity was 138.9 mg/g. The results indicated that when water is used as the loading solution, only 2,4-dinitrophenol could be adsorbed on the spin column without the remaining structural analogs（2-nitrophenol, 4-nitrophenol and phenol）. After eluting with acetonitrile/acetic acid（9/1, v/v）, 2,4-dinitrophenol in serum samples could be determined by using the fluorescence spectrometer, based on the fluorescence enhancement of fluorescein by the template molecule. Under the optimal conditions, the spiked recovery ranged from 95.8% to 103.4% and the detection limit was 1 nmol/L. The results confirmed the reliability and practicality of the protocol and revealed a good perspective of this method for biological sample analysis.     

紫外分光光谱法快速测定原料油中芳香烃的含量

应用紫外分光光谱技术建立了快速测定原料油中芳香烃含量的方法。分别以色谱分离法提纯的蜡油、柴油芳香烃组分为标准物,绘制标准曲线。实验表明蜡油和柴油中芳香烃的含量与吸光度具有良好的线性关系(相关系数r2分别为0.999 73,0.999 44),蜡油和柴油中芳烃的加标回收率分别为96.83%,98.97%。蜡油和柴油中芳烃测定结果的相对标准偏差分别为0.32%～0.98%,0.89%～1.52%(n=6)。该方法进行原料油可磺化有效组分的检测快速可靠,能更好地应用于实际生产。     

基于氦离子化气相色谱法测定微量氧、氮的影响因素

探讨氦离子化气相色谱法测定样品中微量氧、氮含量的影响因素。采用控制变量法,对色谱柱温度、进样流量、进样管道环境及极化电压等因素对微量氧、氮测定结果的影响进行讨论和分析。结果表明,当色谱柱温度为25~45℃时,色谱柱对氧、氮吸附量最小;当进样流量不小于70 mL/min时,微量氧、氮测定结果受外界干扰最小;当极化电压为80~160 V时,氧、氮具有最佳的响应值;初次测定样品中微量氧、氮含量时,需使进样管道表面吸附的氧、氮处于饱和状态,以便获得理想的测定结果。讨论的结果可为氦离子化气相色谱法测定相关样品中微量氧、氮含量时提供技术参考。     

HF激光脉冲与水柱表面相互作用产生电信号(英文)

研究了脉冲HF激光与水柱表面相互作用下电信号的产生过程。电信号显示了与激光能量线性相关的峰值间有时间间隔的两峰结构,且第二个尖峰在水柱底部的蒸汽腔塌缩后出现。实验还显示电信号的幅值和激光脉冲照射过程中是否存在膨胀和挤压的薄水层密切相关。如果在电池上边缘和石英平板(石英板紧邻电池,并与水柱上表面相接)之间存在一薄水层,电信号强度会增加10倍。